Fluoride-induced chemiluminescent decomposition of dioxetanes bearing a siloxyaryl moiety to produce an alkyl aryl ketone as an emitter

Tetrabutylammonium fluoride induces the decomposition of 1-tert-butyl-4,4-dimethyl-5-(3-siloxyphenyl)-2,6,7-trioxabicyclo[3.2.0]heptane (4a) in DMSO to form an oxyanion of aromatic ketone (14a) as an emitter with high singlet-chemiexcitation yield comparable with that for a chemically initiated electron exchange luminescence (CIEEL) active dioxetane producing an oxyanion of aromatic ester as an emitter. A 7-siloxynaphthalen-2-yl analog (4b) was found on similar treatment to emit light with the maximum wavelength the longest among CIEEL-active dioxetanes hitherto known.     

Efficient copper-catalyzed coupling of aryl iodides and thiobenzoic acid

A highly efficient copper-catalyzed coupling reaction of aryl iodides and thiobenzoic acid, using 10 mol % of copper iodide, 20 mol % of 1,10-phenanthroline, and ⁱPr₂NEt in toluene, was developed. This methodology is applicable to a variety of aryl iodides.     

Synthesis of functionalized hydroquinones via [Cp*RuCl2]2-catalyzed cocyclization of alkynes, alpha,beta-unsaturated carbonyl compounds, and carbon monoxide

[reaction: see text] Catalytic [2 + 2 + 1 + 1] cocyclization reaction of an alkyne, an alkene, and two molecules of carbon monoxide, leading to functionalized hydroquinones, was studied. Using [Cp*RuCl2]2 as a catalyst, we found that a variety of electron-deficient alkenes, such as alpha,beta-unsaturated ketones, esters, amides, and nitriles, can be employed as an alkene coupling partner to give the corresponding hydroquinones.     

Epitaxial Growth of Sr x Ba1 − x Nb2O6 Thin Films Prepared from Sol-Gel Process

In this study, we prepared Sr _x Ba_{1 – x} Nb₂O₆ (x = 0.3, 0.5 and 0.7) thin film on 0.75 wt% La doped SrTiO₃ (100) and (110) single crystal substrates. A homogeneous coating solution was prepared with Sr and Ba acetates and Nb(OEt)₅ as raw materials, and acetic acid and diethlene glycol monomethyl ether as solvents. The substrates were coated with the solution by spin coating method. As-coated thin films were heated from 973 to 1273 K in air. The grains of the thin film on La doped SrTiO₃ (100) were pillar shaped and arranged in right angle to each other. On the other hand, the grains of these thin films on La doped SrTiO₃ were pillar shape and arranged in one direction. The crystallographic relationship of the thin film between Sr _x Ba_{1 – x} Nb₂O₆ and substrate that the 130 and 310 direction of the thin film on the substrate were oriented with c-axis in parallel to the substrate surface. On the other hand, (hk0) phase diffractions of Sr _x Ba_{1 – x} Nb₂O₆ thin film on the substrate (110) were investigated in the XRD theta-2theta measurement. It is expected that the Sr _x Ba_{1 – x} Nb₂O₆ (x = 0.3, 0.5 and 0.7) were highly oriented or epitaxial growing on La doped SrTiO₃ (110) single crystal substrate.     

Effect of pressure on the solubility of naphthalene in water at 25°C

Solubility of naphthalene in water was measured at 25°C and pressures up to 200 MPa. The solubility decreased with increasing pressure. From the pressure coefficient of the solubility, the volume change V accompanying the dissolution was estimated as 13.8±0.4 cm ³ -mol ^–1 . Further we estimated the volume change V _CH accompanying hydrophobic hydration as –0.1±0.6 cm ³ -mol ^–1 using the V value, the molar volume of crystalline naphthalene, and the partial molar volume of naphthalene in n-heptane. This V _CH is much larger (i.e., less negative) than that for hydrophobic hydration of alkyl-chain compounds and suggests that the hydration structure of naphthalene differs from that of alkyl-chain compounds.     

Mercuric triflate-catalyzed synthesis of 2-methylfurans from 1-alkyn-5-ones

[reaction: see text] 2-Methylfurans were prepared by an effective cyclization of 1-alkyn-5-ones in the presence of mercuric triflate as the catalyst under very mild reaction conditions with high catalytic turnover up to 100 times. Benzene, toluene, or dichloromethane was the solvent of choice.     

Catalytic direct 1,4-conjugate addition of aldehydes to vinylketones on secondary-amines immobilised in FSM-16 silica

Direct 1,4-conjugate addition of naked aldehydes to vinylketones is catalysed effectively by N-methyl-3-aminopropylated FSM-16 mesoporous silica, which can be regarded as a novel heterogeneous catalysis for a practical C-C bond formation reaction.     

Bitterness evaluation of medicines for pediatric use by a taste sensor

The purpose of this study was to evaluate the bitterness of 18 different antibiotic and antiviral drug formulations, widely used to treat infectious diseases in children and infants, in human gustatory sensation tests and using an artificial taste sensor. Seven of the formulations were found to have a bitterness intensity exceeding 1.0 in gustatory sensation tests (evaluated against quinine as a standard) and were therefore assumed to have an unpleasant taste to children. The bitterness intensity scores of the medicines were examined using suspensions in water or an acidic sports drink. In the case of three macrolide antibiotic formulations containing erythromycin (ERYTHROCIN dry syrup), clarithromycin (CLARITH dry syrup for pediatric), and azithromycin (ZITHROMAC fine granules for pediatric use), the bitterness intensities of suspensions in acidic sports drinks were dramatically enhanced compared with the corresponding scores of suspensions in water. This enhancement could be predicted using the taste sensor. On the other hand, a reduction of bitterness intensity was observed for an acidic sports drink suspension of an amantadine product (SYMMETREL fine granules) compared with an aqueous suspension. This reduction in bitterness could also be predicted using the taste sensor output value. Thus, the taste sensor could predict whether or not suspension in an acidic sports drink would enhance or reduce the bitterness intensity of pediatric drug formulations, compared with suspensions in water.     

