Synthesis and properties of polyimide-clay hybrid films

Polyimide-clay hybrid films with four different sizes of clay minerals have been synthesized to investigate the effect of the size of clay minerals to the properties of the hybrids. Hectrite, saponite, montmorillonite, and synthetic mica were used as clay minerals. Those clays consist of stacked silicate sheets about 460 Å (hectrite), 1650 Å (saponite), 2180 Å (montmorillonite), and 12300 Å (synthetic mica) in length, 10 Å in thickness. The longer the length of clay mineral was, the more effectively properties of polyimide were improved. In the case of polyimide-mica hybrid, only 2 wt % addition of synthetic mica brought permeability coefficients of water vapor to value less than one-tenth of that of ordinary unfilled polyimide, and thermal expansion coefficient was lowered at the level of 60% of the original one. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2289–2294, 1997     

Multiple cluster model (MCM) for surface reaction systems

Multiple cluster model (MCM) for investigating surface reactions is formulated. In this model the reaction center, where electron correlation effects often play a key role, is described by an accurate high‐level approximation, and bulk effects such as the lattice distortion energy are evaluated using a simple low‐level approximation. Therefore, the MCM can properly simulate the potential energy hypersurface of the surface reaction system with a feasible computational cost. Since there exists no fixed atom in the MCM, we can rigorously characterize the stationary point (the minimum energy point or the transition state) on the potential energy hypersurface by vibrational frequency analysis. The MCM can be applied not only to surface systems, but also to various large systems. A detailed comparison of the MCM with the integrated molecular orbital+molecular mechanics (IMOMM), the integrated molecular orbital+molecular orbital (IMOMO), and ONIOM developed by Morokuma and co‐workers is also presented. ©1999 John Wiley & Sons, Inc. Int J Quant Chem 71: 403–413, 1999     

Mechanistic study of the electrodeposition of nanoporous self-assembled ZnO/Eosin Y hybrid thin films: effect of eosin concentration

ZnO films prepared by one-step electrodeposition in the presence of dissolved eosin molecules present an internal nanoporous hybrid structure resulting from self-assembling processes occurring in solution between ZnO and eosin components. This study aims to better understand the underlying growth mechanism, which is still unexplained. The films were deposited by cathodic electrodeposition from an oxygen-saturated aqueous zinc chloride solution. The effects of the addition of 10 to 100 micromol.L(-1) eosin Y, as a sodium salt, on the growth rate and film properties, were systematically studied while all other parameters remained constant (concentrations of zinc salt and supporting electrolyte, applied potential of -1.4 V versus the mercurous sulfate electrode (MSE), temperature of 70 degrees C, rotating disk electrode at 300 rotations per min, and a glass-coated tin oxide electrode). It is shown that the addition of eosin provokes the formation of a nanoporous "cauliflower" structure whose nodule size and composition depend on the eosin concentration in the bath. The growth rate of the hybrid films increases markedly with the eosin concentration. The ZnO and eosin contents of the films are determined for each concentration by chemical analysis. Comparing with thickness determinations, it is shown that the total porosity increases up to 60-65% in volume fraction toward an eosin concentration of 100 micromol.L(-1). The empty pore volume fraction increases up to about 30% at an eosin concentration of about 20 micromol.L(-1) and then decreases. These correlations have been precisely established for the first time. It is shown that the global composition is fixed by the relative rate of deposition for zinc oxide, which is constant, and for the relative rate of eosin inclusion, which is proportional to the concentration in solution. This is explained on the basis of different steps in the growth mechanism, in particular, a diffusion effect limitation for both oxygen and eosin. This variation explains part of the increase in the growth rate. Another contribution is related by the structural effect on the nanoscale leading to the formation of the interpenetrated porous network. Competition between empty and eosin-filled parts of the pore network is evidenced. The formation of the porous network structure could be governed by a diffusion-limited aggregation mechanism. The system may represent a reference case of competing reactions in the electrochemical self-assembly of hybrid nanostructures.     

Comparison of accuracy of intravoxel incoherent motion and apparent diffusion coefficient techniques for predicting malignancy of head and neck tumors using half-Fourier single-shot turbo spin-echo diffusion-weighted imaging

Purpose

To evaluate the use of the intravoxel incoherent motion (IVIM) technique in half-Fourier single-shot turbo spin-echo (HASTE) diffusion-weighted imaging (DWI), and to compare its accuracy to that of apparent diffusion coefficient (ADC) to predict malignancy in head and neck tumors.

Patients and methods

HASTE DW images of 33 patients with head and neck tumors (10 benign and 23 malignant) were evaluated. Using the IVIM technique, parameters (D, true diffusion coefficient; f, perfusion fraction; D*, pseudodiffusion coefficient) were calculated for each tumor. ADC values were measured over a range of b values from 0 to 1000 s/mm². IVIM parameters and ADC values in benign and malignant tumors were compared using Student's t test, receiver operating characteristics (ROC) analysis, and multivariate logistic regression modeling.

