Proton-ionizable crown compounds. 4. New macrocyclic polyether ligands containing a triazole subcyclic unit

A series of macrocyclic polyether (crown) ligands containing the proton-ionizable s-triazole subcyclic unit were prepared by reacting the 1-THP blocked 3,5-bis(chloromethyl)-1H-1,2,4-triazole with various oligoethylene glycols. The starting bis(chloromethyl)triazole is a vessicant and must be used with caution. Triazolo-18-crown-6 ( 5 ) formed stable complexes with barium, strontium, copper and benzylammonium cations but not with potassium or lithium. The crystal structure of 5 showed the triazole proton to be on nitrogen 3 which is outside the macroring cavity.     

Ab initio studies on Al(+)(H(2)O)(n), HAlOH(+)(H(2)O)(n-1), and the size-dependent H(2) elimination reaction

We report computational studies on Al(+)(H(2)O)(n), and HAlOH(+)(H(2)O)(n-1), n = 6-14, by the density functional theory based ab initio molecular dynamics method, employing a planewave basis set with pseudopotentials, and also by conventional methods with Gaussian basis sets. The mechanism for the intracluster H(2) elimination reaction is explored. First, a new size-dependent insertion reaction for the transformation of Al(+)(H(2)O)(n), into HAlOH(+)(H(2)O)(n-1) is discovered for n > or = 8. This is because of the presence of a fairly stable six-water-ring structure in Al(+)(H(2)O)(n) with 12 members, including the Al(+). This structure promotes acidic dissociation and, for n > or = 8, leads to the insertion reaction. Gaussian based BPW91 and MP2 calculations with 6-31G* and 6-31G** basis sets confirmed the existence of such structures and located the transition structures for the insertion reaction. The calculated transition barrier is 10.0 kcal/mol for n = 9 and 7.1 kcal/mol for n = 8 at the MP2/6-31G** level, with zero-point energy corrections. Second, the experimentally observed size-dependent H(2) elimination reaction is related to the conformation of HAlOH(+)(H(2)O)(n-1), instead of Al(+)(H(2)O)(n). As n increases from 6 to 14, the structure of the HAlOH(+)(H(2)O)(n-1) cluster changes into a caged structure, with the Al-H bond buried inside, and protons produced in acidic dissociation could then travel through the H(2)O network to the vicinity of the Al-H bond and react with the hydride H to produce H(2). The structural transformation is completed at n = 13, coincident approximately with the onset of the H(2) elimination reaction. From constrained ab initio MD simulations, we estimated the free energy barrier for the H(2) elimination reaction to be 0.7 eV (16 kcal/mol) at n = 13, 1.5 eV (35 kcal/mol) at n = 12, and 4.5 eV (100 kcal/mol) at n = 8. The existence of transition structures for the H(2) elimination has also been verified by ab initio calculations at the MP2/6-31G** level. Finally, the switch-off of the H(2) elimination for n > 24 is explored and attributed to the diffusion of protons through enlarged hydrogen bonded H(2)O networks, which reduces the probability of finding a proton near the Al-H bond.     

High-throughput semi-automated 96-well liquid/liquid extraction and liquid chromatography/mass spectrometric analysis of everolimus (RAD 001) and cyclosporin a (CsA) in whole blood

A semi-automated high-throughput liquid/liquid extraction (LLE) assay was developed for RAD001 and cyclosporin A (CsA) in human blood. After addition of internal standard and ammonium hydroxide, samples were extracted twice with methyl tert-butyl ether (MTBE). The organic extract was evaporated to dryness and reconstituted in mobile phase. Where possible, sample transfer and LLE steps were automated using a Tomtec Quadra 96 workstation. Samples were analyzed using ESI-LC/MS/MS employing the transitions of ([M + NH(4)](+) --> [M + H](+)) for CsA and ([M + NH(4)](+) --> [M + H-(CH(3)OH + H(2)O)](+)) for RAD001, under isocratic chromatographic conditions (75:25, (v/v), acetonitrile/20 mM ammonium acetate) with a run time of 3.6 min. A lower limit of quantitation (LLOQ) of 0.368 ng/mL and 5.23 ng/mL was achieved for RAD001 and CsA, respectively, using a sample volume of 0.3 mL for the analysis. The method was validated over a 3-day period and the resulting calibration curves had a correlation coefficient >0.99 over the concentration range 0.368 to 409 ng/mL and 5.24 to 1748 ng/mL for RAD001 and CsA, respectively. The inter-day coefficient of variation (CV) was less than 15% at the LLOQ for both compounds. The method was applied to the analysis of clinical samples. Under normal working conditions four 96-well plates could be extracted and LC/MS analysis completed in less than 28 h. A marked improvement in sample throughput efficiency was realized with this LLE method when compared to existing solid phase extraction (SPE) methods which deal with both RAD001 and CsA.     

