The potential of tetrandrine as a protective agent for ischemic stroke

Stroke is one of the leading causes of mortality, with a high incidence of severe morbidity in survivors. The treatment to minimize tissue injury after stroke is still unsatisfactory and it is mandatory to develop effective treatment strategies for stroke. The pathophysiology of ischemic stroke is complex and involves many processes including energy failure, loss of ion homeostasis, increased intracellular calcium level, platelet aggregation, production of reactive oxygen species, disruption of blood brain barrier, and inflammation and leukocyte infiltration, etc. Tetrandrine, a bisbenzylisoquinoline alkaloid, has many pharmacologic effects including anti-inflammatory and cytoprotective effects. In addition, tetrandrine has been found to protect the liver, heart, small bowel and brain from ischemia/reperfusion injury. It is a calcium channel blocker, and can inhibit lipid peroxidation, reduce generation of reactive oxygen species, suppress the production of cytokines and inflammatory mediators, inhibit neutrophil recruitment and platelet aggregation, which are all devastating factors during ischemia/reperfusion injury of the brain. Because tetrandrine can counteract these important pathophysiological processes of ischemic stroke, it has the potential to be a protective agent for ischemic stroke.     

Photoisomerization and photodissociation of aniline and 4-methylpyridine

Photoisomerization and photodissociation of aniline and 4-methylpyridine at 193 nm were studied separately using multimass ion imaging techniques. Photofragment translational energy distributions and dissociation rates were measured. Our results demonstrate that more than 23% of the ground electronic state aniline and 10% of 4-methylpyridine produced from the excitation by 193 nm photons after internal conversion isomerize to seven-membered ring isomers, followed by the H atom migration in the seven-membered ring, and then rearomatize to both methylpyridine and aniline prior to dissociation. The significance of this isomerization is that the carbon, nitrogen, and hydrogen atoms belonging to the alkyl or amino groups are involved in the exchange with those atoms in the aromatic ring during the isomerization.     

Thermal hazard evaluation of carbon nanotubes with sulfuric acid by DSC

Many concerns over unsafe or unknown properties of multi-walled carbon nanotubes (MWNTs) have been raised. The thermal characteristics regarding stability would represent potential hazards during the production or utilization stage and could be determined by calorimetric tests for various thermokinetic parameters. Differential scanning calorimetry (DSC) was employed to evaluate the thermokinetic parameters for MWNTs at various compositions. Thermoanalytical curves showed that the average heat of decomposition (ΔH _d) of the MWNTs samples in a manufacturing process was about 31,723 J g⁻¹, by identifying them as an inherently hazardous material. In this study, significant thermal analysis appeared in the presence of sulfuric acid (H₂SO₄). From the DSC experiments, the purification process of MWNTs could induce an unexpected reaction in the condition of batch addition with reactants of H₂SO₄. The results can be applied for designing emergency relief system and emergency rescue strategies during a perturbed situation or accident.     

A Supramolecular Approach for Preparation of Size‐Controlled Nanoparticles

A supramolecular approach has been developed for the preparation of supramolecular nanoparticles (SNPs) with variable sizes (30–450 nm) from three different molecular building blocks using a cyclodextrin/adamantane recognition system. Positron emission tomography (PET) was employed to study the biodistribution and lymph node drainage of the SNPs in mice. The sizes of the SNPs affect their in vivo characteristics (see picture).

     

Hard nanocomposite comprising stereoregular syndiotactic polypropylene with chemically bonded gold nanoparticles

An effective method to synthesize directly a hard composite material containing uniformly dispersed nanogold particles chemically bonded with a stereospecific, crystalline polymer matrix has been developed. Syndiotactic polypropylene was synthesized and functionalized to have a hydroxyl terminal group (sPP_OH) via a metallocene catalysis with a selective chain transfer. Next, sPP_OH was activated to react with ethylene sulfide forming the thiol‐terminated polymer, sPP_SH. sPP_SH was then chemically bonded to gold nanoparticles (AuNPs) formed in situ via a reduction of HAuCl₄. The bonding between thiol and AuNP stabilized the AuNPs and led to the formation of sPP_AuNPs composite containing uniformly‐dispersed AuNPs of a 19–40 nm size without noticeable aggregation. Furthermore, the chemical bonding of AuNPs has afforded sPP_AuNPs a thermal degradation temperature (T_D) 49.4 °C higher than the pristine sPP or sPP_OH and 25.7 °C higher than sPP_SH without any adverse effect on the crystalline temperature and melting temperature. In addition, the characteristic UV‐Vis absorption wavelength of sPP_AuNPs remains the same at various temperatures, thus indicating the independence of optical property on temperature as well as the good thermal stability of the sPP_AuNPs composite. ¹H NMR, ¹³C NMR, FESEM, STEM, XPS, TGA and DSC were used to investigate the molecular structure, morphology and thermal properties of the resulting sPP_AuNPs nanocomposite. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Dipole Field Guided Orientated Attachment of Nanocrystals to Twin‐Brush ZnO Mesocrystals

