Drying dissipative patterns of colloidal crystals of silica spheres in organic solvents

Drying dissipative structural patterns formed in the course of drying colloidal crystals of silica spheres (110 nm in diameter) in water, methyl alcohol, ethyl alcohol, 1-propyl alcohol, diethyl ether, and in the mixtures of ethyl alcohol with the other solvents above have been studied on a cover glass. The macroscopic broad rings were formed in the outside edges of the dried film for all the solvents examined. Furthermore, much distinct broad rings appeared in the inner area when the solvents were ethyl alcohol, methyl alcohol, and their mixtures. Profiles of the thickness of the dried films were sensitive to the organic solvents and explained well with changes in the surface tensions, boiling points, and viscosities of the solvents. The macroscopic and microscopic spoke-like crack patterns formed. The drying area (or the drying time) increased (or decreased) as the surface tension of the solvent decreased. However, the absolute values of these drying parameters are determined also by the boiling points of the solvents. Importance of the fundamental properties of the solvents is supported in addition to the characteristics of colloidal particles in the drying dissipative pattern formation.     

Production of micron-sized monodispersed composite polymer particles by seeded polymerization utilizing the dynamic swelling method

 In order to develop the seeded polymerization technique utilizing the dynamic swelling method (DSM) proposed by authors for the production of micron-sized mono-dispersed “composite” polymer particles consisting of two kinds of polymers, the seeded polymerization for the dispersion of ethyl methacry-late (EMA)-swollen PS particles prepared utilizing DSM was carried out. Monodispersed PS/poly(ethyl methacrylate) (PEMA) composite particles having 7 μm in diameter were produced by the addition of NaCl to lower the solubility of EMA in medium and by the addition of CuCl₂ as a water-soluble inhibitor to depress the by-production of submicron-sized PEMA particles. Received: 16 July 1996 Accepted: 10 October 1996     

Synthesis of temperature-sensitive micron-sized monodispersed composite polymer particles and its application as a carrier for biomolecules

 Temperature-sensitive micron-sized monodispersed composite polymer particles were prepared by seeded copolymerization of dimethylaminoethyl methacrylate and ethylene glycol dimethacrylate with 1.77 μm-sized monodispersed polystyrene seed particles. The change in surface property at temperature above and below 35 °C was examined by differential scanning calorimetry, trypsin activity and the adsorption/ desorption behaviors of low molecular weight cationic emulsifier as well as biomolecules. Received: 6 August 1997 Accepted: 16 January 1998     

Photocrosslinkable polyesters with conjugated double bonds: Reciprocity effect in laser recording

The reciprocity effect under intense illumination was studied with photocrosslinkable polyesters of p-phenylenebis(α-cyanobutadiene carboxylic acid) (I), m-phenylenebis(α-cyanobutadiene carboxylic acid) (II), and p-phenylenebis(acrylic acid) (III), with an argon ion laser as a light source. The reciprocal sensitivities of I, II, and III were 5.0, 1800, and > 10⁵ mJ/cm², respectively. II and III required sensitization to enhance their sensitivities to a level at which reciprocity effects could be measured. I obeyed the reciprocity law over a wide range of exposure times from seconds to microseconds. Both II′, a copolyester of II, and III showed a dramatic decrease of sensitivity in high-intensity/short-time exposure when sensitized by 9,10-phenanthraquinone and pyrylium salts.     

Thermodynamic study of niobium oxides with ONb ratios from 2.47 to 2.50 using a high-temperature galvanic cell

The partial molar free energy, enthalpy, and entropy of oxygen in niobium oxides with $\text{O}\text{Nb}$ ratios from 2.47 to 2.50 were measured with a galvanic cell in the temperature range from 1084 to 1325 K. The partial molar enthalpies of oxygen of the Nb₂O_5?x and V phases were observed to be nearly independent of composition, indicating the presence of only weak interactions between defects. The value of the slope for the plots of log x in Nb₂O_5?x against log P_O2 was observed to be $\text{?1}\text{5.2}$ which is interpreted in terms of a defect structure involving both singly ionized and doubly ionized oxygen vacancies. The previously proposed phase diagram in the vicinity of Nb₂O_5?x was confirmed by the present emf measurements.     

Incorporation of CdS Nanoparticles Formed in Reverse Micelles into Mesoporous Silica

The incorporation of CdS nanoparticles, prepared in reverse micellar systems, into thiol-modified mesoporous silica, such as FM41 (functionalized MCM-41) and FM48 (functionalized MCM-48), has been investigated. The nanoparticles were immobilized in the mesopores via the incorporation of water droplets of the reverse micelles. A particle-sieving effect for FM41 having large (L-FM41, 3.8 nm) and medium (M-FM41, 3.6 nm) pore size was observed, in that the incorporation of the CdS nanoparticles was decreased with increasing particle size and with decreasing pore size of the FM41. Chemical vapor deposition treatment employed to narrow the mesopores of the CdS-FM41 enhanced the stability of CdS nanoparticles against heat treatment. The CdS-FM41 composites demonstrated photocatalytic activity for H(2) generation from 2-propanol aqueous solution, the better photocatalytic activity being obtained with the larger pore size for CdS-L-FM41. Copyright 2001 Academic Press.     

Production of submicron-sized multihollow polymer particles by alkali/cooling method

Submicron-sized styrene-methacrylic acid copolymer particles, which were produced by emulsion copolymerization, were changed to those having multihollow structure by treating stepwise the emulsion as follows. First alkali treatment was carried out at higher temperature than the glass transition temperature and subsequently the emulsion was cooled by keeping it at room temperature. This was named alkali/cooling method. The effects of methacrylic acid content, pH, time and temperature in the alkali treatment on the formation of multihollow structure were clarified.Part CLV of the series Studies on suspension and emulsion     

Catalytic transformation of methane over in-loaded ZSM-5 zeolite in the presence of ethene

Methane is shown to react with ethene over In-loaded ZSM-5 to higher hydrocarbons such as propene and toluene at around 673 K. Such methane conversion is not catalyzed by proton-exchanged ZSM-5 (H-ZSM-5) under the same conditions, only C2H4 being converted to higher hydrocarbons. By using 13C-labeled methane (13CH4) as a reactant, the reaction paths for the formation of propene, benzene and toluene were examined. 13C-labeled propene (13CC2H6) is formed by the reaction of 13CH4 with C2H4. The lack of 13C-labeled benzene revealed that propene is not transformed to benzene, which instead originates entirely from C2H4. The 13C atom is inserted both into the methyl group and benzene ring in the toluene formed. This indicates that toluene is formed by two reaction paths; the reaction of 13CC2H6 with butenes formed by the dimerization of C2H4 and the reaction of benzene with 13CH4. The existence of the latter path was proved by the direct reaction of 13CH4 with benzene. The reaction of methane with benzene was also carried out in a continuous flow system over In-loaded ZSM-5. The reaction afforded 7.6% and 0.9% yields of toluene and xylenes, respectively, at 623 K.     

Synthesis of benzimidazole derivatives as potential H1-antihistaminic agents

Several types of benzimidazole derivatives were prepared and were screened for H ₁-antihistaminic activity. Most of the compounds showed potent antihistaminic activity in vitro. Among them 2-[(1-piperazinyl)methyl]-benzimidazoles 14 and 2-[(1-homopiperazinyi)methyl]benzimidazoles 15 exhibited potent activity also in vivo.