Photocrosslinkable polyesters with conjugated double bonds: Reciprocity effect in laser recording

The reciprocity effect under intense illumination was studied with photocrosslinkable polyesters of p-phenylenebis(α-cyanobutadiene carboxylic acid) (I), m-phenylenebis(α-cyanobutadiene carboxylic acid) (II), and p-phenylenebis(acrylic acid) (III), with an argon ion laser as a light source. The reciprocal sensitivities of I, II, and III were 5.0, 1800, and > 10⁵ mJ/cm², respectively. II and III required sensitization to enhance their sensitivities to a level at which reciprocity effects could be measured. I obeyed the reciprocity law over a wide range of exposure times from seconds to microseconds. Both II′, a copolyester of II, and III showed a dramatic decrease of sensitivity in high-intensity/short-time exposure when sensitized by 9,10-phenanthraquinone and pyrylium salts.     

Thermodynamic study of niobium oxides with ONb ratios from 2.47 to 2.50 using a high-temperature galvanic cell

The partial molar free energy, enthalpy, and entropy of oxygen in niobium oxides with $\text{O}\text{Nb}$ ratios from 2.47 to 2.50 were measured with a galvanic cell in the temperature range from 1084 to 1325 K. The partial molar enthalpies of oxygen of the Nb₂O_5?x and V phases were observed to be nearly independent of composition, indicating the presence of only weak interactions between defects. The value of the slope for the plots of log x in Nb₂O_5?x against log P_O2 was observed to be $\text{?1}\text{5.2}$ which is interpreted in terms of a defect structure involving both singly ionized and doubly ionized oxygen vacancies. The previously proposed phase diagram in the vicinity of Nb₂O_5?x was confirmed by the present emf measurements.     

A High Sensitivity Fluorescent Chemo-sensory System Based on β-Cyclodextrin Dimer Modified with Dansyl Moieties

-Cyclodextrin dimer linked with ethylenediamine at the upper rim of the cyclodextrin has been synthesized and then modified with two dansyl moieties inthe presence of N,N'-dicyclohexylcarbodiimide. The sensing ability and bindingproperty of the title compound were investigated for steroids and terpenoids. Thefluorescence intensity of this dimer was decreased when a host–guest complex was formed. The value I/I⁰, where I⁰ and I are fluorescence intensitiesin the absence and presence of a guest and I is I⁰- I, was used as a parameter of sensitivity. This host exhibited a much higher sensitivity and selective molecular recognition ability for bile acids such as ursodeoxycholic acid andchenodeoxycholic acid and terpenoids such as (-)-borneol than the dansyl-modifiedcyclodextrins reported previously including -cyclodextrin dimer. The behaviors of the appended moieties of the host during the formation of host–guest complexes were studied using induced circular dichroism (ICD) and fluorescence spectra. The ICD intensityof this dimer was decreased on accommodation of a guest and this spectral pattern of the title dimer was opposite to that of bis dansyl-modified -cyclodextrin monomer. Theguest-induced variations in the fluorescence and ICD intensities suggest that this dimer formed a 1 : 1 host–guest complex and the appended moieties act as a hydrophobic cap.     

Facile radical trifluoromethylation of lithium enolates

[reaction: see text] Highly basic lithium enolates are shown to be applicable to radical trifluoromethylation. The reaction is extremely fast, and the minimum reaction time is approximately 1 s.     

Crystal structures and topochemical polymerizations of 7,7,8,8-tetrakis(alkoxycarbonyl)quinodimethanes

Highly conjugated monomers, 7,7,8,8-tetrakis(alkoxycarbonyl)quinodimethanes (methoxy (1a), ethoxy (1b), isopropoxy (1c), benzyloxy (1d), chloroethoxy (1e), and bromoethoxy (1f)), were synthesized. Recrystallizations of 1a, 1c, 1e, and 1f yielded two crystal forms (prisms (1a-A) and needles (1a-B), needles (1c-A) and plates (1c-B), prisms (1e-A) and plates (1e-B), and prisms (1f-A) and needles (1f-B)), which have different molecular packing modes by X-ray crystal structure analysis, indicating that the crystals are polymorphic. In the photopolymerizations of these monomer crystals in the solid state, 1a-A, 1e-A, and 1f-A polymerized topochemically to give crystalline polymers. For their thermal polymerizations in the solid state, in addition to 1a-A, 1e-A, and 1f-A, 1e-B and 1f-B polymerized, but polymers formed from the 1e-B and 1f-B were amorphous. The packing of quinodimethane molecules in the crystals was defined by four kinds of parameters, stacking distance (d(s)), the distance between the reacting exomethylene carbon atoms (d(cc)), the angles formed between the stacking axis and longer axis of the monomer molecule (theta(1)), and the shorter axis of the monomer molecule (theta(2)), and then the polymerization reactivity of these quinodimethanes in the solid state was discussed on the basis of these parameters.     