Mesocrystals of ZnO were synthesized hydrothermally by using gum arabic as a structure‐directing agent. Their hierarchical structure has a unique twin‐brush form consisting of vertically aligned nanorods in a single‐crystal‐like porous form. The formation mechanism of the twin‐brush ZnO was investigated by quenching a series of samples at different times and examining them by TEM, SEM, and XRD. The alignment of ZnO crystal units can be modulated by adding simple salts such as KCl to change the units from nanorods to nanoplates. This can be explained by screening the dipolar force of the polar crystal. Local cathodoluminescence of twin‐brush ZnO was used to follow the local structure changes.     

Effect of ionic strength, pH and polymer concentration on the separation of DNA fragments in the presence of electroosmotic flow

DNA separations in the presence of electroosmotic flow (EOF) using poly(ethylene oxide) (PEO) solutions have been demonstrated. During the separations, PEO entered capillaries filled with Tris-borate (TB) free buffers by EOF and acted as sieving matrices. We have found that ionic strength and pH of polymer and free solutions affect the bulk EOF and resolution differently from that in capillary zone electrophoresis. The EOF coefficient increases with increasing ionic strength of the free TB buffers as a result of decreases in the adsorption of PEO molecules. In contrast, the bulk EOF decreases with increasing the ionic strength of polymer solutions using capillaries filled with high concentrations of free TB buffers. Although resolution values are high due to larger differential migration times between any two DNA fragments in a small bulk EOF using 10 mM TB buffers, use of a capillary filled with at least 100 mM TB free buffers is suggested for high-speed separations. On the side of PEO solutions, 1.5% PEO solutions prepared in 100 to 200 mM TB buffers are more proper in terms of resolution and speed. The separation of DNA markers V and VI was accomplished less than 29 min in 1.5% PEO solutions prepared in 100 mM TB buffers, pH 7.0 at 500 V/cm using a capillary filled with 10 mM free TB buffers, pH 7.0.     

Automated,continuous, and dynamic speciation of urinary arsenic in the bladder of living organisms using microdialysis sampling coupled on-line with high performance liquid chromatography and hydride generation atomic absorption spectrometry

An on-line and fully automated method was developed for the continuous and dynamic in vivo monitoring of four arsenic species [arsenite (AsIII), arsenate (AsV), monomethylarsonic acid (MMA) and dimethylarsinic acid (DMA)] in urine of living organisms. In this method a microdialysis sampling technique was employed to couple on-line with high performance liquid chromatography (HPLC) and hydride generation atomic absorption spectrometry (HGAAS). Dialysates perfused through implanted microdialysis probes were collected with a sample loop of an on-line injector for direct and automated injection into HPLC system hyphenated with HGAAS. The saline (0.9% NaCl) solution was perfused at the rate of 1 microl min(-1) through the microdialysis probe and the dialysate was loaded into 50 microl of sample loop. The separation conditions were optimally selected to be in phosphate buffer solution at a pH 5.2 with a flow rate of 1.2 ml min(-1). The effluent from the HPLC was first mixed on-line at the exit of the column with HCl (1 M) solution and then mixed with a NaBH4 (0.2% m/v) solution. Based on the optimal conditions obtained, linear ranges of 2.5-50 ng ml(-1) for AsIII and 6.75-100 ng ml(-1) for the other three arsenic species were obtained. Detection limits of 1.00, 2.18, 1.03 and 2.17 ng ml(-1) were obtained for AsIII, DMA, MMA and AsV, respectively. Typical precision values of 3.4% (AsIII), 5.4% (DMA), 3.6% (MMA) and 7.5% (AsV) were obtained, respectively, at a 25 ng ml(-1) level. Recoveries close to 100%, relative to an aqueous standard, were observed for each species. The average in vivo recoveries of AsIII, DMA, MMA and AsV in rat bladder urine were 56+/-5%, 60+/-9%, 49+/-3% and 55+/-7%, respectively. The use of an on-line microdialysis-HPLC-HGAAS system permitted the determination of four urinary arsenic species in the bladder of an anesthetized rat with a temporal resolution of 50 min sampling.     

