Regioselective allylation reactions using crotyl Grignard reagent-CeCl3 systems

Regioselective allylation reactions using crotyl Grignard reagent-CeCl₃ systems are described. Regioselectivity depends on the lanthanide salts: α-product was predominantly produced with light rare earth elements such as La, Ce, Pr, Nd, whereas γ-product was formed when heavy rare earth elements were used.     

Observation on meta-stability of thulium nitrate crystal by using electric measurements

Frequency dependence of ac conductivity from 1 to 10⁵ Hz and time series of the conductivity at 2 kHz were measured along c-axis of thulium nitrate crystal, Tm(NO₃)₃6H₂O at temperatures from 203.15 to 293.15 K. The meta-stability was observed. The frequency spectra of the conductivity were similar to those in disorder system. Aging effect was observed. Non-periodic instability (burst) was found. Non-linear dynamical property was characterized by 1/f noise spectrum, limit cycle in return map and dependence of correlation exponent on embedding dimension.     

Dihydroboronium derivatives of (S,S)-1,2-bis(t-butylmethylphosphino)ethane as convenient chiral ligand precursors

Dihydroboronium derivatives of (S,S)-1,2-bis(t-butylmethylphosphino)ethane (t-Bu-BisP*) were prepared and used as chiral diphosphine ligand precursors in Rh-catalyzed asymmetric hydrogenation of methyl (Z)-acetamidocinnamate to afford the hydrogenation product in up to 94% enantioselectivity.     

Ultrafast Encapsulation of Metal Nanoclusters into MFI Zeolite in the Course of Its Crystallization: Catalytic Application for Propane Dehydrogenation

Encapsulating metal nanoclusters into zeolites combines the superior catalytic activity of the nanoclusters with high stability and unique shape selectivity of the crystalline microporous materials. The preparation of such bifunctional catalysts, however, is often restricted by the mismatching in time scale between the fast formation of nanoclusters and the slow crystallization of zeolites. We herein demonstrate a novel strategy to overcome the mismatching issue, in which the crystallization of zeolites is expedited so as to synchronize it with the rapid formation of nanoclusters. The concept was demonstrated by confining Pt and Sn nanoclusters into a ZSM-5 (MFI) zeolite in the course of its crystallization, leading to an ultrafast, in situ encapsulation within just 5 min. The Pt/Sn-ZSM-5 exhibited exceptional activity and selectivity with stability in the dehydrogenation of propane to propene. This method of ultrafast encapsulation opens up a new avenue for designing and synthesizing composite zeolitic materials with structural and compositional complexity.     

Zinc chelation and photofluorochromic behavior of spironaphthoxazine intercalated into hydrophobically modified montmorillonite

Spironaphthoxazine (SNO) and Zn2+ were intercalated into montmorillonite interlayers hydrophobically modified by the alkyltrimethylammonium cation during UV light irradiation. The fluorescence spectra of the montmorillonite composites were observed to vary with an increase in the UV and visible light irradiation times. These composites exhibited two types of fluorescence emissions: F1, which originates from a new species, Xs, which is different from SNO (ring-closed form) and merocyanine (MC; ring-open form), and F2, which originates from the MC-Zn complex. With increasing UV light irradiation time, the F1 intensities decreased, whereas the F2 intensities increased. Xs, which is an intermediate species between SNO and MC, was transformed into MC and then coordinated with Zn2+ (i.e., MC-Zn complex) during the UV light irradiation. The reaction rate of the formation of the MC-Zn complex decreased for the hydrophobically modified montmorillonite due to a longer alkyl chain. The retrieval changes in the F1 and F2 intensities were observed with an increasing visible light irradiation time, implying the dissociation of the MC-Zn complex into Xs and Zn2+. The dissociation especially occurred for the hydrophobically modified montmorillonite with a longer alkyl chain. The formation and disappearance of Xs and the MC-Zn complex obeyed first-order kinetics, and therefore the interconversion between Xs and MC could be regarded as the rate-determining step of the whole reaction during the UV and visible light irradiations. The photoinduced reactions of the SNO species and Zn2+ were profoundly affected by the physicochemical environment provided by the clay interlayers. It is concluded that the present photoreactions can be controlled not only by the amounts of the intercalated SNO species and Zn2+, but also by the hydrophobic environment created by the surfactant molecules.     

Synthesis and structure of 8-hydroxy-6-methoxy-3,7-dimethylisochromane and its analogues

The title compound 1 was obtained by the reaction of alcohol 18 and triethyl orthoformate catalyzed by aluminum chloride followed by catalytic hydrogenation in good yield. Similarly, compounds 1 and 3 were obtained by intramolecular cyclization of MOM ether 19 with titanium(IV) chloride in moderate yields and isochromanes 1, 3, 26 and 27 by intramolecular cyclization of ether 20 with titanium(IV) chloride in high yields. The structures of compounds 1-3 were elucidated by analysis of spectroscopic data and chemical reactions. The mechanisms on the formation of 1 and 3 are discussed.     

