Multiphoton double ionization of Ar in intense extreme ultraviolet laser fields studied by shot-by-shot photoelectron spectroscopy

Photoelectron spectroscopy has been performed to study the multiphoton double ionization of Ar in an intense extreme ultraviolet laser field (hν ～ 21 eV, ～ 5 TW/cm2), by using a free electron laser (FEL). Three distinct peaks identified in the observed photoelectron spectra clearly show that the double ionization proceeds sequentially via the formation of Ar(+): Ar+hν→Ar (+) + e? and Ar2(+) + 2hν→Ar(+) + e?. Shot-by-shot recording of the photoelectron spectra allows simultaneous monitoring of FEL spectrum and the multiphoton process for each FEL pulse, revealing that the two-photon ionization from Ar(+) is significantly enhanced by intermediate resonances in Ar(+).     

M?ssbauer spectroscopic study on valence-detrapping and trapping of mixed-valence trinuclear iron(III, III, II) fluorine-substituted benzoate complexes

Magnetorheological (MR) fluids are new iron-based materials, whose applications include brakes, dampers, clutches, shock absorbers systems and polishing of optical surfaces (lens and mirrors). They are dependent on the size and shape of particles as the magnetic properties. Interested in the possibility of using iron-rich powders, commonly used in nondestructive testing, ranging in size from a few μm to about 200?μm and lower cost than those commercially used for MR fluids, a study of the structural and magnetic properties of iron-rich metallic particles by X-ray diffraction (XRD) and M?ssbauer spectroscopy (MS) at room temperature has been done. Powders, as received, were separated into particle sizes smaller than 20?μm (sample A) and in the range of 20–38?μm (sample B) because these are the sizes generally required for applications in MR fluids. The particles whose sizes exceed the above values were ground in a high energy planetary mill for 3?h, using different values of rotational speed/time: 200?rpm for one hour, a pause of 10?s, 140?rpm for one hour, pause 10?s and then 175?rpm during the last hour. These powders were sieved to obtain particles smaller than 20?μm (sample C). According XRD results, in all samples, only α-Fe (lattice parameter a = 2,867(2) ?) and Fe₂O₃ (lattice parameter a = 5,037(1) ? and c = 13,755(8) ?) were present. The M?ssbauer spectra were fitted with two sextets. The hyperfine parameters values allowed us to assign the highest relative area spectrum (sextet) corresponding to α-Fe and the second one to Fe₂O₃ in accord to the XRD results. Thus, the preparation method using mechanical milling for diminishing the size of the metallic particles allowed us to get particles with size and magnetic properties that could lead to potentially MR fluids applications.     

Application of Protonic Acid-Doped Silica Gels to Electric Double-Layer Capacitors

Silica gels doped with several protonic acids such as HClO₄, H₂SO₄ and H₃PO₄ have been prepared by the sol-gel method and totally solid electric double-layer capacitors have been successfully fabricated using the highly proton-conductive silica gels as an electrolyte and activated carbon powder (ACP) hybridized with the silica gels as a polarizable electrode. It was found that the addition of HClO₄, which had the highest value of acid dissociation constant among these three acids, most effectively increased the proton conductivity of the resultant acid-doped silica gels. Tablets of the HClO₄-doped silica gels exhibited conductivities as high as 10^–5–10^–2 S cm^–1 at room temperature in dry N₂ atmosphere. One of the capacitors fabricated using the protonic acid-doped silica gels had a capacitance of 44 F/(gram of total ACP in the capacitor), which was comparable to those of conventional capacitors using liquid electrolytes.     

Steric bulk at position 454 in Saccharomyces cerevisiae lanosterol synthase influences B-ring formation but not deprotonation

[reaction: see text] Lanosterol synthase converts oxidosqualene to the tetracyclic sterol precursor lanosterol. The mutation experiments described here show that an active-site valine residue in lanosterol synthase contributes to cyclization control through steric effects. Mutating to smaller alanine or glycine residues allows formation of the monocyclic achilleol A, whereas the leucine and isoleucine mutants make exclusively lanosterol. The phenylalanine mutant is inactive.     

Synthesis of 3‐Acyl‐4‐alkenylpyrrolidines by Platinum‐Catalyzed Hydrative Cyclization of Allenynes

A series of nitrogen‐tethered allenynes (‘5‐aza‐1,2‐dien‐7‐ynes’) 1 were transformed to the corresponding 3‐acyl‐4‐alkenylpyrrolidines 3 when treated with a catalytic amount of PtCl₂ in MeOH at 70°. Initial Pt‐promoted cyclization forms a nonclassical carbocationic intermediate. In contrast to the cycloisomerization in toluene, which produced the bicyclic cyclobutenes 2 , the intermediate is intercepted by addition of an oxygen nucleophile to achieve the formal hydrative cyclization.     