Results

Mean ADC and D values of malignant tumors were significantly lower than those of benign tumors (P < 0.05). Mean D* values of malignant tumors were significantly higher than those of benign tumors (P < 0.05). There was no significant difference in mean f values between malignant and benign tumors (P > 0.05). The technique of combining D and D* was the best for predicting malignancy; accuracy for this model was higher than that for ADC.

Conclusions

The IVIM technique may be applied in HASTE DWI as a diagnostic tool to predict malignancy in head and neck masses. The use of D and D* in combination increases the diagnostic accuracy in comparison with ADC.     

Total synthesis of COPD biomarker desmosine that crosslinks elastin

Desmosine, a crosslinking amino acid of elastin, is an attractive biomarker for diagnosis of chronic obstructive pulmonary disease (COPD). In this study, the first total synthesis of (+)-desmosine was achieved in 11% overall yield in 13 steps utilizing stepwise and regioselective Sonogashira cross-coupling reactions.     

Concise synthesis and anti-HIV activity of pyrimido[1,2-c][1,3]benzothiazin-6-imines and related tricyclic heterocycles

3,4-Dihydro-2H,6H-pyrimido[1,2-c][1,3]benzothiazin-6-imine (PD 404182) is a virucidal heterocyclic compound active against various viruses, including HCV, HIV, and simian immunodeficiency virus. Using facile synthetic approaches that we developed for the synthesis of pyrimido[1,2-c][1,3]benzothiazin-6-imines and related tricyclic derivatives, the parallel structural optimizations of the central 1,3-thiazin-2-imine core, the benzene part, and the cyclic amidine part of PD 404182 were investigated. Replacement of the 6-6-6 pyrimido[1,2-c][1,3]benzothiazin-6-imine framework with 5-6-6 or 6-6-5 derivatives led to a significant loss of anti-HIV activity, and introduction of a hydrophobic group at the 9- or 10-positions improved the potency. In addition, we demonstrated that the PD 404182 derivative exerts anti-HIV effects at an early stage of viral infection.     

Titanium complexes supported by an [OSSO]-type bis(phenolato) ligand based on a trans-cyclooctanediyl platform: synthesis, structures, and 1-hexene polymerization

trans-Cyclooctanediyl-bridged [OSSO]-type ligand 4 reacts with TiCl(4)(thf)(2) in toluene to produce the corresponding titanium(IV) dichloro complexes as an inseparable mixture of cis-α isomer 6a and cis-β isomer 6b in a ratio of 2:1, whereas treatment of dilithio salt of 4 with TiCl(3)(thf)(3) in Et(2)O afforded chloride-bridged dimeric titanium(III) complex 8, which indicated the antiferromagnetic character in a nonpolar solvent solution. Di(isopropoxy) titanium(IV) complex 10 having a C(2)-symmetric cis-α configuration was synthesized by the reaction of 4 with Ti(O(i)Pr)(4) in toluene as yellow crystals. Moreover, the reaction of 4 with Ti(NEt(2))(4) in toluene resulted in the unexpected formation of [OSSO]-type bis(phenolato)-bridged dinuclear diamido titanium(IV) complex 11, which adopted a distorted tetrahedral geometry on the titanium center. These titanium complexes were characterized on the basis of their NMR spectroscopic data, and the molecular structures of complexes 8, 10, and 11 were established by single crystal X-ray diffraction. The titanium(IV) and (III) complexes 6 and 8 upon activation with a cocatalyst in toluene polymerized 1-hexene isospecifically to produce poly(1-hexene) having high molecular weight (M(w) = 22,000-52,000 g mol(-1)) and relatively narrow polydispersity (M(w)/M(n) = 1.7-1.8), albeit with low activity [0.27-1.0 g mmol(cat)(-1) h(-1)].     

Pd/C-catalyzed one-pot Suzuki-Miyaura cross-coupling/hydrogenation of pyridine derivatives

Using bromopyridines and methoxyphenyl boronic acid as starting materials, consecutive Suzuki-Miyaura cross-coupling and hydrogenation reactions were undertaken using a heterogeneous Pd/C catalyst in one-pot manner under mild conditions (balloon-pressure at room temperature for hydrogenation) with excellent yield. To counter Pd leaching as well as catalyst poisoning, addition of an appropriate amount of H₂O was crucial to achieving successful AcOH-promoted hydrogenation, which ensured a selective reduction of the pyridine rings to the corresponding piperidines.     

Lagrangian finite element method for the analysis of two-dimensional sloshing problems

A new version of a numerical algorithm for the Lagrangian treatment of incompressible fluid flows with free surfaces is developed. The novel features of the present method are the adoptions of the Lagrangian finite element method and the velocity correction technique. The use of the velocity correction approach makes the computational scheme extremely simple in algorithmic structure. Hence, the present method is particularly attractive for large-scale problems. The techniques discussed here are applied to some two-dimensional sloshing problems, which may indicate the versatility and effectiveness of the present method.