Chemical reaction dynamics of PeCB and TCDD decomposition: A tight‐binding quantum chemical molecular dynamics study with first‐principles parameterization

The decomposition reaction dynamics of 2,3,4,4′,5‐penta‐chlorinated biphenyl (2,3,4,4′,5‐PeCB), 3,3′,4,4′,5‐penta‐chlorinated biphenyl (3,3′,4,4′,5‐PeCB), and 2,3,7,8‐tetra‐chlorinated dibenzo‐p‐dioxin (2,3,7,8‐TCDD) was clarified for the first time at atomic and electronic levels, using our novel tight‐binding quantum chemical molecular dynamics method with first‐principles parameterization. The calculation speed of our new method is over 5000 times faster than that of the conventional first‐principles molecular dynamics method. We confirmed that the structure, energy, and electronic states of the above molecules calculated by our new method are quantitatively consistent with those by first‐principles calculations. After the confirmation of our methodology, we investigated the decomposition reaction dynamics of the above molecules and the calculated dynamic behaviors indicate that the oxidation of the 2,3,4,4′,5‐PeCB, 3,3′,4,4′,5‐PeCB, and 2,3,7,8‐TCDD proceeds through an epoxide intermediate, which is in good agreement with the previous experimental reports and consistent with our static density functional theory calculations. These results proved that our new tight‐binding quantum chemical molecular dynamics method with first‐principles parameterization is an effective tool to clarify the chemical reaction dynamics at reaction temperatures. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Structure of aszonalenin,a new metabolite of aspergillus zonatus

Aszonalenin ($\text{1}$) has been isolated from $\text{Aspergillus zonatus}$ together with LL-S490β ($\text{2}$) and the structure of $\text{1}$ has been established by spectroscopic evidences and chemical transformation.     

Polymerization of allyl esters of unsaturated acids. VII. Copolymerization of methyl allyl maleate and fumarate with styrene

Radical copolymerizations of methyl allyl maleate (MAM) and methyl allyl fumarate (MAF) with styrene (St) are carried out in bulk using AIBN as an initiator at 60°C, and their copolymerization behaviors are compared in detail. The different rate features are observed with each other; thus in the MAF-St copolymerization the rate was quite enhanced and, also, the maximum rate was found at the molar ratio of 1:1 in the monomer feed, whereas no maximum phenomenon of the rate was apparent for the MAM—St copolymerization. The copolymerizability of MAF with St was quite high, whereas that of MAM was very poor. The cyclization of MAM or MAF was hindered by the highly reactive St monomer. These results are discussed in terms of the formation of the charge—transfer complex between MAF and St and, furthermore, the cyclocopolymerization kinetics involving the 17 elementary reactions as the propagation reactions.     

Molecular dynamics study of the methanol effect on the membrane morphology of perfluorosulfonic ionomers

The membranes of a perfluorosulfonic acid polymer swollen in 10-80 wt % methanol solution were investigated to elucidate the methanol effect on their morphologies, such as size of the solvent cluster, solvent location, and polymer structure, by using isothermal-isobaric molecular dynamics simulations. In higher methanol concentrations, we found less-spherical solvent aggregation and a more spread polymer structure because of the ampholytic nature of methanol. The partial radial distribution functions between solvent oxygen and fluorocarbons, which are composed of the main chain, clearly show that methanol is located closer to the polymer matrix than water. On the other hand, water is preferentially located in the vicinity of an acidic headgroup, SO(3)(-), compared with methanol, although both have similar attractive interaction energies to the acidic group. Furthermore, we discussed solvent dynamics and hydrogen bonding between sulfonic oxygen and solvent O-H groups.     

Total synthesis of cis-solamin

[structure: see text] A convergent total synthesis of cis-solamin and its diastereomer was accomplished using VO(acac)2-catalyzed diastereoselective epoxidation followed by cyclization of bis-homoallylic alcohol as the key step. By comparison of the optical rotation of two possible diastereomers, it is suggested that the absolute configuration of natural cis-solamin is 1a.     

