在粗糙表面上用液晶空间光调制器进行振动测量

为实现在一段时间内连续实时观测振动物体的全息干涉图形,采用覆盖铝箔的喇叭作为振动物体,利用铝箔原有未经特殊处理表面反射的漫反射光成像,并用光寻址液晶空间光调制器(Liquid crystal-sparial lightmodulator,LC-SLM)作为全息记录载体,来实现振动测量。实验中采用时间平均干涉测量法,得到了不同振动频率下物体的干涉图形。同时在连续改变振动物体的振动频率时,可以清晰地观察到物体振动全息干涉图形的变化过程,即近实时的全息干涉图形。     

Photopolyaddition of dithiols to bis(alkoxyallene)s

Polyadditions of 1,4-benzenedithiol (BDT) to bis(alkoxyallene)s, such as 1,4-bis(allenyloxy)xylene (3) and 1,4-bis(allenyloxy) benzene (4) , were carried out in benzene at 25°C by irradiation with a high pressure mercury lamp. Thiol groups were added to the terminal double bonds of the allenyloxy groups selectively to afford polymers containing reactive carbon–carbon double bonds in the main chain, similar to the radical polyadditions using azobis(isobutyronitrile) (AIBN). The molecular weight of the polymer obtained from BDT and 3 was 10 times higher than that of the polymer produced in the radical polyaddition with AIBN; whereas the molecular weight of the polymer from BDT and 4 was similar to that in the radical polyaddition, probably because of poor solubility of 4 and the polymer toward benzene. The geometrical structure of carbon–carbon double bonds in the polymer isomerized from an E to Z structure with reaction time by virtue of both the addition elimination of thiyl radical to the double bonds and the UV irradiation. © 1996 John Wiley & Sons, Inc.     

Diastereomeric Difference of the Self-Inclusion Complex of N(N′-Formyl-Phenylalanyl)-Deoxyamino-β-Cyclodextrin Caused by the Interaction between the Arm and the Rim of the Cavity

A complete assignment of proton resonances for N(N-formyl d-phenylalanyl)-deoxyamino--cyclodextrin (1d) was performed by means of 1D and 2D NMR,¹H–^1H-COSY, ¹H–^13C-COSY, TOCSYand NOESY spectroscopy. Based on 2D-NMR ROESY and circular dichroism spectroscopy, the conformation of 1d was determined; the phenyl group stays inside the distorted cyclodextrin (CyD) cavity forming a self-inclusion complex, which is almost the same as N(N-formyl l-phenylalanyl)-deoxyamino--CyD (1l). The remarkable diastereomeric difference was observed in the chemical shifts of H(5) and H(6) protons at the narrow rim of the CyD cavity and induced circular dichroism spectra. These results suggest the existence of hydrogen bonds between the hydroxyl group on CyD and the amide groups on the arms, which provides the difference in the molecular recognition properties.     

M?ssbauer spectroscopic study on valence-detrapping and trapping of mixed-valence trinuclear iron(III, III, II) fluorine-substituted benzoate complexes

Magnetorheological (MR) fluids are new iron-based materials, whose applications include brakes, dampers, clutches, shock absorbers systems and polishing of optical surfaces (lens and mirrors). They are dependent on the size and shape of particles as the magnetic properties. Interested in the possibility of using iron-rich powders, commonly used in nondestructive testing, ranging in size from a few μm to about 200?μm and lower cost than those commercially used for MR fluids, a study of the structural and magnetic properties of iron-rich metallic particles by X-ray diffraction (XRD) and M?ssbauer spectroscopy (MS) at room temperature has been done. Powders, as received, were separated into particle sizes smaller than 20?μm (sample A) and in the range of 20–38?μm (sample B) because these are the sizes generally required for applications in MR fluids. The particles whose sizes exceed the above values were ground in a high energy planetary mill for 3?h, using different values of rotational speed/time: 200?rpm for one hour, a pause of 10?s, 140?rpm for one hour, pause 10?s and then 175?rpm during the last hour. These powders were sieved to obtain particles smaller than 20?μm (sample C). According XRD results, in all samples, only α-Fe (lattice parameter a = 2,867(2) ?) and Fe₂O₃ (lattice parameter a = 5,037(1) ? and c = 13,755(8) ?) were present. The M?ssbauer spectra were fitted with two sextets. The hyperfine parameters values allowed us to assign the highest relative area spectrum (sextet) corresponding to α-Fe and the second one to Fe₂O₃ in accord to the XRD results. Thus, the preparation method using mechanical milling for diminishing the size of the metallic particles allowed us to get particles with size and magnetic properties that could lead to potentially MR fluids applications.     