Catalytic transformation of methane over in-loaded ZSM-5 zeolite in the presence of ethene

Methane is shown to react with ethene over In-loaded ZSM-5 to higher hydrocarbons such as propene and toluene at around 673 K. Such methane conversion is not catalyzed by proton-exchanged ZSM-5 (H-ZSM-5) under the same conditions, only C2H4 being converted to higher hydrocarbons. By using 13C-labeled methane (13CH4) as a reactant, the reaction paths for the formation of propene, benzene and toluene were examined. 13C-labeled propene (13CC2H6) is formed by the reaction of 13CH4 with C2H4. The lack of 13C-labeled benzene revealed that propene is not transformed to benzene, which instead originates entirely from C2H4. The 13C atom is inserted both into the methyl group and benzene ring in the toluene formed. This indicates that toluene is formed by two reaction paths; the reaction of 13CC2H6 with butenes formed by the dimerization of C2H4 and the reaction of benzene with 13CH4. The existence of the latter path was proved by the direct reaction of 13CH4 with benzene. The reaction of methane with benzene was also carried out in a continuous flow system over In-loaded ZSM-5. The reaction afforded 7.6% and 0.9% yields of toluene and xylenes, respectively, at 623 K.     

Synthesis of benzimidazole derivatives as potential H1-antihistaminic agents

Several types of benzimidazole derivatives were prepared and were screened for H ₁-antihistaminic activity. Most of the compounds showed potent antihistaminic activity in vitro. Among them 2-[(1-piperazinyl)methyl]-benzimidazoles 14 and 2-[(1-homopiperazinyi)methyl]benzimidazoles 15 exhibited potent activity also in vivo.     

Structure and dioxygen-reactivity of copper(I) complexes supported by bis(6-methylpyridin-2-ylmethyl)amine tridentate ligands

The structure and dioxygen-reactivity of copper(I) complexes R supported by N,N-bis(6-methylpyridin-2-ylmethyl)amine tridentate ligands L2R[R (N-alkyl substituent)=-CH2Ph (Bn), -CH2CH2Ph (Phe) and -CH2CHPh2(PhePh)] have been examined and compared with those of copper(I) complex (Phe) of N,N-bis[2-(pyridin-2-yl)ethyl]amine tridentate ligand L1(Phe) and copper(I) complex (Phe) of N,N-bis(pyridin-2-ylmethyl)amine tridentate ligand L3(Phe). Copper(I) complexes (Phe) and (PhePh) exhibited a distorted trigonal pyramidal structure involving a d-pi interaction with an eta1-binding mode between the metal ion and one of the ortho-carbon atoms of the phenyl group of the N-alkyl substituent [-CH2CH2Ph (Phe) and -CH2CHPh2(PhePh)]. The strength of the d-pi interaction in (Phe) and (PhePh) was weaker than that of the d-pi interaction with an eta2-binding mode in (Phe) but stronger than that of the eta1 d-pi interaction in (Phe). Existence of a weak d-pi interaction in (Bn) in solution was also explored, but its binding mode was not clear. Redox potentials of the copper(I) complexes (E1/2) were also affected by the supporting ligand; the order of E1/2 was Phe>R>Phe. Thus, the order of electron-donor ability of the ligand is L1Phe相似文献   

Synthesis of carbazole,acridine, phenazine, 4H‐benzo[def]carbazole and their derivatives by thermal cyclization reaction of aromatic amines

A variety of nitrogen‐containing heterocycles were synthesized by passing vapors of aromatic amines over calcium oxide at 450–650 °C under nitrogen carrier gas. Reaction of 2‐aminobiphenyl 3a at 560 °C gave carbazole 4 in 80% yield. Reaction of 2, 2′‐diaminobiphenyl 3b afforded a mixture of carbazole 4 and 4‐aminocarbozole 6b. In the case of 2‐amino‐2′‐nitrobiphenyl 3c, benzo[c]cinnoline 7 was obtained along with carbazole 4. Reaction of 2‐amino‐2′‐methoxybiphenyl 3d gave four products of carbazole 4,4‐hydroxycarbazole 6e, phenanthridine 8 and dibenzofuran 9. Reaction of 2‐aminodiphenylmethane 5a afforded acridine 10. In the case of 2‐aminobenzophenone 5b, acridone 11 was obtained as a major product. Reaction of 2‐aminobenzhydrol 5c gave acridine 10. When 2‐aminodiphenylamine 5d was reacted, phenazine 12 was obtained in good yield. In contrast, reaction of 2‐aminodiphenyl ether 5e produced only 2‐hydroxydiphenylamine 13. Reaction of 4‐aminophenanthrene 14 produced 4H‐benzo[def]carbazole 15 in 61% yield.     

Synthesis and property of soluble poly(1,1′-dialkyl-3,3′-ferrocenylenevinylene)s via titanium-induced dicarbonyl-coupling reaction of 1,1′-dialkylferrocene-3,3′-dicarbaldehydes

1,1′-Dialkylferrocene-3,3′-dicarbaldehydes ( 1a–c ) with long alkyl chains such as ethyl, hexyl, and dodecyl groups were prepared in 13–25% yield via three-step reactions. The titanium-induced dicarbonyl-coupling reaction of 1a–c gave poly(1,1′-dialkyl-3,3′-ferrocenylenevi-nylene)s ( 2a–c ) in quantitative yields, which were the molecular weights of 3000–10,000 and highly soluble in chloroform, benzene, and hexane. The electrical conductivity and the third-order nonlinear optical susceptibility for poly(1,1′-dihexyl-3,3′-ferrocenylenevinylene) ( 2b ) were estimated to be 1 × 10^?2 S/cm on doping with iodine and 1–4 × 10^?12 esu at a wavelength of 1–2.4 μm, respectively. © 1995 John Wiley & Sons, Inc.