Regiospecific allylation of acetals with allylsilanes catalyzed by iodotrimethylsilane. Synthesis of homoallylethers

Allylation of acetals with allylsilanes is catalyzed by iodotrimethylsilane to give the corresponding homoallyl ethers, with regiospecific transposition of the allyl group.     

Polymerization of allyl esters of unsaturated acids. V. Cyclopolymerization of methyl allyl fumarate

The kinetics of radical polymerization of methyl allyl fumarate (MAF) is discussed in terms of cyclopolymerization and compared with the polymerization results of methyl allyl maleate (MAM) as a cis isomer. In the polymerization of MAF, the rate and degree of polymerization were quite enhanced compared with MAM, and gelation occurred at low conversion. The content of the unreacted allylic double bonds of the MAF polymer was quite large; whereas those of the unreacted fumaric double bonds and the cyclic structural units showed reverse tendencies. Only a slight presence of a five-membered ring was observed in the MAF polymer. The cyclization constants K_A and K_V, the ratios of the rate constants of the unimolecular cyclization reaction to those of the bimolecular propagation reaction of the uncyclized allylic and fumaric radicals, were estimated to be 2.73 and 1.48 mole/liter, respectively. These values suggest the great difference in the cyclopolymerization behavior between two isomeric monomers. These results are discussed in detail in connection with the high reactivity of the fumaric double bond compared to the maleic double bond. In addition, the formation mode and the sequence distribution of the structural units of the polymer produced are discussed on the basis of these analytical results. Thus, for the MAF polymer obtained in the bulk polymerization, about 60% of the cyclic structure can be formed via the intramolecular attack of the uncyclized fumaric radical on the allylic double bond, as opposed to the case of MAM via the predominant intramolecular attack (ca. 90%) of the uncyclized allylic radical on the maleic double bond; these results and the low probability for the succession of cyclic structures and the rather high probability of a vinyl-to-vinyl addition are presented.     

On fluctuations in μ-space

A master equation is derived microscopically to describe the fluctuating motion of the particle density in . space. This equation accounts for the drift motion of particles and is valid for any inhomogeneous gas. The Boltzmann equation is obtained from the first moment of this equation by neglecting the second cumulant (the pair correlation function). The successive moments form coarse-grained BBGKY-like hierarchy equations, in which small spatial regions with r_ij < the force range are smeared out. These hierarchy equations are convenient for investigating the nonequilibrium long-range pair correlation function, which arises mainly from sequences of isolated binary collisions and gives rise to the much-discussed long-time tail and the logarithmic term in the density expansion of transport coefficients. It is shown to have a spatial long tail, like the Coulombic potential, in a steady laminar flow. The stochastic nature of the nonlinear Boltzmann-Langevin equation is also investigated; the random source term is found to be expressed as a linear superposition of Poisson random variables and to become Gaussian in special cases.     

Synthesis of Arenethiolate Complexes of Divalent and Trivalent Lanthanides from Metallic Lanthanides and Diaryl Disulfides: Crystal Structures of [{Yb(hmpa)(3)}(2)(&mgr;-SPh)(3)][SPh] and Ln(SPh)(3)(hmpa)(3) (Ln = Sm, Yb; hmpa = Hexamethylphosphoric Triamide)

