Sticking of carbon nanotube Y junction branches

The coalescence of branches in the Y junctions of single-wall carbon nanotubes (10 nm long) is predicted to occur when the branches approach each other under the action of a load (～10 nN) applied to their ends. A transition to the new state with parallel branches bound by molecular interactions was simulated and the energy characteristics were calculated by the molecular dynamics method. The Y junctions with parallel branches are stable at temperatures up to 2000 K. It is established that there is a threshold distance between the branch ends, below which the branches exhibit spontaneous sticking under the action of molecular attraction forces. If the branches are unloaded before this threshold distance is reached, they oscillate (acting as a nanodimensional “tuning fork”) at a frequency of ～100 GHz.     

Succinic acid adsorption from fermentation broth and regeneration

More than 25 sorbents were tested for uptake of succinic acid from aqueous solutions. The best resins were then tested for successive loading and regeneration using hotwater. The key desired properties for an ideal sorbent are high capacity, complete stable regenerability, and specificity for the product. The best resins have a stable capacity of about 0.06 g of succinic acid/g of resin at moderate concentrations (1–5 g/L) of succinic acid. Several sorbents were tested more exhaustively for uptake of succinic acid and for successive loading and regeneration using hot water. One resin, XUS 40285, has a good stable isotherm capacity, prefers succinate over glucose, and has good capacities at both acidic and neutral pH. Succinic acid was removed from simulated media containing salts, succinic acid, acetic acid, and sugar using a packed column of sorbent resin, XUS 40285. The fermentation byproduct, acetate, was completely separated from succinate. A simple hot water regeneration successfully concentrated succinate from 10 g/L (inlet) to 40–110 g/L in the effluent. If successful, this would lower separation costs by reducing the need for chemicals for the initial purification step. Despie promising initial results of good capacity (0.06 g of succinic/g of sorbent), 70% recovery using hot water, and a recovered concentration of >100 g/L, this regeneration was not stable over 10 cycles in the column. Alternative regeneration schemes using acid and base were examined. Two (XUS 40285 and XFS-40422) showed both good stable capacities for succinic acid over 10 cycles and >95% recovery in a batch operation using a modified extraction procedure combining acid and hot water washes. These resins showed comparable results with actual broth.     

Effect of the Structure of Oxypropylated Hydroxyl-Containing Molecules on Glycolysis of Foamed Polyurethane

The activity of a polyether derived from ethylene and propylene oxides (Laprol 5003) and of N,N,N',N'-tetra(hydroxypropyl)ethylenediamine (Lapramol 294) in glycolytic degradation of elastic foamed polyurethane was studied.     

On the evaluation of the nonisothermal kinetic parameters of (GeS2)0.3(Sb2S3)0.7 crystallization using the IKP method

The isoconversional method suggested by Friedman and the invariant kinetic parameters method (IKP) were used in order to examine the kinetics of the nonisothermal crystallization of (GeS₂)_0.3(Sb₂S₃)_0.7. The objective of the paper is to show the usefulness of the IKP method both for determining the activation parameters as well as the model of the investigated process. It was shown that the kinetic triplet [(E, A, f(α), where E is the activation energy, A is the preexponential factor, and f(α) is the differential function of conversion], which results through the application of the IKP method, depends on the set of kinetic models considered. For different sets of kinetic models, proportional values of f(α) are obtained. A criterion for the selection of this set, the use of which lead to the true kinetic triplet corresponding to the analyzed process (E = 163.2 kJ mol^?1; A = 2.47 × 10¹² min^?1 and the Avrami‐Erofeev model, A_m, for m = 2.5–2.6 was suggested. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 309–315, 2004     

Inorganic Sol-Gel Preparation of Medium Sized Microparticles of Li2TiO3 from TiCl4 as Tritium Breeding Material for Fusion Reactors

Microspheres of Li₂TiO₃ were fabricated by a classical, inorganic sol-gel process from commercially available TiCl₄. Elaborated process consists of the following main steps: (1) dissolving of TiCl₄ in concentrated aqueous HCl and addition of LiOH; (2) formation of sol emulsion in 2-ethylhexanol-1 containing the surfactant SPAN-80 (EH); (3) gelation of emulsion drops by extraction of water with partially dehydrated EH; (4) impregnation of gel to Li:Ti molar ratio MR = 2; (5) thermal treatment at 1200°C in order to receive chloride free product. This temperature can be significantly lowered (to 750°C) by dechlorination starting solution TiCl₄ by chemical treatment of the with nitric acid to form of nitrate-stabilized titania sols. Tritium release from sol-gel made Li₂TiO₃ microspheres were found very close to that observed for other traditional materials, however for the first sample process starts slightly earlier.     

Wave processes in media with hysteretic nonlinearity: Part 2

Nonlinear processes caused by the propagation of low-frequency and high-frequency acoustic pulses in an unbounded medium and the propagation of continuous waves in a ring resonator are theoretically studied on the basis of two hysteretic equations of state for media with imperfect elasticity. The profiles and parameters of pulses, the resonance curve and the Q factor of the resonator, and the ratio of the nonlinear resonance frequency shift to the nonlinear damping decrement are determined. For nonlinear wave processes in such media, the distinctive features that allow one to choose an appropriate hysteretic equation of state for analytically describing the experimental data are revealed.     

Selectively protected galactose derivatives for the synthesis of branched oligosaccharides

Synthesis and characterization of several new anomerically pure galactose derivatives, based on simple and effective protective group manipulations of benzyl β-d-galactopyranoside, are reported. The monosaccharides described contain selectively protected/deprotected hydroxyl functionalities at their 1,2,3,4- and 6-positions rendering them useful as building blocks for construction of branched oligosaccharides.     

Dynamics of the surface layer in cyanobiphenyl-aerosil nanocomposites with a high silica density

Composites were prepared from an aerosil and 4-n-alkyl-4'cyanobiphenyls with five to eight carbon atoms in the alkyl chain. Their high silica density of ∼7 g aerosil in 1 cm³ of liquid crystal (LC) allows the observation of the behaviour of a thin cyanobiphenyl layer (having nearly a monolayer structure) on the silica particles. The systems are investigated by dielectric spectroscopy (10^-2-10⁹ Hz) in a large temperature range (220-370 K). All the composites show a (main) relaxation process at frequencies much lower than the processes observed for the bulk LC that was assigned to the dynamics of the molecules in the surface layer. The temperature dependence of its characteristic frequencies obeys the Vogel-Fulcher-Tammann law, which is found to be typical for glass-forming liquids. The quasi two-dimensional character of the glass transition in the surface layer is discussed for the first time. At the nematic-to-isotropic transition temperature of the bulk, the composites show a continuous decrease of the characteristic frequencies as a function of the alkyl chain length, while the bulk LCs show the well known odd-even behaviour. The magnitude and temperature dependence of the slow relaxation process in the composites (molecules on an outer surface) agree with those of the same molecules confined to the nanopores of molecular sieves (internal surface).