Self-assembly of photochromic diarylethenes with amphiphilic side chains: reversible thermal and photochemical control

Diarylethene derivatives with hexaethylene glycol side chains were synthesized and their self-assembling and photochromic reactivity were investigated. The diarylethenes showed photochromism in organic solvents and even in water. The aqueous solution of the compounds turned turbid quickly upon heating. The clouding behavior was investigated using 1H NMR spectroscopy, dynamic light scattering, and absorption spectroscopy. It was revealed that, in the aqueous solution, the compounds self-assembled into aggregates, and the aggregates were loosened by raising the temperature. The cloud-point temperature of the closed-ring isomer was 5-7 degrees C lower than that of the open-ring isomer. When asymmetric methyl groups were introduced in the amphiphilic side chains, induced circular dichroism (ICD) was observed upon irradiation with UV light in water. This ICD was explained by the difference in the self-assembling behavior between the open- and the closed-ring isomers. It was suggested that the closed-ring isomers assembled into a chiral nanostructure.     

Intrinsic carrier doping in antiferromagnetically interacted supramolecular copper complexes with (pyrazino)tetrathiafulvalene (pyra-TTF) as the ligand, [CuIICl2(pyra-TTF)] and (pyra-TTF)2[CuI3Cl4(pyra-TTF)

New supramolecular copper complexes with pyrazinotetrathiafulvalene (pyra-TTF) as the ligand, [Cu(II)Cl2(pyra-TTF)] (1) and (pyra-TTF) 2[Cu(I)3Cl4(pyra-TTF)] (2), have been synthesized by the diffusion method. Complex 1 is a black block crystal with a three-dimensional (3-D) supramolecular network; the linear chain [-Cu(II)Cl2-(pyra-TTF)-] n extends along the b axis, where the coordinated pyra-TTF donors are stacked in a head-to-tail and ring-over-bond configuration to construct two-dimensional (2-D) sheets, and between the sheets, there are C...Cl(-) or H...Cl(-) contacts. Even though the electron spin resonance (ESR) measurement reveals the nearly Cu(II) state, complex 1 is a semiconductor with sigmaRT=1.0 x 10(-4) S cm(-1) and Ea=0.33 eV. The high-frequency conductivity measurement also confirmed the intrinsic slight carrier doping from Cu(II) to the pyra-TTF donor. This slight doping enhances not only the real and imaginary dielectric constants but also the antiferromagnetic interaction between Cu(II) spins following the 2-D Heisenberg model with 2J=-20 K. In contrast, complex 2 is a very thin black needle. This needle crystal has two crystallographically independent pyra-TTF molecules, which are coordinated and noncoordinated donors. The coordinated donors composed a supramolecular chain [Cu(I)3Cl4(pyra-TTF)(0)]n , whereas the noncoordinated donors formed conducting alpha'-type pyra-TTF(+0.5) sheets. This complex is semiconducting with sigmaRT=0.1 S cm(-1) and Ea=0.15 eV. Both complexes 1 and 2 demonstrate that the pyra-TTF molecule works not only as an oxidized donor by Cu(II) to construct conducting sheets but also as a ligand coordinated to a Cu cation to form supramolecuar chains.     

Medicinal flowers. XV. The structures of noroleanane- and oleanane-type triterpene oligoglycosides with gastroprotective and platelet aggregation activities from flower buds of Camellia japonica

The methanolic extract from the flowers buds of Camellia japonica L. (Theaceae) were found to exhibit potent inhibitory activities on ethanol- or indomethacin-induced gastric mucosal lesions in rats. Through bioassay-guided separation, 28-noroleanane-type triterpene oligoglycosides, camelliosides A, B, and C, and an oleanane-type triterpene oligoglycoside, camellioside D, were isolated from the methanolic extract together with five known compounds. The absolute stereostructures of camelliosides were determined on the basis of chemical and physicochemical evidence, which included the structure revision of the nortriterpene aglycons (camellenodiol and camelledionol). The principal oligoglycosides, camelliosides A and B, showed platelet aggregation activity in addition to the gastroprotective effects on ethanol- or indomethacin-induced gastric mucosal lesions in rats.     

Three-dimensional porous coordination polymer functionalized with amide groups based on tridentate ligand: selective sorption and catalysis

To create a functionalized porous compound, amide group is used in porous framework to produce attractive interactions with guest molecules. To avoid hydrogen-bond formation between these amide groups our strategy was to build a three-dimensional (3D) coordination network using a tridentate amide ligand as the three-connector part. From Cd(NO3)2.4H2O and a three-connector ligand with amide groups a 3D porous coordination polymer (PCP) based on octahedral Cd(II) centers, {[Cd(4-btapa)2(NO3)2].6H2O.2DMF}n (1a), was obtained (4-btapa = 1,3,5-benzene tricarboxylic acid tris[N-(4-pyridyl)amide]). The amide groups, which act as guest interaction sites, occur on the surfaces of channels with dimensions of 4.7 x 7.3 A2. X-ray powder diffraction measurements showed that the desolvated compound (1b) selectively includes guests with a concurrent flexible structural (amorphous-to-crystalline) transformation. The highly ordered amide groups in the channels play an important role in the interaction with the guest molecules, which was confirmed by thermogravimetric analysis, adsorption/desorption measurements, and X-ray crystallography. We also performed a Knoevenagel condensation reaction catalyzed by 1a to demonstrate its selective heterogeneous base catalytic properties, which depend on the sizes of the reactants. The solid catalyst 1a maintains its crystalline framework after the reaction and is easily recycled.