Rhodium(I)-catalyzed addition of arylboronic acids to (benzyl-/arylsulfonyl)acetonitriles: efficient synthesis of (Z)-β-sulfonylvinylamines and β-keto sulfones

An efficient rhodium(I)-catalyzed addition of arylboronic acids to (benzyl-/arylsulfonyl)acetonitrile is described. Novel β-sulfonylvinylamine products are formed in a stereoselective fashion (Z-alkene). Upon hydrolysis, useful β-keto sulfones are obtained with a broad scope of aryl and sulfonyl substituents.     

Fabrication and characterization of freestanding ultrathin diamond-like carbon targets for high-intensity laser applications

Here, we report the fabrication of diamond-like carbon (DLC) thin films using pulsed laser deposition (PLD). PLD is a well-established technique for deposition of high-quality DLC thin films. Carbon tape target was ablated using a KrF (248 nm, 25 ns, 20 Hz) excimer laser to deposit DLC films on soap-coated substrates. A laser fluence between 8.5 and 14 J/cm² and a target to substrate distance of 10 cm was used. These films were then released from substrates to obtain freestanding DLC thin foils. Foil thicknesses from 20 to 200 nm were deposited using this technique to obtain freestanding targets of up to 1-inch square area. Typically, 100-nm-thick freestanding DLC films were characterized using different techniques such as AFM, XPS, and nano-indentation. AFM was used to obtain the film surface roughness of 9 nm rms of the released film. XPS was utilized to obtain 74 % sp², 23 % sp³, and 3 % C–O bond components. Nano-indentation was used to characterize the film hardness of 10 GPa and Young’s modulus of 110 GPa. Damage threshold properties of the DLC foils were studied (1,064 nm, 6 ns) and found to be 7 × 10¹⁰ W/cm² peak intensity for our best ultrathin DLC foils.     

Electrical transport and superconductivity in the Al2O3-Bi2Sr1.8Ca1.2Cu2Oy and MgO-Bi2Sr1.8Ca1.2Cu2Oy composites

We have measured the resistivities of Al₂O₃-Bi₂Sr_1.8Ca_1.2Cu₂O_y and MgO-Bi₂Sr_1.8Ca_1.2Cu₂O_y composites with the nominal Bi₂Sr_1.8Ca_1.2Cu₂O_y volume fraction, ₂₂₁₂, ranging from 0.15 to 1.00. For the Al₂O₃-Bi₂Sr_1.8Ca_1.2Cu ₂O_y composites, we find for the samples with ₂₂₁₂≥0.6 that the superconducting transition temperature, T_c, is not disturbed by the addition of Al₂O₃. For ₂₂₁₂<0.3, no zero-resistivity state is observed. For the MgO-Bi₂Sr_1.8Ca_1.2Cu₂O_y composites, T_c is barely disturbed for the samples with ρ₂₂₁₂≥0.7. No superconducting state is observed for the samples with ρ₂₂₁₂<0.35. The variation of (300 K) with ρ₂₂₁₂ indicates a three-dimensional percolating Bi-Sr-Ca-Cu-O matrix occurring at ρ₂₂₁₂≈0.19 and ≈0.15 in Al₂O₃-Bi₂Sr_1.8Ca_1.2 Cu₂O_y and MgO-Bi₂Sr_1.8Ca_1.2Cu₂O_y, respectively. Both resistivity and magnetization measurements suggest that the reactions of Bi₂Sr_1.8Ca_1.2Cu₂O_y with MgO are weaker than with Al₂O₃.     

A study of upstream-weighted high-order differencing for approximation to flow convection

This paper is concerned with a number of upstream-weighted second- and third-order difference schemes. Also considered are the conventional upwind and central difference schemes for comparison. It commences with a general difference equation which unifies all the given first-, second- and third-order schemes. The various schemes are evaluated through the use of the general equation. The unboundedness and accuracy of the solutions by the difference schemes are assessed via various analyses: examination of the coefficients of the difference equation, Taylor series truncation error analysis, study of the upstream connection to numerical diffusion, single-cell analysis. Finally, the difference schemes are tested on one- and two-dimensional model problems. It is shown that the high-order schemes suffer less from the problem of numerical diffusion than the first-order upwind difference scheme. However, unboundedness cannot be avoided in the solutions by these schemes. Among them the linear upwind difference scheme presents the best compromise between numerical diffusion and solution unboundedness.     

