Synthesis of [1]benzothieno[3,2-b][1]benzothiophene (BTBT) and its higher homologs through palladium-catalyzed intramolecular decarboxylative arylation

We report herein an effective method for the construction of 4- and 7-ring benzo-fused thieno[3,2-b]thiophenes, involving palladium-catalyzed intramolecular decarboxylative arylation as the key step.     

Investigation of Mizoroki‐Heck coupling polymerization as a catalyst‐transfer condensation polymerization for synthesis of poly(p‐phenylenevinylene)

Mizoroki‐Heck coupling polymerization of 1,4‐bis[(2‐ethylhexyl)oxy]‐2‐iodo‐5‐vinylbenzene ( 1 ) and its bromo counterpart 2 with a Pd initiator for the synthesis of poly(phenylenevinylene) (PPV) was investigated to see whether the polymerization proceeds in a chain‐growth polymerization manner. The polymerization of 1 with ^tBu₃PPd(Tolyl)Br ( 10 ) proceeded even at room temperature when 5.5 equiv of Cy₂NMe (Cy = cyclohexyl) was used as a base, but the molecular weight distribution of PPV was broad. The polymerization of 2 hardly proceeded at room temperature under the same conditions. In the polymerization of 1 , PPV with H at one end and I at the other was formed until the middle stage, and the polymer end groups were converted into tolyl and H in the final stage. The number‐average molecular weight (M_n) did not increase until about 90% monomer conversion and then sharply increased after that, indicating conventional step‐growth polymerization. The occurrence of step‐growth polymerization, not catalyst‐transfer chain‐growth polymerization, may be interpreted in terms of low coordination ability of H‐Pd(II)‐X(^tBu₃P) (X = Br or I), formed in the catalytic cycle of the Mizoroki‐Heck coupling reaction, to π‐electrons of the PPV backbone; reductive elimination of H‐X from this Pd species with base would take place after diffusion into the reaction mixture. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 543–551     

Total Synthesis of an Exceptional Brominated 4‐Pyrone Derivative of Algal Origin: An Exercise in Gold Catalysis and Alkyne Metathesis

A concise approach to the algal metabolite 1 is described, which also determines the previously unknown stereostructure of this natural product. Compound 1 is distinguished by a rare brominated 4‐pyrone nucleus linked as a ketene–acetal to a polyunsaturated macrocyclic scaffold comprising an extra homoallylic bromide entity. The synthesis of 1 is based on the elaboration and selective functionalization of the linear precursor 23 endowed with no less than six different sites of unsaturation including the highly enolized oxo‐alkanoate function. Key to success was the formation of the 2‐alkoxy‐4‐pyrone ring by a novel gold‐catalyzed transformation which engages only the acetylenic β‐ketoester substructure of 23 but leaves all other π‐bonds untouched. The synthesis was completed by a ring‐closing alkyne metathesis to forge the signature cycloalkyne motif of 1 followed by selective bromination of the ketene–acetal site in the resulting product 27 without touching the skipped diene–yne substructure resident within the macrocyclic tether.     

Poly(p‐benzamide) having isopropyl‐substituted chiral tri(ethylene glycol) side Chain: Synthesis and helical conformation

Isopropyl‐substituted tri(ethylene glycol) is used as a chiral side chain of N‐substituted poly(p‐benzamide) in order to increase the difference of stability between the right‐ and left‐handed helical structures of the polymer. The target polymer is synthesized by the chain‐growth condensation polymerization of the corresponding monomer with an initiator using lithium 1,1,1,3,3,3‐hexamethyldisilazide as a base. A circular dichroism (CD) study of the polymer reveals that the CD signal is due to an excess of a thermodynamically controlled right‐handed helical structure of the polymer, and that the replacement of the methyl group with a bulkier isopropyl group at the side chain of poly(p‐benzamide) increases the abundance of right‐handed helical structure in chloroform. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1623–1628     

Control of chain ends of polyesters in polycondensation of AA and BB monomers by use of solid‐phase reagent