Structure and mechanical properties of nylon 6.12 prepared by temperature slope crystallization. I. Crystallization of oriented spherulitic textures

Oriented spherulitic textures of a rod-shaped nylon 6.12 sample were crystallized by the temperature slope method. Crystallization conditions were compared by changing temperatures and growth rates. Three types of textures (negative spherulites, positive spherulites, and spherulitic aggregates) were observed by this method. The negative textures appeared when the growth rate was less than 0.1 mm/h. Crystalline orientation and mechanical properties of the textures were investigated by x-ray diffraction and micro-hardness measurements, respectively. The hydrogen-bonded (010) planes were perpendicular to the growth direction in the negative spherulite, while they were parallel to the growth direction in the positive spherulite. In the spherulitic aggregates, the b axis was parallel to the growth direction, while the (010) planes formed roughly an angle of 45° with the growth direction. Due to the orientation of the hydrogen-boned planes, the negative texture exhibited an anisotropy, with hardness values of 106 MPa and 137 Mpa when measured perpendicular or parallel to the growth direction, respectively.     

Photorefractive effect in the relaxor ferroelectric material 0.91Pb(Zn1/3Nb2/3)O3-0.09PbTiO3

The photorefractive effect in a nominally undoped 0.91Pb(Zn1/3Nb2/3)O3-0.09PbTiO3 single crystal is measured. We report what is, to our knowledge, the first observation of the photorefractive effect in Pb-based relaxor ferroelectric crystals. The crystal is grown by the flux solution method. Then it is cut into a 2 mm x 4 mm x 8 mm piece and electrically poled along the [111] direction. The coupling constant of the two-wave mixing is 17 cm(-1), and the normalized time constant under 1-W/cm(2) illumination is 12 s at a wave-length of 476 nm. The effective trap density is calculated as 5 x 10(16) cm(-3) from the Debye screening length under the assumption of Kukhtarev's band-transport model. The dominant carrier is identified to be holes from the direction of two-wave mixing energy transfer.     

Separation and purification of 99mTc from 99Mo produced by electron linear accelerator

The medical radionuclide ⁹⁹Mo was produced by the ¹⁰⁰Mo(γ,n) reaction using bremsstrahlung photons generated by an electron linear accelerator. The amount of ⁹⁹Mo produced was compared to that predicted by calculation using the particles and heavy ion transport code system. From the ⁹⁹Mo produced, highly pure ^99mTc was separated using the so-called technetium master milker, and the chemical yield of ^99mTc was 83–99 %. The installation of a new complex using this method and the electron linear accelerator with the preferable specification was suggested, and a possibility to supply the demand of ^99mTc was discussed and shown.

     

Synthesis of ZrO<Subscript>2</Subscript> nanoparticles for liquid scintillators used in the detection of neutrinoless double beta decay

We synthesized liquid scintillators incorporating ZrO₂ nanoparticles for application in neutrinoless double beta decay experiments. ZrO₂ nanoparticles of less than 10 nm in size were synthesized with sub- and supercritical hydrothermal methods. The Zr concentrations in the liquid scintillators were determined to be up to 1.4 wt% with inductively coupled plasma analysis, and the liquid scintillators were transparent to scintillation. These results indicate that these methods are applicable for the preparation of liquid scintillators for neutrinoless double beta decay experiments.     

Universal generation of higher-order multiringed Laguerre-Gaussian beams by using a spatial light modulator

Laguerre-Gaussian (LG) beams of various higher-order radial modes are generated by using a reflective phase-only liquid crystal on silicon (LCOS) spatial light modulator (SLM). Because of the LCOS SLM's phase-modulation characteristic of a wide spatial bandwidth, a phase modulation scheme effectively generates higher-order LG beams of up to the fifth-order radial mode. We also perform correlation analyses between the observed and the theoretical two-dimensional mode profiles to universally obtain correlation coefficients of more than 0.946, which suggest mode generations of high quality.     

Unequally spaced multiple mid-infrared wavelength generation using an engineered quasi-phase-matching device

We propose a novel quasi-phase-matched (QPM) device that can generate unequally spaced multiple wavelengths. Unequally spaced multiple QPM peaks can be obtained by employing the optimized phase modulation of a periodic domain structure. We fabricated a LiNbO3 waveguide device for 3.2-3.4 microm band difference frequency generation based on the design. Using the multiple mid-infrared outputs, we demonstrate the detection of multiple hydrocarbon gases, namely, methane, ethylene, and ethane.