Anomalous surface enhanced molecular Raman scattering from inelastic tunneling spectroscopy junctions

Anomalously strong Raman spectra have been obtained from molecular monolayers adsorbed on the insulator in metal-insulator-metal tunnel junctions. We show unambiguously that Raman spectroscopy can readily detect molecular monolayers and consider the effects of surface roughness, the molecule-metal interface and the metal on our results.     

The effect of Reynolds number on a turbulent far-wake

The turbulent far-waked generated by a circular cylinder is investigated for two values (1350 and 4600) of the Reynolds number Re _θ (based on the free stream velocity and the momentum thickness). Two arrays of sixteen X-wires, eight in the (x,?y)-plane and eight in the (x,?z)-plane, are used to capture the main features of the large-scale motion in two orthogonal planes. Both the magnitude of the measured Reynolds stresses and the size of the two-point velocity and vorticity correlation contours increase with Reynolds number. The probability density function and spectra of the velocity signals also exhibit differences with Re _θ. A comparison of centerline turbulence intensities with those in the literature suggests that the Reynolds number dependence may disappear for Re _θ?5000.     

Morphology study of Nafion membranes prepared by solutions casting

The structures of Nafion membranes prepared by solutions casting from low aliphatic alcohols/water mixture solvents and N,N′‐dimethyl formamide (DMF) solvent were investigated using differential scanning calorimeter and small angle X‐ray scattering. The aggregation behavior of Nafion molecules in the casting solutions was also investigated using dynamic light scattering. We show that the morphology of membranes was strongly influenced by the conformations of Nafion molecules in the solutions. In aliphatic alcohol/water mixture solvents, which have a worse compatibility with Nafion backbones, the Nafion molecules aggregate and form fringed rod‐like structures. These primary rod‐like structures then aggregate again through fringed side chains to form secondary ionic aggregations. In DMF solvent, owing to its better compatibility with Nafion backbones, less Nafion molecules aggregate. The high degree of Nafion molecular aggregations in aliphatic alcohol/water mixture solvents leads to a high degree of hydrophobic and hydrophilic phase separation for membranes prepared by casting from Nafion/aliphatic alcohol/water solutions. However, the lower degree of molecular aggregations in DMF solvent results in a lower degree of hydrophobic and hydrophilic phase separation for membranes prepared by casting from Nafion/DMF solution. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3044–3057, 2005     

Solvent‐induced crystallization in poly(ethylene terephthalate) during mass transport

Solvent transport in poly(ethylene terephthalate) (PET) and related phase transformation were investigated. The data of mass sorption were analyzed according to Harmon's model for Case I (Fickian), Case II (swelling), and anomalous transport. This transport process in PET is accompanied by the induced crystallization of the original amorphous state. The transformation was examined by wide‐angle X‐ray scattering, small‐angle X‐ray scattering, differential scanning calorimetry, and Fourier transform infrared spectroscopy. During this process, the matrix is under a strain state that causes different kinetic paths of crystallization as compared with that by thermal annealing. This state of strain assists the development of the solvent‐induced crystallization. The model regarding crystallization was proposed in terms of the study of long period L, the crystal thickness l_c, and the thickness of amorphous layer l_a obtained from the one‐dimensional correlation function and interface distribution function. Different kinetic paths were discovered for different crystallization processes. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1444–1453, 2002     

Lamellar morphology and equilibrium melting temperature of syndiotactic polystyrene in β‐crystalline form

Lamellar morphology and thickness of syndiotactic polystyrene (sPS) samples melt‐crystallized at various temperatures were probed using transmission electron microscopy (TEM) and small‐angle X‐ray scattering (SAXS). In addition, the melting temperature and enthalpy of the crystallized samples were characterized with differential scanning calorimetry. Under appropriate thermal treatments, all the samples investigated in this study were crystallized into β′ crystal modification, as revealed by wide‐angle X‐ray diffraction. From the SAXS intensity profiles, a scattering peak (or shoulder) associated with lamellar features as well as the presence of anomalous scattering at the zero‐scattering vector were evidently observed. The peculiar zero‐angle scattering was successfully described by the Debye–Bueche model, and subtraction of its contribution from the raw intensity profiles was carried out to deduce the intensity profile merely associated with the lamellar feature. The lamellar thickness obtained from Lorentz‐corrected intensity profiles in this manner agrees with that measured from the TEM images, provided that the two‐phase model is applied. On the basis of the Gibbs–Thomson equation, the modest estimations of equilibrium melting temperature and the surface free energy of the fold lamellar surface are 292.7 ± 2.7 °C and 20.2 ± 2.6 erg/cm², respectively, when lamellar thicknesses measured by TEM are applied. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1626–1636, 2002     

