New functional microspheres with active succinimide groups

Radiation-induced polymerization of monomers, for example N-methacryl-oxysuccinimide (MASu) and diethylene glycol dimethacrylate (2G), in ethyl propionate, was performed from +25°C to –78°C. The copoly (MASu/2G) microspheres were obtained in MASu monomer compositions of 30 wt % or below. The average particle diameter of copoly(MASu/2G, 20/80 wt %) microspheres obtained at irradiation temperatures of 25°, 0°, and –43 °C were 0.81±0.29, 0.63±0.26, and 0.90±0.43 m, respectively. No microspheres were formed when irradiated at –78 °C. The reactivity of the succinimide groups on the surface of copoly(MASu/2G, 20/80 wt%) microspheres was checked by reacting with ethylene diamine. The maximal amount of reacting succinimide groups was 9.4±0.5 nol/g, which corresponds to about 1 % of the total number of succinimide groups in the microsphere.     

Molecular structure of carbonyl bromide as studied by gas electron diffraction

The molecular structure of COBr₂ has been determined as follows by an analysis of electron diffraction intensity: r_g(CO) = 1.178 ± 0.009 Å, r_g(C-Br) = 1.923 ± 0.005 Å and θ°_α(Br-C-Br) = 112.3 ± 0.4°. The uncertainties represent estimated limits of error. The observed systematic trends in the bond lengths and bond angles in carbonyl and thiocarbonyl halides are discussed.     

PHOTOOXYGENATION OF METHYL LINOLEATE SENSITIZED BY PORPHYRINS AND DYES IN ACETONITRILE SOLUTION AND AQUEOUS EMULSION SYSTEMS

Photooxygenation reaction of an unsaturated fatty acid ester, methyl linoleate (methyl 9- cis. 12- cis -octadecadienoate, ML-H), sensitized by porphyrins and several types of dyes has been studied in aqueous emulsion and acetonitrile solution under air at 40°C. The oxygen (O₂) uptake proceeded slowly in the absence of sensitizers upon irradiation of an aqueous emulsion and an acetonitrile solution of ML-H (20 m M ) at ℷ_ex > 290 nm (11.4 and 6.1 μmol h^-1, respectively). The rate of O₂ uptake was enhanced by a catalytic amount (0.1 m M ) of porphyrins and dyes; hematoporphyrin (HP), zinc tetrakis(N-methyl-4-pyridiniumyi)porphyrin (ZnTMPyP), methylene blue (MB), rose bengal (RB), acridine orange (AO), and acriflavine (AF). In both systems, the sensitized photooxidation of ML-H by O₂ proceeded equimolarly to produce isomeric mixture of C9 and C13 hydroperoxides having the trans,cis and trans,trans conjugated diene configurations, independent of the types of the sensitizers used. The yield ratio of trans,trans/ trans,cis products in the MB-sensitized photooxygenation in acetonitrile and aqueous emulsion were almost equal (0.32 and 0.35. respectively). The sensitizing activity of the sensitizers, as measured by the quantum yield of O₂ uptake, increased in the order: MB (≃ 0) < ZnTMPyP < RB < HP < AF < AO in the aqueous emulsion and AO < AF < HP < RB = MB in the acetonitrile solution. The order in homogeneous acetonitrile solution was interpreted by the sensitizing ability of the dyes to produce singlet oxygen, while that in heterogeneous aqueous emulsion was correlated to the lipophilicity of dyes as well as the singlet-oxygen-producing ability.     

Retardation of discoloration of poly(vinyl chloride) and decolorization of discolored poly(vinyl chloride) with diimide

Retardation of discoloration of poly(vinyl chloride) with diimide was studied in dimethylformamide at 130°C. with the use of p-toluenesulfonylhydrazide (PSH) as a source of diimide. A process was proposed that involved prolonging the induction periods of discoloration by inhibiting the development of conjugated polyene structure. The optimum proportion of PSH was one fourth of the poly(vinyl chloride), the best results. Furthermore, poly(vinyl chloride) discolored by thermal degradation in o-dichlorobenzene or gamma-ray irradiation under vacuum was decolorized in solution at 130°C. by addition of PSH. The decolorized poly(vinyl chloride) thus obtained was thermally stable compared with that obtained by oxidative methods.     

