Studies on the thermotropic liquid crystalline polymer. VII. Synthesis and properties of photocrosslinkable poly(ether-ester) containing cinnamic group

A series of semi-aromatic poly(ether-ester)s containing cinnamic group was prepared from 4,4′-diacrylic acid-α,ω-phenoxyalkanes with diols in the presence of diphenylchlorophosphate (DPCP) and pyridine as a catalyst and solvent. The phase behavior of these polymers was studied by differential scanning calorimetry (DSC), optical polarizing microscopy equipped with a heating stage, and wide-angle x-ray diffraction (WAXD). All of the poly(ether-ester)s, except P3 , show nematic or smectic thermotropic liquid crystalline behaviour under optical polarizing microscopic observation. These polymers can undergo photocrosslinking reaction upon heating, as examined by IR, solubility, and DSC analysis. © 1993 John Wiley & Sons, Inc.     

Effect of the polarity of additional solvent on membrane formation in polysulfone/N-methyl-2-pyrrolidone/water ternary system

Asymmetric polysulfone membranes were prepared by wet phase inversion method with different demixing rate of casting solutions. The influent factor of demixing rate was focused on the polarity of additive in the polysulfone/N-methyl-2-pyrrolidone/water ternary system. With increasing the polarity of alcohols in the casting solution, the decrease in skin layer thickness was observed and then a poor separation performance of membranes can be obtained. It was found that the polar additive caused the rapidly demixing of casting solution in coagulation bath and formed porous asymmetric membranes with defective skin layer. In the other case, chloroform was used as the non-polar additive in casting solution. With increasing the mount of chloroform in the casting solution, the increase in skin layer thickness was observed and then lead to a good separation performance of these membranes. It was found that of the non-polar additive delays the demixing rate of casting solution in this ternary system. The separation performance of these asymmetric membranes were characterized by the measurement of dehydration of ethanol/water mixture by pervaporation and observed the morphology by scanning electron microscopy. It was found that the separation performance of asymmetric polysulfone membrane strongly depends on the polarity of adding solvent in polysulfone/N-methyl-2-pyrrolidone/water ternary system.     

Polarographic Behaviour and Determination of Stability Constants of Uranyl-Ascorbate Complex

The complex species of UO₂(HA)(H₂A)⁺ and UO₂(HA)₂ were identified in the ascorbic acid solution of uranyl ion at pH<2.1 and pH>2.1, respectively. Polarographic wave was proved to be the simultaneous reduction of UO₂⁺² and UO₂(HA)(H₂A)⁺ at pH <2.1. However, at pH>2.1, the wave is due to the reduction of U0₂(HA)₂ The stability constants of the two complex species were found to be 5.1×10⁺ and 1.0×10⁵, respectively. The hydrolysis constant of uranyl ion in the solution of ascorbic acid was determined.     

The Constituents of Cynanchum Taiwanianum

The isolation and identification of eleven crystalline components from the aerial part of Cynanchum taiwanianum Yamazaki (Asclepiadaceae) are described. Their structures were determined on the basis of spectral evidence and chemical transformation. Besides caffeic acid, β-amyrin, and methyl phaeophorbide a, the isolated flavonoid components are classified into two groups, i.e. kaempferol derivatives (kaempferol, astragalin, afzelin, trifolin) and quercetin derivatives (quercetin, isoquercitrin, quercitrin, hyperin).     

Kinetic and mechanistic studies of the copolymerization of bis-4-substituted-1,2,4-triazoline-3,5-diones with styrenes

Highly reactive 4-substituted-1,2,4-triazoline-3,5-diones (TDs) have been studied extensively as dienophiles, but little work has been done on their role as enophiles and particularly on their use as propagating species in polymerization studies. The copolymerization between bis-4-substituted-1,2,4-triazoline-3,5-diones (bis-TDs) and styrene has been reported. The purpose of the present work was to synthesize new copolymers derived from a variety of substituted styrenes and bis-TDs and to study the mechanism and kinetics of this novel polymerization. Three bis-TDs were prepared: 3,3′-dimethyl-4,4′-bis[3,5-dioxo-1,2,4-triazoline-4-yl] biphenyl (8), t-1,4-bis[3,5-dioxo-1,2,4-triazoline-4-yl] methyl cyclohexane (9), and 4,4′-bis[3,5-dioxo-1,2,4-triazoline-4-yl] phenyl ether (10). Their structures were fully established by spectroscopic studies, elemental analyses, and indirectly, their quantitative ene reactions with 2,3-dimethyl-2-butene. Copolymerization between bis-TDs and substituted styrenes was carried out in dimethylformamide (DMF), tetrahydrofuran (THF), or dichloroethane (DCE). Polymers formed were characterized by infrared (IR) and nuclear magnetic resonance (NMR) spectroscopy, differential scanning calorimetry (DSC), gel permeation chromatography (GPC), and viscometry. Molecular weights of polymers range from 5000 to 16,000 in most cases. They were stable up to 250°C and higher. Polymers derived from bis-TDs and p-t-butylstyrene, α-methylstyrene, p-nitrostyrene, and p-acetoxystyrene contained only Diels-Alder-ene (DAe) repeating units, whereas those derived from styrene, p-chlorostyrene, p-bromostyrene, p-methylstyrene, p-methoxystyrene, and 4-vinylbiphenyl contained both DAe and double Diels-Alder (dDA) repeating units. A kinetic study of the copolymerization of 4,4′-bis-(3,5-dioxo-1,2,4-triazoline-4-yl) phenyl ether with α-methylstyrene, p-t-butylstyrene, styrene, p-chlorostyrene, and p-nitrostyrene in DCE was carried out; the copolymerization rate constants were 60.9, 49.8, 8.4, 5.5, and 0.8 (1 mol^?1s), respectively.     

