Hydrodynamic voltammetry at an interdigitated electrode array in a flow channel: Part I. Numerical simulation

This paper describes the numerical simulation of convective diffusion at an interdigitated electrode array, consisting of multiple pairs of microelectrodes held at alternating applied potentials on one wall of a flow channel. The downstream microelectrode of each pair detects species generated at the upstream microelectrode. Concentration profiles in the channel, amperometric response, and signal-to-noise ratios for the detector electrodes are calculated. The simple backward implicit finite difference (BIFD) simulation approach is applicable for a wide range of channel conditions. The upper number of electrode pairs treatable is limited only by computational time. The agreement of the simulation with previous results for a single pair of electrodes under comparable conditions is very good. Substantial improvements in signal-to-noise ratio are predicted for the multi-electrode interdigitated electrode array relative to a single generator-detector pair of equal overall area. Electrode dimensions are discussed for optimum signal/noise ratio. Relative enhancement increases significantly with the number of generator-detector pairs.     

Localized oscillators and heat conduction in clathrate hydrates

The glassy behaviour of the thermal conductivities of structure I xenon and structure II hydrate at high temperature are found to be described surprisingly well by a localized oscillator model. This observation leads to the suggestion of strong coupling between the localized vibrations of the guest with the lattice acoustic phonons. This conjecture is confirmed by a phenomenological calculation using the Anderson-Fano resonant scattering model.Published as NRCC 37248.     

参数共振微扰法在Boost变换器混沌控制中的实现及其优化

参数共振微扰法是一种简单的非反馈混沌控制方法，它十分适合非自治系统的混沌控制.研究了这种方法在电流模式控制Boost变换器混沌控制中的应用，并通过对扰动相位进行优化 ，达到最优的混沌控制结果.同时对参数共振微扰法及其优化方法在Boost变换器混沌控制中的作用进行了理论分析，推导并计算了各种电路参数变化对有效的混沌控制所需的扰动的影响. 关键词： Boost变换器 混沌 混沌控制 参数共振微扰法     

Diastereoselective Synthesis, Spectroscopy, and Electrochemistry of Ruthenium(II) Complexes of Substituted Pyrazolylpyridine Ligands

We report the synthesis of the hetero- and homoleptic ruthenium(II) complexes Ru(bpy)(2)L(2+), Ru(bpy)L(2)(2+) (bpy is 2,2'-bipyridine), and RuL(3)(2+) of six new bidentates L, the substituted pyrazolylpyridines 1-6 (1-substituted-3-(2-pyridinyl)-4,5,6,7-tetrahydroindazoles with substituents R = H, CH(3), Ph, or C(6)H(4)-4"-COOX where X = H, CH(3), or C(2)H(5)). These were fully characterized by (1)H- and (13)C-NMR spectroscopy and elemental analysis. The UV-visible spectra and redox properties of the complexes, some in the ruthenium(III) and reduced bipyridine oxidation states, are also discussed. The substituents R played a role in determining the stereochemistry of the Ru(bpy)L(2)(2+) and RuL(3)(2+) products. The reaction of Ru(DMSO)(4)Cl(2) with 3 equiv of L bearing aromatic substituents gave only meridional RuL(3)(2+) isomers. The one-step reaction of Ru(bpy)Cl(3).H(2)O with 2 equiv of L provided a mixture of the three possible Ru(bpy)L(2)(2+) isomers, from which one symmetric isomer (labeled beta) was isolated pure. A trans arrangement of the pyrazole groups was deduced by (1)H-NMR and confirmed by X-ray crystallography for one such stereomer (beta-[Ru(bpy)(5)(2)](PF(6))(2), R = C(6)H(4)-4"-COOC(2)H(5)). In contrast, Ru(DMSO)(4)Cl(2) reacted with 2 equiv of L and then 1 equiv of bpy to selectively form the other symmetric isomer (labeled alpha) where the pyridine groups of L are trans. Crystal data for beta-[Ru(bpy)(5)(2)](PF(6))(2) (C(52)H(50)N(8)O(4)F(12)P(2)Ru) with Mo Kalpha (lambda = 0.710 73 ?) radiation at 295 K: a = 28.442(13) ?, b = 18.469(15) ?, c = 23.785(9) ?, beta = 116.76(0) degrees, monoclinic, space group C2/c, Z = 8. Fully anisotropic (except for H and disordered F atoms), full-matrix, weighted least-squares refinement on F(2) gave a weighted R on F(2) of 0.2573 corresponding to R on F of 0.1031 for data where F > 4sigma(F ).     

Structural refinement of the high-pressure phase of aluminum trihydroxide: in-situ high-pressure angle dispersive synchrotron X-ray diffraction and theoretical studies

In-situ high-pressure synchrotron angle-dispersive X-ray diffraction for gibbsite (aluminum trihydroxide) was performed at room temperature up to 20 GPa. A pressure-induced phase transition was observed at 2.6 GPa. The new high-pressure phase can be recovered at ambient pressure. Rietveld refinement shows that the new phase of Al(OH)(3) has an orthorhombic structure, spacegroup Pbca, and the lattice parameters at ambient condition are a = 868.57(5) pm, b = 505.21(4) pm, c = 949.54(6) pm, V = 416.67(6) x 10(6) pm(3) with Z = 8. The compressibility of gibbsite and the high-pressure polymorph was analyzed, and their bulk moduli were estimated as 49.8 +/- 1.8 and 81.0 +/- 5.2 GPa, respectively. First-principles calculations of the high-pressure phase were performed to determine the hydrogen positions and to confirm the structural stability of the new phase.     

