Development of a small X-ray source using an ultraviolet laser and pyroelectric crystal

We investigate a miniaturized X-ray source using an ultraviolet (UV) laser and a pyroelectric crystal and discuss potential applications in medicine. The UV laser is the fourth harmonic of a Nd:YAG laser with a wavelength of 266 nm, repetition rate of 10 Hz, and pulse energy of 40 mJ. The pyroelectric crystal is a LiNbO₃ cylinder of diameter 10 mm and length 6 mm. The prototype X-ray source we fabricated is an aluminum parallelepiped of dimensions 3 × 3 × 5 cm. The X-ray count rate of the X-ray source is maximized at approximately 1,400 cps for UV laser irradiation of approximately 5 min. After 30 min of irradiation by the UV laser, the temperature of the pyroelectric crystal rose from 295 K to 312 K. The principles of X-ray generation ensure that X-ray sources using UV lasers and pyroelectric crystals offer ample opportunity for miniaturization. We believe the X-ray source developed in this work is suitable for medical applications, although further study is needed to address points such as increasing the X-ray count rate and adjusting the temperature of the pyroelectric crystal.     

Interaction of water vapor with gamma-radiation-induced defects in proton conductive polymers

The correlation between protonic conduction and the amount of radiation-induced defects in gamma-ray-irradiated perfluorosulfonic acid (PFSA) polymers (Aciplex-SF-1004^®) has been investigated using a direct-current resistance method, transmission spectroscopy for the ultraviolet (UV) and visible (Vis) wavelength ranges and Fourier transform infrared (FTIR) spectroscopy with the attenuated total refraction (ATR) technique. The proton conductivity of the polymers, which are irradiated with a dose of up to 532 kGy under vacuum at room temperature and subsequently exposure to air, is enhanced by approximately three orders of magnitude as compared to that of the unirradiated polymer. The UV–Vis spectra of the irradiated polymers reveal the presence of fluorocarbon radicals, which increase with the irradiation dose. It is also observed in the UV–Vis and FTIR spectra that peroxy free radicals, unsaturated species (COF), and a carboxyl group (COOH) containing a carbon-oxygen double bond are formed by reactions of the fluorocarbon radicals with oxygen or water vapor in air. In addition, an increase in the hydrogen concentration is observed in the near-surface regions of the irradiated polymers by using an elastic recoil detection (ERD) technique. The production of charge carriers such as protons and oxonium ions (H₃O⁺) by the interaction of water vapor with the activating-radiation-induced defects leads to the enhancement of the proton conductivity.     

Molecular origin for rheological characteristics of native gellan gum

The ¹H-nuclear magnetic resonance spectrum showed that the l-rhamnosyl residues of native gellan gum were coinvolved in both a small number of ⁴C₁-pyranose conformations and a large number of ¹C₄-pyranose conformations, whereas for deacylated polymer, almost of the residues were involved in ⁴C₁-pyranose conformation. The flow curves of native gellan gum showed plastic behavior above 0.2%. The elastic modulus stayed at a constant value with increase in temperature up to 40 °C, then decreased rapidly. The elastic modulus increased with addition of CaCl₂ (6.8 mM) and stayed constant value with increase in temperature up to 65 °C, then decreased rapidly. The stronger elastic modulus was observed in deacylated gellan gum with addition of CaCl₂. The elastic modulus of native gellan gum showed larger value than that in aqueous solution in the presence of urea (4.0 M). Intra- and intermolecular associations of native gellan gum molecules in the presence of Ca⁺² were proposed.     

Specifications of a neutron exposure accelerator system for biological effects experiments (NASBEE) in NIRS

We developed a neutron irradiation facility, neutron exposure accelerator system for biological effect experiments (NASBEE) for biological studies in National Institute of Radiological Sciences, Japan. Irradiation field of 2 MeV average neutrons generated by a Be(d–n)B reaction is established. Dose uniformity of 240 mm in diameter irradiation field is producible within ±2.5% with a dose rate of 0.87 Gy/h at sample target distance of 1170 mm. Two irradiation rooms, a specific pathogen-free (SPF) conditioned one and a conventional, are now available. Irradiation protocols for in vitro experiments are now established and demonstrated by obtaining a relative biological effectiveness (RBE) of cell inactivation measured to be 3.54 with 10% survival dose (D₁₀).     