A plasma resonance study of valley transfer in (001) Si inversion layers

We observed the two-dimensional plasmons of the two-component electron plasma in the (001) Si-inversion layer resulting from simultaneous population of the [001] valley, E₀, and the [010] valley, E₀′, subbands under a compressional uniaxial stress along [010]. Our data show an onset of electron transfer from E₀ to E₀′ at X = (1.4 ± 0.1) kbar for n = 1.67 × 10¹² cm^?2 and X = (1.2 ± 0.2) kbar for n = 2.60 × 10¹² cm^?2, consistent with the theory of Takada and Ando that includes the electron-electron correlation effects.     

Observation of valley splitting in (lll) n-type silicon inversion layers

An additional splitting of Shubnikov-de Haas oscillations in (lll) n-type silicon inversion layers in observed. We attribute it to valley splitting, analogous to that previously observed on (100) surface layers, and point out that theoretical explanations of valley splitting, restricted to the valley configuration in (100) inversion layers, are not applicable.     

Is the dynamics of polystyrene films consistent with their glass transition temperature?

Experiments in the past 1.5 decades have found that the glass transition temperature of polymer films can be noticeably different from the bulk when the film thickness is decreased below ∼100  nm. On the other hand, many dynamic measurements have found results inconsistent with the observed change in the glass transition temperature. One frequently cited reason is that the dynamic properties being probed may not be directly related to the glass transition. Viscosity is a property traditionally used to characterize the dynamic slowing down occurring to a material at the glass transition. In this paper, we report experimental result showing that the viscosity of polystyrene films supported by oxide-coated silicon decreases with decreasing film thickness, consistent with the observed glass transition temperature of the films.     

Observation of pinning mode of stripe phases of 2D systems in high Landau levels

We study the radio-frequency diagonal conductivities of the anisotropic stripe phases of higher Landau levels near half-integer fillings. In the hard direction, in which larger dc resistivity occurs, the spectrum exhibits a striking resonance, while in the orthogonal, easy direction, no resonance is discernible. The resonance is interpreted as a pinning mode of the stripe phase.     

Window-modulated compounding Nakagami imaging for ultrasound tissue characterization

Ultrasound Nakagami parametric imaging is a useful tool for tissue characterization. Previous literature has suggested using a square with side lengths corresponding to 3 times the transducer pulse length as the minimum window for constructing the Nakagami image. This criterion does not produce sufficiently smooth images for the Nakagami image to characterize homogeneous tissues. To improve image smoothness, we proposed window-modulated compounding (WMC) Nakagami imaging based on summing and averaging the Nakagami images formed using sliding windows with varying window side lengths from 1 to N times the transducer pulse length in 1 pulse length step. Simulations (the number densities of scatterers: 2–16 scatterers/mm²) and experiments on fully developed speckle phantoms (the scatterer diameters: 20–106 μm) were conducted to suggest an appropriate number of frames N and to evaluate the image smoothness and resolution by analyzing the full width at half maximum (FWHM) of the parameter distribution and the widths of the image autocorrelation function (ACF), respectively. In vivo ultrasound measurements on rat livers without and with cirrhosis were performed to validate the practical performance of the WMC Nakagami image in tissue characterization. The simulation results showed that using a range of N from 7 to 10 as the number of frames for image compounding reduces the estimation error to less than 5%. Based on this criterion, the Nakagami parameter obtained from the WMC Nakagami image increased from 0.45 to 0.95 after increasing the number densities of scatterers from 2 to 16 scatterers/mm². The FWHM of the parameter distribution (bins = 40) was 13.5 ± 1.4 for the Nakagami image and 9.1 ± 1.43 for the WMC Nakagami image, respectively (p-value < .05). The widths of the ACF for the Nakagami and WMC Nakagami images were 454 ± 5.36 and 458 ± 4.33, respectively (p-value > .05). In the phantom experiments, we also found that the FWHM of the parameter distribution for the WMC Nakagami image was smaller than that of the conventional Nakagami image (p-value < .05), and there was no significant difference of the ACF width between the Nakagami and WMC Nakagami images (p-value > .05). In the animal experiments, the Nakagami parameters obtained from the WMC Nakagami image for normal and cirrhotic rat livers were 0.62 ± 0.08 and 0.92 ± 0.07, respectively (p-value < .05). The results demonstrated that the WMC technique significantly improved the image smoothness of Nakagami imaging without resolution degradation, giving Nakagami model-based imaging the ability to visualize scatterer properties with enhanced image quality.