Direct Activation of Nucleobases with Small Molecules for the Conditional Control of Antisense Function

Conditionally controlled antisense oligonucleotides provide precise interrogation of gene function at different developmental stages in animal models. Only one example of small molecule-induced activation of antisense function exist. This has been restricted to cyclic caged morpholinos that, based on sequence, can have significant background activity in the absence of the trigger. Here, we provide a new approach using azido-caged nucleobases that are site-specifically introduced into antisense morpholinos. The caging group design is a simple azidomethylene (Azm) group that, despite its very small size, efficiently blocks Watson–Crick base pairing in a programmable fashion. Furthermore, it undergoes facile decaging via Staudinger reduction when exposed to a small molecule phosphine, generating the native antisense oligonucleotide under conditions compatible with biological environments. We demonstrated small molecule-induced gene knockdown in mammalian cells, zebrafish embryos, and frog embryos. We validated the general applicability of this approach by targeting three different genes.     

Electrochemical oxidative rearrangement of tetrahydro-β-carbolines in a zero-gap flow cell

Oxidative rearrangement of tetrahydro-β-carbolines (THβCs) is one of the most efficient methods for the synthesis of biologically active spirooxindoles, including natural products and drug molecules. Here, we report the first electrochemical approach to achieve this important organic transformation in a flow cell. The key to the high efficiency was the use of a multifunctional LiBr electrolyte, where the bromide (Br⁻) ion acts as a mediator and catalyst and lithium ion (Li⁺) acts as a likely hydrophilic spectator, which might considerably reduce diffusion of THβCs into the double layer and thus prevent possible nonselective electrode oxidation of indoles. Additionally, we build a zero-gap flow cell to speed up mass transport and minimize concentration polarization, simultaneously achieving a high faradaic efficiency (FE) of 96% and an outstanding productivity of 0.144 mmol (h⁻¹ cm⁻²). This electrochemical method is demonstrated with twenty substrates, offering a general, green path towards bioactive spirooxindoles without using hazardous oxidants.

A zero-gap flow cell was designed for the first electro-oxidative rearrangement of tetrahydro-β-carbolines to spirooxindoles with high yield, faradaic efficiency and productivity when LiBr was discovered as a bi-functional mediator and catalyst.     

The unimolecular dissociation of 3,4-dihydro-2H-pyran over a wide temperature range

The thermal decomposition of 3,4-dihydro-2H-pyran (DHP, C₅H₈O) has been investigated by two methods: in shock waves with the laser-schlieren technique using mixtures of 5 and 10% DHP in krypton over 900–1500 K, 110–560 torr; in a flow tube having a reaction pressure 0.5 torr above atmospheric using the decomposition of allylethyl ether as an internal standard, and covering 663–773 K. The retro-Diels-Alder dissociation to the stable acrolein and ethylene is the dominant channel for all conditions. Precise rate constants (rms deviation of 10%) were obtained for this process over the indicated temperature ranges. Unimolecular falloff is evident in the shock-tube results, and RRKM calculations also predict a slight falloff at the lower temperatures. These RRKM calculations use a routine vibration model transition state and agree closely with the high-temperature data when 〈ΔE〉_down is a fixed 400 cm^?1. Arrhenius expressions for k_∞ derived from the two measurements are in close accord and also consistent with most previous studies of this reaction. © 1995 John Wiley & Sons, Inc.     

A least-squares finite element method for time-dependent incompressible flows with thermal convection

The time-dependent Navier–Stokes equations and the energy balance equation for an incompressible, constant property fluid in the Boussinesq approximation are solved by a least-squares finite element method based on a velocity–pressure–vorticity–temperature–heat-flux ( u –P–ω–T– q ) formulation discretized by backward finite differencing in time. The discretization scheme leads to the minimization of the residual in the l²-norm for each time step. Isoparametric bilinear quadrilateral elements and reduced integration are employed. Three examples, thermally driven cavity flow at Rayleigh numbers up to 10⁶, lid-driven cavity flow at Reynolds numbers up to 10⁴ and flow over a square obstacle at Reynolds number 200, are presented to validate the method.     

Isotopic compositions and scalings

We review experimental and theoretical studies devoted to extract information on the behaviour of the symmetry energy, in density regions different from the normal value, with charge-asymmetric reactions at Fermi energies. In particular, we focus on the analysis of fragmentation reactions and isotopic properties of the reaction products. Results concerning “isoscaling” properties and the N/Z equilibration among the reaction partners in semi-peripheral reactions are also discussed.