Structural confirmation of oligosaccharides newly isolated from sugar beet molasses

ABSTRACT: BACKGROUND: Sugar beet molasses is a viscous by-product of the processing of sugar beets into sugar. The molasses is known to contain sucrose and raffinose, a typical trisaccharide, with a well-established structure. Although sugar beet molasses contains various other oligosaccharides as well, the structures of those oligosaccharides have not been examined in detail. The purpose of this study was isolation and structural confirmation of these other oligosaccharides found in sugar beet molasses. RESULTS: Four oligosaccharides were newly isolated from sugar beet molasses using high-performance liquid chromatography (HPLC) and carbon-Celite column chromatography. Structural confirmation of the saccharides was provided by methylation analysis, matrix-assisted laser desorption/ionaization time of flight mass spectrometry (MALDI-TOF-MS), and nuclear magnetic resonance (NMR) measurements. CONCLUSION: The following oligosaccharides were identified in sugar beet molasses: beta-D-galactopyranosyl-(1- > 6)-beta-D-fructofuranosyl-(2 <-> 1)-alpha-D-glucopyranoside (named beta-planteose), alpha-D-galactopyranosyl-(1- > 1)-beta-D-fructofuranosyl-(2 <-> 1)-alpha-D-glucopyranoside (named1-planteose), alpha-D-glucopyranosyl-(1- > 6)-alpha-D-glucopyranosyl-(1 <-> 2)-beta-D-fructofuranoside (theanderose), and beta-D-glucopyranosyl-(1- > 3)-alpha-D-glucopyranosyl-(1 <-> 2)-beta-D-fructofuranoside (laminaribiofructose). 1-planteose and laminaribiofructose were isolated from natural sources for the first time.     

Sequence-specific cleavage of RNA by designed ribozymes

Abstract

Ribozymes that distinguish a single base change in RNA were synthesized and used to specifically cleave c-Ha-ras messenger RNA. Using phosphorothioate containing oligonucleotide substrates, we have shown that Mg²⁺ binds to the pro-R oxygen of the phosphate and that the RNA cleavage reaction occurs via an in-line mechanism. Oligoribonucleotides containing a modified nucleoside are described.     

Synthesis of ZrO<Subscript>2</Subscript> nanoparticles for liquid scintillators used in the detection of neutrinoless double beta decay

We synthesized liquid scintillators incorporating ZrO₂ nanoparticles for application in neutrinoless double beta decay experiments. ZrO₂ nanoparticles of less than 10 nm in size were synthesized with sub- and supercritical hydrothermal methods. The Zr concentrations in the liquid scintillators were determined to be up to 1.4 wt% with inductively coupled plasma analysis, and the liquid scintillators were transparent to scintillation. These results indicate that these methods are applicable for the preparation of liquid scintillators for neutrinoless double beta decay experiments.     

Three‐arm star block copolymers of aromatic polyether and polystyrene from chain‐growth condensation polymerization,atom transfer radical polymerization,and click reaction

Well‐defined (AB)₃ type star block copolymer consisting of aromatic polyether arms as the A segment and polystyrene (PSt) arms as the B segment was prepared using atom transfer radical polymerization (ATRP), chain‐growth condensation polymerization (CGCP), and click reaction. ATRP of styrene was carried out in the presence of 2,4,6‐tris(bromomethyl)mesitylene as a trifunctional initiator, and then the terminal bromines of the polymer were transformed to azide groups with NaN₃. The azide groups were converted to 4‐fluorobenzophenone moieties as CGCP initiator units by click reaction. However, when CGCP was attempted, a small amount of unreacted initiator units remained. Therefore, the azide‐terminated PSt was then used for click reaction with alkyne‐terminated aromatic polyether, obtained by CGCP with an initiator bearing an acetylene unit. Excess alkyne‐terminated aromatic polyether was removed from the crude product by means of preparative high performance liquid chromatography (HPLC) to yield the (AB)₃ type star block copolymer (M_n = 9910, M_w/M_n = 1.10). This star block copolymer, which contains aromatic polyether segments with low solubility in the shell unit, exhibited lower solubility than A₂B or AB₂ type miktoarm star copolymers. In addition, the obtained star block copolymer self‐assembled to form spherical aggregates in solution and plate‐like structures in film. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012