Comparison between the pervaporation and vapor permeation performances of polycarbonate membranes

The pervaporation and vapor permeation performance of symmetrical and asymmetrical polycarbonate membranes, prepared via a dry-phase inversion and wet-phase inversion methods, respectively, were studied by measuring the permeation rate and separation factor. It was found that the polymer concentration effect on the pervaporation performance for the symmetrical polycarbonate membrane was lower than that for the asymmetrical polycarbonate membrane. Compared with pervaporation, vapor permeation has a significantly increased separation factor with a decreased permeation rate for the symmetrical polycarbonate membrane. Water molecules preferentially dissolve into the symmetrical polycarbonate membrane and diffuse easily through the membrane.     

Transient electrophoresis of a charged porous particle

The starting electrophoretic motion of a porous, uniformly charged, spherical particle, which models a solvent-permeable and ion-penetrable polyelectrolyte coil or floc of nanoparticles, in an arbitrary electrolyte solution due to the sudden application of an electric field is studied for the first time. The unsteady Stokes/Brinkman equations with the electric force term governing the fluid velocity fields are solved by means of the Laplace transform. An analytical formula for the electrophoretic mobility of the porous sphere is obtained as a function of the dimensionless parameters , , , and , where a is the radius of the particle, κ is the Debye screening parameter, λ is the reciprocal of the square root of the fluid permeability in the particle, ρ_p and ρ are the mass densities of the particle and fluid, respectively, ν is the kinematic viscosity of the fluid, and t is the time. The electrophoretic mobility normalized by its steady-state value increases monotonically with increases in and , but decreases monotonically with an increase in , keeping the other parameters unchanged. In general, a porous particle with a high fluid permeability trails behind an identical porous particle with a lower permeability and a corresponding hard particle in the growth of the normalized electrophoretic mobility The normalized electrophoretic acceleration of the porous sphere decreases monotonically with an increase in the time and increases with an increase in from zero at .     

Aggregation-driven growth of size-tunable organic nanoparticles using electronically altered conjugated polymers

A novel class of monodisperse conjugated polymer nanoparticles have been readily prepared by the facile reprecipitation of poly{1,3-bis[2-(3-alkylthienyl)]azulene} or poly{1,3-bis[2-(3-alkoxythienyl)]azulene}. The multicomponent poly(bithiophene-alt-azulene) macromolecules were efficiently self-assembled into a wide range of size-tunable nanoparticles from a few tens to five hundred nanometers via the hydrophobic and pi-stacking effects in the mixed chloroform/methanol solutions. Electronically altered polymer structures with different alkyl or alkoxy substitutes exhibited variable self-assembling behaviors to precisely tune the size and the optical/electronic properties of nanoparticles. A strong size dependence of continuous bathochromic absorption and significant enhanced emission were observed with the increase of particle size. A linear relationship between the absorption or fluorescence intensities and the particle size was demonstrated as well, and this is very useful to probe the intermolecular interactions and the size evolutions of conjugated polymer nanoparticles. After the size-dependent optical and electronic properties are created, they can be further optimized to improve the performance of materials prior to the use in novel organic nanodevices in a cost-effective way.     

Reactions of RSe− (R = Me,Ph) Groups in [RSeFe(CO)4I and [RSeCr(CO)5−]

The anionic [MeSeFe(CO)₄] and [MeSeCr(CO)₅] complexes were synthesized by reaction of [PPN][HFe(CO)₄] and [PPN][HCr(CO)₅] with MeSeSeMe respectively via nucleophilic cleavage of the Se-Se bond. The ease of cleavage of the Se-Se bond follows the nucleophilic strength of metal-hydride complexes. Methylation of [RSeCr(CO)₅^?] by the soft alkylating agent MeI resulted in the formation of neutral (MeSeMe)Cr(CO)₅ in THF at 0°C. In contrast, the [ICr(CO)₅^?] was isolated at ambient temperature. Reaction of [MeSeFe(CO)₄^?] or [MeSeCr(CO)₅^?] with HBF₄ yielded (CO)₃Fc(μ-SeMe)₂Fe(CO)₃ dimer and anionic [(CO )₅Cr (μ-SeMe)Cr(CO)₅^?] respectively, and no neutral (HSeMe)Fe(CO)₄ and (HSeMe)Cr(CO)₅ were detected spectrally (IR) even at low temperature. Reaction of NOBF₄ or [Ph₃C][BF₄] and [MeSeCr(CO)₅^?] resulted in the neutral monodentate (MeSeSeMe)Cr(CO)₅ complex. Addition of 1 equiv CpFe(CO)₂I to 2 equiv [MeSeCr(CO)₅^?] gave CpFe(CO)₂(SeMe) and the anionic [(CO)₅Cr(μ-SeMe)Cr(CO)₅^?] in THF at ambient temperature.