For selective synthesis of linear polyester having a functional group at one end, polycondensation between 1,4‐butanediol ( 1a ) and sebacoyl chloride ( 2a ) and between 1,12‐dodecanediol ( 1b ) and isophthaloyl chloride ( 2b ) was conducted in the presence of oxime resin or oxime silica gel, followed by cleavage of the formed polyester from the solid‐phase support with aniline. Matrix‐assisted laser desorption ionization time‐of‐flight mass spectra and ¹H NMR spectra of the cleaved polyester showed that the products contained not only polyester with anilide at one end ( poly 1 ), but also polyester with anilides at both ends ( poly 2 ). The product ratio of poly 1 to poly 2 ( poly 1 / poly 2 ) was dependent on monomers, monomer concentration, feed ratio of monomer to oxime moiety in the support, oxime content in the support, reaction solvent, and the nature of the support. Polyester with a high poly 1 / poly 2 ratio of 81/21 and moderate molecular weight (M_n = 1430 g/mol) was obtained by polycondensation of 1b and 2b in the presence of oxime silica gel in dichloromethane. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1379–1386     

ESR and calculations on electronic structure of phenalenyl and phenalenyl derivative radicals

Calculations on electronic structure of the perinaphthenyl radical and phenalenyl derivative radicals responsible for the composition of the ESR spectrum of marine diesel under heating were performed to obtain support for the experimental ESR results. The parameters calculated were the hyperfine coupling constants (A), which were then used for comparison with the experimental data. The energy‐minimized structures were obtained using the density functional theory method. In all cases, the symmetry system was taken into account in theoretical calculations. The differences between experimental and theoretical values were below 7% for nearest hydrogens in molecules, named hyperfine coupling constant A (first neighbors) and 18% for farthest hydrogens atoms named hyperfine coupling constants A′ (second neighbors), for all structures analyzed. Copyright © 2014 John Wiley & Sons, Ltd.     

A Non‐Enzymatic Pathway with Superoxide in Intracellular Terpenoid Synthesis

Non‐C₅‐units terpenoids (norisoprenoids) with an acetonyl group are widely distributed in nature. However, studies on the biosynthesis of norisoprenoids are scarce. Now, the C₃₃ norisoprenoid, (all‐E)‐farnesylfarnesylacetone, was identified from Bacillus spp. and it was elucidated for the first time that superoxide mediates the cleavage of menaquinones (vitamin K) to form norisoprenoids in saponification treatment. From in vivo experiments using gene‐disrupted Bacillus subtilis strains targeted for enzymes responsible for menaquinone biosynthesis and for superoxide dismutase, it was suggested that the non‐enzymatic cleavage (autoxidation) of menaquinone with superoxide resulted in norisoprenoid synthesis in Bacillus cells. Furthermore, the bioactive norisoprenoids, farnesylacetone and phytone, were produced in Bacillus cells by this novel synthesis system.     

Fine-patterning on glass substrates by the sol-gel method

A novel process has been developed to form fine patterns on glass substrates. The process consists of the following steps: (1) coating of gel film on a substrate, (2) patterning on the gel film, and (3) heat-treatment. The key point in this process is the control of hardening of the gel films by the addition of organic polymers such as polyethylene glycol (PEG). The addition of PEG increased the viscosity of the coating solutions and delayed the gelation time, but had little effect on the optical properties of the resultant heat-treated glass films. The newly developed process is expected to be applicable to the formation of the optical devices such as diffraction gratings and pre-groovesof optical memory disks.     

Electrical transport in n-type semiconducting Ge120BixSe70−xTe10 glasses

Resistivity and thermoelectric power were measured as a function of temperature and composition for Ge₂₀Bi_xSe_70?xTe₁₀ glasses (x = 0–11). The results were compared with the case of of Ge₂₀Bi_xSe_80?x glasses to see on the electrical properties the influence of the substitution of Te for a part of Se. The glasses show n-type conduction for x ? 9, which was not affected by the substitution of Te. The resistivity was about three orders of magnitude lower for the glasses with x < 10, and remained almost the same for x ? 10, compared with the glasses not containing Te. From the composition dependence of the calculated concentration of covalent bonds in the glasses, it was proposed that the appearance of n-type conduction was closely related to the formation of a sufficient number of BiSe bonds and the disappearance of the bonds between two chalcogen atoms such as TeSe or SeSe bonds, and that the remarkably low resistivity in the present glasses with x < 10 was likely to be attributed to the formation of TeSe bonds.