A convenient and one-pot synthetic method of lanthanide thiolate compounds was developed. An excess of metallic samarium, europium, and ytterbium directly reacted with diaryl disulfides in THF to give selectively Ln(II) thiolate complexes, [Ln(SAr)(&mgr;-SAr)(thf)(3)](2) (1, Ln = Sm; 2, Ln = Eu; Ar = 2,4,6-triisopropylphenyl), Yb(SAr)(2)(py)(4) (3, py = pyridine), and [{Ln(hmpa)(3)}(2)(&mgr;-SPh)(3)][SPh] (6, Ln = Sm; 7, Ln = Eu; 8, Ln = Yb; hmpa = hexamethylphosphoric triamide). Reaction of metallic lanthanides with 3 equiv of disulfides afforded Ln(III) thiolate complexes, Ln(SAr)(3)(py)(n)()(thf)(3)(-)(n)() (9a, Ln = Sm, n = 3; 9b, Ln = Sm, n = 2; 10, Ln = Yb, n = 3) and Ln(SPh)(3)(hmpa)(3) (11, Ln = Sm; 12, Ln = Eu; 13, Ln = Yb). Thus, Ln(II) and Ln(III) thiolate complexes were prepared from the same source by controlling the stoichiometry of the reactants. X-ray analysis of 8 revealed that 8 has the first ionic structure composed of triply bridged dinuclear cation and benezenethiolate anion [8, orthorhombic, space group P2(1)2(1)2(1) with a = 21.057(9), b = 25.963(7), c = 16.442(8) ?, V = 8988(5) ?(3), Z = 4, R = 0.040, R(w) = 0.039 for 5848 reflections with I > 3sigma(I) and 865 parameters]. The monomeric structures of 11 and 13 were revealed by X-ray crystallographic studies [11, triclinic, space group P&onemacr; with a = 14.719(3), b = 17.989(2), c = 11.344(2) ?, alpha = 97.91(1), beta = 110.30(2), gamma = 78.40(1) degrees, V = 2751.9(9) ?(3), Z = 2, R = 0.045, R(w) = 0.041 for 7111 reflections with I > 3sigma(I) and 536 parameters; 13, triclinic, space group P&onemacr; with a = 14.565(2), b = 17.961(2), c = 11.302(1) ?, alpha = 97.72(1), beta = 110.49(1), gamma = 78.37(1) degrees, V = 2706.0(7) ?(3), Z = 2, R = 0.031, R(w) = 0.035 for 9837 reflections with I > 3sigma(I) and 536 parameters]. A comparison with the reported mononuclear and dinuclear lanthanide thiolate complexes has been made to indicate that the Ln-S bonds weakened by the coordination of HMPA to lanthanide metals have ionic character.     

Photophysical and (photo)electrochemical properties of a coumarin dye

A new coumarin dye, cyano-{5,5-dimethyl-3-[2-(1,1,6,6-tetramethyl-10-oxo-2,3,5,6-tetrahydro-1H,4H,10H-11-oxa-3a-aza-benzo[de]anthracen-9-yl)vinyl]cyclohex-2-enylidene}-acetic acid (NKX-2753), was prepared and characterized with respect to photophysical and electrochemical properties. It was employed as a dye sensitizer in dye-sensitized solar cells and showed efficient photon-to-electron conversion properties. The photocurrent action spectrum exhibited a broad feature with a maximum incident photon-to-electron conversion efficiency (IPCE) of 84% at 540 nm, which is comparable to that for the famous red dye RuL2(NCS)2 (known as N3), where L stands for 2,2'-bipyridyl-4,4'-dicarboxylic acid. The sandwich-type solar cell with NKX-2753, under illumination of full sun (AM1.5, 100 mW cm(-2)), produced 16.1 mA cm(-2) of short-circuit photocurrent, 0.60 V of open-circuit photovoltage, and 0.69 of fill factor, corresponding to 6.7% of overall energy conversion efficiency using 0.1 M LiI, 0.05 M I2, 0.1 M guanidinium thiocyanate, and 0.6 M 1,2-dimethyl-3-n-propyl-imidazolium iodide in dry acetonitrile as redox electrolyte. In comparison with its analogue NKX-2586 (Langmuir 2004, 20, 4205), NKX-2753 with an extra side ring on the alkene chain produced much higher IPCE values at the same conditions. The side ring acted as a spacer to efficiently prevent dye aggregation when adsorbed on the TiO2 surface, resulting in significant improvements of short-circuit photocurrent, open-circuit photovoltage, and fill factor compared with NKX-2586 that aggregated on the TiO2 surface.