High-throughput approaches to the quantitative analysis of ketoconazole, a potent inhibitor of cytochrome P450 3A4, in human plasma

Ketoconazole, an imidazole-piperazine compound, is an orally active antimycotic agent. In addition, ketoconazole is a specific inhibitor of cytochrome P450 3A4. As about 60% of oxidized drugs are biotransformed by this isoform, the potential effect of a concomitant administration of ketoconazole on drug disposition may be of interest during drug development. The present paper describes three different approaches (methods A, B, and C) to attain high-throughput sample preparation and analysis in the quantification of ketoconazole in human plasma. Method A consisted of acetonitrile precipitation in a 96-well plate, transfer of the supernatant via a Tomtec Quadra 96 Model 320, and subsequent injection onto a 50 x 4.6 mm (i.d.) Develosil Combi-RP-5 column (packed with C30 bonded silica particles). Method B consisted of an identical sample preparation to method A with the exception that a Michrom Magic Bullet(trade mark) column, 2.0 --> 0.50 mm (i.d., tapered bore) x25 mm length, was used. Lastly, in method C, a turbulent-flow chromatography (TurboFlow LC/APCI-MS/MS) module was used for the direct analysis of ketoconazole in human plasma. A Sciex API 3000 was used in methods A and B, while a Micromass Quattro LC was employed in method C. Based on the values obtained for the calibrator (standard) and quality control samples, all three protocols yielded satisfactory accuracy, precision, and reduced manual sample preparation time.     

Translation of DNA into synthetic N-acyloxazolidines

The translation of DNA into synthetic molecules enables their manipulation by powerful evolution-based methods previously available only to proteins and nucleic acids. The development of increasingly sophisticated DNA-templated small-molecule syntheses is crucial to broadening the scope of this approach. Here, we report the translation of DNA templates into monocyclic and bicyclic N-acyloxazolidines using multistep DNA-templated organic synthesis. Second-generation template architectures, used for the first time in a multistep DNA-templated synthesis, together with reactions and linker cleavage strategies not previously described in a DNA-templated format, were crucial to the successful translation. The products generated in this work represent the most complex small molecules to date synthesized in a DNA sequence-programmed manner and provide the basis for DNA-templated synthetic heterocycle libraries.     

Determination of terbinafine (Lamisil) in human hair by microbore liquid chromatography/tandem mass spectrometry

An analytical method for the determination of terbinafine (Lamisil(R)) in human hair was developed and validated. Human hair (10 mg) was hydrolyzed in 0.50 mL of 5.0 N sodium hydroxide for 1.5 h. The aqueous layer was extracted with 1.5 mL of n-hexane. The organic layer was separated and re-extracted with 0.20 mL of formic acid (12.5%)/2-propanol (85:15, v/v). The aqueous layer was separated and 0.010 mL of the aqueous extract was injected onto a reversed-phase microbore (50 x 1.0 mm i.d.) column for analysis by liquid chromatography/tandem mass spectrometry (LC/MS/MS). The instrument was equipped with an electrospray ionization (ESI) interface and operated in the positive ion mode of detection. Interday and intraday accuracy and precision were assessed from the relative recoveries of spiked samples analyzed on three different days. The method showed excellent specificity and ruggedness with a lower limit of quantitation of 10 ng/g (i.e., 10 ppb) using 10 mg of human hair.     

The coordination chemistry of simple phospholes. Complexes of rhenium,ruthenium, cobalt,rhodium and iridium chlorides and of some chlorocarbonyls of ruthenium and rhodium

The reactions of 1-phenylphosphole (PP), 3-methyl-1-phenylphosphole (mPP), 3,4-dimethyl-1-phenylphosphole (dPP) and, in certain instances, 1-n-butyl-3,4-dimethylphosphole (dBP) with some transition metal chlorides and some metal-Cl-CO systems are reported. These reactions show that simple phospholes in general unexpectedly behave much like ordinary tertiary phosphines and that, unlike the reactions with Ni(II), Pd(II) and Pt(II), the complexes formed are conventional in most respects. However, a few unusual reactions were observed. For example, mPP partially reduces Ru(III) to give a mixed-valent Ru(III)-Ru(II) complex while PP reduces Ir(III) to Ir(I). From infrared spectroscopic studies of the square-planar Rh(I) complexes L₂Rh(CO) Cl (L = phosphole), it appears that donor character decreases with decreasing substitution on the phosphole ring carbon atoms. Phosphorus-phenyl cleavage has been observed in reactions of 1-phenylphosphole with Rh-CO systems. The results are briefly discussed in relation to the behaviour of other phospholes in similar reactions and in the context of the electronic structure of phospholes.