Photoinduced electron transfer in a triad that can be assembled/disassembled by two different external inputs. Toward molecular-level electrical extension cables

We have designed, synthesized, and investigated a self-assembling supramolecular system which mimics, at a molecular level, the function performed by a macroscopic electrical extension cable. The system is made up of three components, 12+, 2-H3+, and 3. Component 12+ consists of two moieties: a [Ru(bpy)3]2+ unit, which plays the role of an electron donor under light excitation, and a DB24C8 crown ether, which fulfills the function of a socket. The wire-type component 2-H3+ is also composed of two moieties, a secondary dialkylammonium-ion center and a bipyridinium unit, which thread into the DB24C8 crown-ether socket of 12+ and the 1/5DN38C10 crown-ether socket 3, respectively. The photochemical, photophysical, and electrochemical properties of the three separated components, of the 12+ superset 2-H3+ and 2-H3+ subset 3 dyads, and of the 12+ superset 2-H3+ subset 3 triad have been investigated in CH2Cl2 solution containing 2% MeCN. Reversible connection/disconnection of the two plug/socket systems can be controlled independently by acid/base and redox stimulation. The behavior of the various different dyads and triad has been monitored by light absorption and emission spectroscopies, as well as by electrochemical techniques. In the fully connected 12+ superset 2-H3+ subset 3 triad, light excitation of the [Ru(bpy)3]2+ unit of component 12+ is followed by electron transfer (k = 2.8 x 108 s-1) to the bipyridinium unit of component 2-H3+, which is plugged into component 3. Possible schemes to obtain improved molecular-level electrical extension cables are discussed.     

Controllable donor-acceptor neutral [2]rotaxanes

In pursuit of a neutral bistable [2]rotaxane made up of two tetraarylmethane stoppers--both carrying one isopropyl and two tert-butyl groups located at the para positions on each of three of the four aryl rings--known to permit the slippage of the pi-electron-donating 1,5-dinaphtho[38]crown-10 (1/5DNP38C10) at the thermodynamic instigation of pi-electron-accepting recognition sites, in this case, pyromellitic diimide (PmI) and 1,4,5,8-naphthalenetetracarboxylate diimide (NpI) units separated from each other along the rod section of the rotaxane's dumbbell component, and from the para positions of the fourth aryl group of the two stoppers by pentamethylene chains, a modular approach was employed in the synthesis of the dumbbell-shaped compound NpPmD, as well as of its two degenerate counterparts, one (PmPmD) which contains two PmI units and the other (NpNpD) which contains two NpI units. The bistable [2]rotaxane NpPmR, as well as its two degenerate analogues PmPmR and NpNpR, were obtained from the corresponding dumbbell-shaped compounds NpPmD, PmPmD, and NpNpD and 1/5DNP38C10 by slippage. Dynamic 1H NMR spectroscopy in CD2Cl2 revealed that shuttling of the 1/5DNP38C10 ring occurs in NpNpR and PmPmR, with activation barriers of 277 K of 14.0 and 10.9 kcal mol(-1), respectively, reflecting a much more pronounced donor-acceptor stabilizing interaction involving the NpI units over the PmI ones. The photophysical and electrochemical properties of the three neutral [2]rotaxanes and their dumbbell-shaped precursors have also been investigated in CH2Cl2. Interactions between 1/5DNP38C10 and PmI and NpI units located within the rod section of the dumbbell components of the [2]rotaxane give rise to the appearance of charge-transfer bands, the energies of which correlate with the electron-accepting properties of the two diimide moieties. Comparison between the positions of the visible absorption bands in the three [2]rotaxanes shows that, in NpPmR, the major translational isomer is the one in which 1/5DNP38C10 encircles the NpI unit. Correlations of the reduction potentials for all the compounds studied confirm that, in this non-degenerate [2]rotaxane, one of the translational isomers predominates. Furthermore, after deactivation of the NpI unit by one-electron reduction, the 1/5DNP38C10 macrocycle moves to the PmI unit. Li+ ions have been found to strengthen the interaction between the electron-donating crown ether and the electron-accepting diimide units, particularly the PmI one. Titration experiments show that two Li+ ions are involved in the strengthening of the donor-acceptor interaction. Addition of Li+ ions to NpPmR induces the 1/5DNP38C10 macrocycle to move from the NpI to the PmI unit. The Li+-ion-promoted switching of NpPmR in a 4:1 mixture of CD2Cl2 and CD3COCD3 has also been shown by 1H NMR spectroscopy to involve the mechanical movement of the 1/5DNP38C10 macrocycle from the NpI to the PmI unit, a process that can be reversed by adding an excess of [12]crown-4 to sequester the Li+ ions.