Mechanistic study of the electrodeposition of nanoporous self-assembled ZnO/Eosin Y hybrid thin films: effect of eosin concentration

ZnO films prepared by one-step electrodeposition in the presence of dissolved eosin molecules present an internal nanoporous hybrid structure resulting from self-assembling processes occurring in solution between ZnO and eosin components. This study aims to better understand the underlying growth mechanism, which is still unexplained. The films were deposited by cathodic electrodeposition from an oxygen-saturated aqueous zinc chloride solution. The effects of the addition of 10 to 100 micromol.L(-1) eosin Y, as a sodium salt, on the growth rate and film properties, were systematically studied while all other parameters remained constant (concentrations of zinc salt and supporting electrolyte, applied potential of -1.4 V versus the mercurous sulfate electrode (MSE), temperature of 70 degrees C, rotating disk electrode at 300 rotations per min, and a glass-coated tin oxide electrode). It is shown that the addition of eosin provokes the formation of a nanoporous "cauliflower" structure whose nodule size and composition depend on the eosin concentration in the bath. The growth rate of the hybrid films increases markedly with the eosin concentration. The ZnO and eosin contents of the films are determined for each concentration by chemical analysis. Comparing with thickness determinations, it is shown that the total porosity increases up to 60-65% in volume fraction toward an eosin concentration of 100 micromol.L(-1). The empty pore volume fraction increases up to about 30% at an eosin concentration of about 20 micromol.L(-1) and then decreases. These correlations have been precisely established for the first time. It is shown that the global composition is fixed by the relative rate of deposition for zinc oxide, which is constant, and for the relative rate of eosin inclusion, which is proportional to the concentration in solution. This is explained on the basis of different steps in the growth mechanism, in particular, a diffusion effect limitation for both oxygen and eosin. This variation explains part of the increase in the growth rate. Another contribution is related by the structural effect on the nanoscale leading to the formation of the interpenetrated porous network. Competition between empty and eosin-filled parts of the pore network is evidenced. The formation of the porous network structure could be governed by a diffusion-limited aggregation mechanism. The system may represent a reference case of competing reactions in the electrochemical self-assembly of hybrid nanostructures.     

Rupture and regeneration of colloidal crystals as studied by two-dimensional ultra-small-angle X-ray scattering

The structure of colloidal crystals of silica particles in water was studied by using the two-dimensional (2D) ultra-small-angle X-ray scattering (USAXS) technique. By violent shaking of the dispersion, large (body-centered cubic, bcc) crystals were broken into microcrystals while the lattice structure and lattice constant were preserved. The 2D-USAXS profiles revealed that the [111] direction of bcc microcrystals was parallel to the capillary axis and their orientational distribution with respect to the capillary axis was random. While a prepeak was observed in the one-dimensional USAXS measurements, no such peak was detected by the 2D-USAXS technique. The prepeak was concluded to be due to {110} being rotated by 54.7 degrees (the angle between [001] and [111]) from the capillary axis. The diffraction from the plane was out of the horizontal plane and was observed at a lower angle as a prepeak by detector scanning in the horizontal direction.     

Electrochromic hysteresis performance of a prussian blue film arising from electron-transfer control by a tris(2,2'-bipyridine)ruthenium(II)-doped WO(3) film as studied by a spectrocyclic voltammetry technique

A [Ru(bpy)(3)](2+) (bpy=2,2'-bipyridine)-doped WO(3) film was prepared as a base layer on a substrate by cathodic electrodeposition from a colloidal triad solution containing peroxotungstic acid (PTA), [Ru(bpy)(3)](2+), and poly(sodium 4-styrenesulfonate) (PSS). A Prussian blue (PB; Fe(II)-Fe(III)) film was cathodically electrodeposited on the [Ru(bpy)(3)](2+)-doped WO(3) film or neat WO(3) film from an aqueous Berlin brown (BB; Fe(III)-Fe(III)) colloid solution to yield a [Ru(bpy)(3)](2+)-doped WO(3)/PB bilayer film or WO(3)/PB bilayer film. For the spectrocyclic voltammogram (SCV) of the WO(3)/PB film, a redox response of Prussian white (PW; Fe(II)-Fe(II))/PB was observed at 0.11 V, however, further oxidation of PB to BB was not allowed by the interfacial n-type Schottky barrier between the WO(3) and PB layers. For the [Ru(bpy)(3)](2+)-doped WO(3)/PB film, any electrochemical response assigned to the redox of PB was not observed in the cyclic voltammogram, however, the in situ absorption spectral change recorded simultaneously showed the significant redox reactions based on PB. The SCV revealed that PW on the [Ru(bpy)(3)](2+)-doped WO(3) film is completely oxidized to PB by a geared reaction of Ru(II)/Ru(III) at 1.05 V, and that 32 % of PB formed is further oxidized to BB by the same geared reaction in the potential scan to 1.5 V. PB was completely re-reduced to PW by a geared reaction of H(x)WO(3)/WO(3) at -0.5 V in the reductive potential scan. These geared electrochemical reactions produced an electrochromic hysteresis performance of the PB film layered on the [Ru(bpy)(3)](2+)-doped WO(3) film.     