Dissipative crystallization of aqueous mixtures of potassium salts of poly(riboguanylic acid) and poly(ribocytidylic acid)

Drying patterns of aqueous solutions of potassium salts of poly(riboguanylic acid) (KPolyG), poly(ribocytidylic acid) (KPolyC), and their mixtures KPolyG + KPolyC were studied on a cover glass, a watch glass, and a glass dish at room temperature. Accumulation of the polymers forming the broad rings near the outside edge and also in the inner area of the dried film was observed. The fine multiple ring structures formed, which supports the fact that the affinity of the polymer with the substrate is strong. Typical microscopic drying patterns of KPolyG, KPolyC, and KPolyG + KPolyC were spherulites, dendritic long rods, and sword (harberd)-like rods, respectively. The patterns changed depending on the location in the dried film. The dendritic long rods and sword-like rods were assigned to the crystals of double-stranded and/or triple-stranded helices of the G:C and 2G:C complexes. Cross-like drying patterns that originated from the salt-polymer interaction are also observed. The relationship between the polymer complexation of KPolyG + KPolyC systems and the drying patterns is similar to that of KPolyA (potassium salt of poly(adenylic acid)) + KPolyU (potassium salt of poly(uridylic acid)).     

Cationic gel crystals and amorphous solids of lightly cross-linked poly(2-vinylpyridine) spheres in the deionized aqueous suspension

Colloidal crystallization and amorphous solidification of deionized suspensions of the polydispersed cationic gel spheres of lightly cross-linked poly(2-vinylpyridine), CAIBA-P2VP (107～113 nm in diameter, ±19～22 nm in dispersity), have been studied from the reflection spectroscopy, morphology, phase diagram, and elastic property. Crystallization takes place even for the polydispersed cationic gel spheres by the significant contribution of the extended electrical double layers formed around the spheres. Critical concentrations of melting coexisted with ion exchange resins were around 0.02 in volume fraction and high compared with those of other cationic and anionic gel crystals examined hitherto. The densities (ρ) of CAIBA-P2VP in suspension state, i.e., weight percent of the gel spheres divided by the corresponding volume percent, was around 0.3. The ρ values decreased sharply with decreasing size of P2VP gel spheres, which supports the small gel spheres containing much water inside and being softer than the large ones. The closest intersphere distances of the crystals and/or amorphous solids were much longer than the hydrodynamic diameters of the gel spheres especially at low sphere concentrations. Fluctuation parameters (b) evaluated from the rigidities of CAIBA-P2VP (0.15～0.28) were large compared with those of gel crystals of large-sized P2VP-based cationic gel spheres, anionic thermosensitive gel spheres of poly(N-isopropylacrylamide) (0.05～0.09) and further much larger than those of typical colloidal hard spheres (around 0.03). The dispersity in sphere size played an important role for distinguishing crystal and amorphous solid. Importance of the extended electrical double layers around the cationic gel spheres is supported in addition to the excluded volume effect of the sphere themselves on the crystallization and/or solidification.     

Influences of Acid on Molecular Forms of Fluorescein and Photoinduced Electron Transfer in Fluorescein‐Dispersing Sol–Gel Titania Films

Fluorescein‐dispersing titania gel films were prepared by the acid‐catalyzed sol–gel reaction using a titanium alkoxide solution containing fluorescein. The molecular forms of fluorescein in the films, depending on its acid–base equilibria, and the complex formation and photoinduced electron transfer process between the dye and titania surface were investigated by fluorescence and photoelectric measurements. The titanium species were coordinated to the carboxylate and phenolate‐like groups of the fluorescein species. The quantum efficiencies of the fluorescence quenching and photoelectric conversion were higher upon excitation of the dianion species interacting with the titania, i.e. the dye–titania complex. This result indicated that the dianion form was the most favorable for formation of the dye–titania complex exhibiting the highest electron transfer efficiency. Using nitric acid as the catalyst, the titania surface bonded to the fluorescein instead of the adsorbed nitrate ion during the steam treatment. The dye–titania complex formation played an important role in the electron injection from the dye to the titania conduction band.     

Determination of plutonium isotopes in marine particles collected by the large volume in situ filtration and concentration system

An analytical method for the determination of ²³⁹Pu and ²⁴⁰Pu in marine particle samples by sector field high-resolution ICP-MS was developed. The method was applied for large and small particle samples (particle diameter: >70 μm and 1–70 μm, respectively, collected with a large volume in situ filtration and concentration system at different depths in the water column off Rokkaho, Japan, where the spent nuclear fuel reprocessing plant of Japan Nuclear Fuel Ltd. has started test operation since March 2006.