Ritter Reaction of 1‐Aryl‐1‐Fluoro‐2‐Haloethanes

Fluorinated phenethyl bromides 1,2 , and 3 , prove to be totally inert under Ritter reaction conditions in the presence of either SnCl₄ or AgNO₃, due to the strong deactivation by the gem‐difluoro unit. Subjecting 2‐bromo‐1‐fluoro‐1‐phenylethane to SnCl₄ in MeCN at elevated temperatures led to formation of 2‐methyl‐4‐phenyl‐4,5‐dihydrooxazole.     

Lattice dynamics of solid hydrogen chloride

Lattice dynamics of solid hydrogen chloride is studied, assuming a rigid molecule, in the harmonic and pair potential (Lennard-Jones interaction) approximation between atoms with the inclusion of electrostatic interactions between point dipoles placed on atomic centres. The potential parameters for each of the different non-bonded atom pairs were obtained by means of an optimization routine to give a least-squares fit to observed zone centre (k = 0) frequencies, equilibrium conditions and lattice energy of the lattice.     

Total Synthesis of (+)‐β‐Himachalene

An enantioselective synthesis of (+)‐β‐himachalene ( 2 ) was accomplished starting from (1S,2R)‐1,2‐epoxy‐p‐menth‐8‐ene ( 3 ) in 15 or 16 steps with an overall yield of ca. 6% (Schemes 3, 5, and 6). Key transformations include an Ireland–Claisen rearrangement, a Corey oxidative cyclization, and a ring expansion.     

CIDEP studies of the photolysis of the lignin model compound α-guaiacoxylacetoveratrone: the role of triplet reactions in aqueous and hydroxylic solvents

Free radical reactions induced by the photolysis of the lignin model compound α-guaiacoxylacetoveratrone have been studied by conventional and time-resolved ESR spectroscopy. In the presence of efficient hydrogen donors such as aqueous and hydroxylic solvents the primary reaction involves photoreduction of the triplet phenacyl ether to form the ketyl radical followed by rapid cleavage to the phenacyl radical and guaiacol. Subsequent formation of polarized guaiacoxyl radicals is due to secondary photo-oxidation. The cleavage of the ketyl radical is retarded in basic media and accelerated in acetic acid. Minor reaction pathways involving excited singlets cannot be ruled out by the current CIDEP observations.     

Crystallographic Studies of Clathrate Hydrates. Part I

Low-temperature neutron and X-ray diffraction studies show the gas hydrates of oxygen and nitrogen to be structure II (Fd3m), as recently found also for the hydrates of the small argon and krypton molecules. New lattice parameters of three structure I and 14 structure II hydrates from powder X-ray diffraction at 170 K are reported. The thermal expansion coefficient of tetrahydrofuran hydrate was determined from X-ray diffraction at some 50 temperatures between 18 and 263 K and found to be three times as great as for ice near 100 K and 30% higher near 250 K. Lattice parameters qf 40 type II clathrate hydrates are compared at 0°C and found to lie within 0.10 Å of 17.30 Å.     

Intramolecular Nitrene Insertion into Saturated C−H-Bond-Mediated C−N Bond Cleavage of a Coordinated NHC Ligand

Ruthenium(II) complexes bearing a tridentate bis(N-heterocyclic carbene) ligand reacted with iminoiodanes (PhI=NR) resulting in the formation of isolable ruthenium(III)–amido intermediates, which underwent cleavage of a C−N bond of the tridentate ligand and formation of an N-substituted imine group. The Ru^III–amido intermediates have been characterized by ¹H NMR, UV/Vis, ESI-MS, and X-ray crystallography. DFT calculations were performed to provide insight into the reaction mechanism.