Controllable donor-acceptor neutral [2]rotaxanes

In pursuit of a neutral bistable [2]rotaxane made up of two tetraarylmethane stoppers--both carrying one isopropyl and two tert-butyl groups located at the para positions on each of three of the four aryl rings--known to permit the slippage of the pi-electron-donating 1,5-dinaphtho[38]crown-10 (1/5DNP38C10) at the thermodynamic instigation of pi-electron-accepting recognition sites, in this case, pyromellitic diimide (PmI) and 1,4,5,8-naphthalenetetracarboxylate diimide (NpI) units separated from each other along the rod section of the rotaxane's dumbbell component, and from the para positions of the fourth aryl group of the two stoppers by pentamethylene chains, a modular approach was employed in the synthesis of the dumbbell-shaped compound NpPmD, as well as of its two degenerate counterparts, one (PmPmD) which contains two PmI units and the other (NpNpD) which contains two NpI units. The bistable [2]rotaxane NpPmR, as well as its two degenerate analogues PmPmR and NpNpR, were obtained from the corresponding dumbbell-shaped compounds NpPmD, PmPmD, and NpNpD and 1/5DNP38C10 by slippage. Dynamic 1H NMR spectroscopy in CD2Cl2 revealed that shuttling of the 1/5DNP38C10 ring occurs in NpNpR and PmPmR, with activation barriers of 277 K of 14.0 and 10.9 kcal mol(-1), respectively, reflecting a much more pronounced donor-acceptor stabilizing interaction involving the NpI units over the PmI ones. The photophysical and electrochemical properties of the three neutral [2]rotaxanes and their dumbbell-shaped precursors have also been investigated in CH2Cl2. Interactions between 1/5DNP38C10 and PmI and NpI units located within the rod section of the dumbbell components of the [2]rotaxane give rise to the appearance of charge-transfer bands, the energies of which correlate with the electron-accepting properties of the two diimide moieties. Comparison between the positions of the visible absorption bands in the three [2]rotaxanes shows that, in NpPmR, the major translational isomer is the one in which 1/5DNP38C10 encircles the NpI unit. Correlations of the reduction potentials for all the compounds studied confirm that, in this non-degenerate [2]rotaxane, one of the translational isomers predominates. Furthermore, after deactivation of the NpI unit by one-electron reduction, the 1/5DNP38C10 macrocycle moves to the PmI unit. Li+ ions have been found to strengthen the interaction between the electron-donating crown ether and the electron-accepting diimide units, particularly the PmI one. Titration experiments show that two Li+ ions are involved in the strengthening of the donor-acceptor interaction. Addition of Li+ ions to NpPmR induces the 1/5DNP38C10 macrocycle to move from the NpI to the PmI unit. The Li+-ion-promoted switching of NpPmR in a 4:1 mixture of CD2Cl2 and CD3COCD3 has also been shown by 1H NMR spectroscopy to involve the mechanical movement of the 1/5DNP38C10 macrocycle from the NpI to the PmI unit, a process that can be reversed by adding an excess of [12]crown-4 to sequester the Li+ ions.     

1,2-silyl-migrative cyclization of vinylsilanes bearing a hydroxy group: stereoselective synthesis of multisubstituted tetrahydropyrans and tetrahydrofurans(1)

Acid-catalyzed intramolecular addition of a hydroxy group to alpha-alkylated vinylsilanes has been studied. Treatment of (Z)-5-alkyl-5-silyl-4-penten-1-ols 1 (R = alkyl) with 5 mol % TiCl(4) in CHCl(3) gave trans-2-alkyl-3-silyltetrahydropyrans 2 exclusively (trans/cis = >99/1 to 97/3). The cyclization efficiency and rate strongly depended on the geometry of the C-C double bond and the silyl group. The use of (E)-vinylsilanes resulted in lower yields with poor cis-selectivity. In the cyclization of (Z)-1 (R = Bu), the silyl group used, the reaction time, and the yield of 2 were as follows: SiMe(2)Ph, 9.5 h, 75%; SiMe(3), 7.5 h, 66%; SiMePh(2), 24 h, 58%; SiMe(2)-t-Bu, 0.75 h, 85%; SiMe(2)Bn, 1.5 h, 78%. This 1,2-silyl-migrative cyclization could be applied to stereoselective synthesis of trisubstituted tetrahydropyrans. The acid-catalyzed reaction of 1-, 2-, or 3-substituted (Z)-5-silyl-4-nonen-1-ols 8 gave r-2,t-3,c-6-, r-2,t-3,t-5-, or r-2,t-3,c-4-trisubstituted tetrahydropyrans with high diastereoselectivity, respectively. (Z)-4-Alkyl-4-silyl-3-buten-1-ols 5 as well as 1 underwent the 1,2-silyl-migrative cyclization to give 2-alkyl-3-silyltetrahydrofurans 6 with high trans-selectivity. This silicon-directed cyclization was also available for the stereoselective synthesis of tri- and tetrasubstituted tetrahydrofurans.