Determination of erythromycin A in rat plasma and urine by high-performance liquid chromatography with chemiluminescence detection using Tris(2,2'-bipyridine)ruthenium(II)

A simple and sensitive method was developed for the determination of erythromycin A (EA), decladinosyl erythromycin A (dClEA) and erythromycin B (EB) in rat plasma and urine by high-performance liquid chromatography with electrogenerated chemiluminescence detection using Tris(2,2'-bipyridine)ruthenium(II). The recovery rates of EA, dClEA and EB were 97, 94 and 85% from rat plasma and 89, 83 and 93% from rat urine, respectively. The calibration curves were linear over the concentration ranges 0.05-5 microg/mL for plasma and 0.5-50 microg/mL for urine. The precision and accuracy for all analytes in rat plasma were < or =9.0 and -6.3-7.2%, and those in urine were < or =9.4% and -6.1-7.6%, respectively. This method proved to be a powerful tool for determination of EA, dClEA and EB concentrations in samples from rats.     

A combinatorial sample-preparation robot system using the volumetric-weighing method

We have developed a new automatic sample-preparation robot system with use of the volumetric-weighing method. In this system, slurries, aqueous solutions, and other wet reagents are employed as starting materials and 64 (8×8) samples at the maximum are prepared on a library plate of 35 mm × 35 mm size. Volumetric-weighing and mixing of the starting materials and distributing reaction mixtures to the library plate are automatically performed by computer-controlled mechanisms with an easy-to-use programming software interface. While this robot is designed in terms of space saving and portability, it is able to equip with an atmosphere-controlled furnace to sinter the samples on the library plate. Typical preparation time for a library plate of 36 (6×6) samples is less than 40 min. This robot system is promising in enhancing throughput of wet-chemically synthesized materials researches.     

Comparison of accuracy of intravoxel incoherent motion and apparent diffusion coefficient techniques for predicting malignancy of head and neck tumors using half-Fourier single-shot turbo spin-echo diffusion-weighted imaging

Purpose

To evaluate the use of the intravoxel incoherent motion (IVIM) technique in half-Fourier single-shot turbo spin-echo (HASTE) diffusion-weighted imaging (DWI), and to compare its accuracy to that of apparent diffusion coefficient (ADC) to predict malignancy in head and neck tumors.

Patients and methods

HASTE DW images of 33 patients with head and neck tumors (10 benign and 23 malignant) were evaluated. Using the IVIM technique, parameters (D, true diffusion coefficient; f, perfusion fraction; D*, pseudodiffusion coefficient) were calculated for each tumor. ADC values were measured over a range of b values from 0 to 1000 s/mm². IVIM parameters and ADC values in benign and malignant tumors were compared using Student's t test, receiver operating characteristics (ROC) analysis, and multivariate logistic regression modeling.

Results

Mean ADC and D values of malignant tumors were significantly lower than those of benign tumors (P < 0.05). Mean D* values of malignant tumors were significantly higher than those of benign tumors (P < 0.05). There was no significant difference in mean f values between malignant and benign tumors (P > 0.05). The technique of combining D and D* was the best for predicting malignancy; accuracy for this model was higher than that for ADC.

Conclusions

The IVIM technique may be applied in HASTE DWI as a diagnostic tool to predict malignancy in head and neck masses. The use of D and D* in combination increases the diagnostic accuracy in comparison with ADC.