Stochastic detection of motor protein-RNA complexes by single-channel current recording.

A label- and immobilization-free approach to detecting the reversible formation of complexes between nucleic acids and proteins at the single-molecule level is described. The voltage-driven translocation of individual oligoribonucleotides through a nanoscale protein pore is observed by single-channel current recordings. The oligoribonucleotide 5'-C25A(25)-3' gives rise to current blockades with an average duration of approximately 0.5 ms. In the presence of the RNA-binding ATPase P4, a viral packaging motor from bacteriophage phi8, longer events of tens to hundreds of milliseconds are observed. Upon addition of ATP the long events disappear, indicating the dissociation of the P4RNA complex. The frequency of events also depends on the concentration of P4 and the length of the oligoribonucleotide, thereby confirming the specificity of the P4RNA events. This study shows that single-channel current recordings can be used to monitor RNA-protein complex formation, thus opening up a new means to examine the motor activity of RNA- or DNA-processing enzymes.     

Dynamics and supramolecular organization of the 1D spin transition polymeric chain compound [Fe(NH2trz)3](NO3)2. Muon spin relaxation

The thermal spin transition that occurs in the polymeric chain compound [Fe(NH(2)trz)3](NO3)2 above room temperature has been investigated by zero-field muon spin relaxation (microSR) over the temperature range approximately 8-402 K. The depolarization curves are best described by a Lorentzian and a Gaussian line that represent fast and slow components, respectively. The spin transition is associated with a hysteresis loop of width DeltaT = 34 K (T1/2 upward arrow = 346 K and T1/2 downward arrow = 312 K) that has been delineated by the temperature variation of the initial asymmetry parameter, in good agreement with previously published magnetic measurements. Zero-field and applied field (20-2000 Oe) microSR measurements show the presence of diamagnetic muon species and paramagnetic muonium radical species (A = 753 +/- 77 MHz) over the entire temperature range. Fast dynamics have been revealed in the high-spin state of [Fe(NH(2)trz)3](NO3)2 with the presence of a Gaussian relaxation mode that is mostly due to the dipolar interaction with static nuclear moments. This situation, where the muonium radicals are totally decoupled and not able to sense paramagnetic fluctuations, implies that the high-spin dynamics fall outside the muon time scale. Insights to the origin of the cooperative effects associated with the spin transition of [Fe(NH(2)trz)3](NO3)2 through muon implantation are presented.     

Tetrathiafulvalene‐amido‐2‐pyridine‐N‐oxide as Efficient Charge‐Transfer Antenna Ligand for the Sensitization of YbIII Luminescence in a Series of Lanthanide Paramagnetic Coordination Complexes

The tetrathiafulvalene‐amido‐2‐pyridine‐N‐oxide ( L ) ligand has been employed to coordinate 4f elements. The architecture of the complexes mainly depends on the ionic radii of the lanthanides. Thus, the reaction of L in the same experimental protocol leads to three different molecular structure series. Binuclear [Ln₂(hfac)₅(O₂CPhCl)( L )₃] ? 2 H₂O (hfac^?=1,1,1,5,5,5‐hexafluoroacetylacetonate anion, O₂CPhCl^?=3‐chlorobenzoate anion) and mononuclear [Ln(hfac)₃( L )₂] complexes were obtained by using rare‐earth ions with either large (Ln^III=Pr, Gd) or small (Ln^III=Y, Yb) ionic radius, respectively, whereas the use of Tb^III that possesses an intermediate ionic radius led to the formation of a binuclear complex of formula [Tb₂(hfac)₄(O₂CPhCl)₂( L )₂]. Antiferromagnetic interactions have been observed in the three dinuclear compounds by using an extended empirical method. Photophysical properties of the coordination complexes have been studied by solid‐state absorption spectroscopy, whereas time‐dependent density functional theory (TD‐DFT) calculations have been carried out on the diamagnetic Y^III derivative to build a molecular orbital diagram and to reproduce the absorption spectrum. For the [Yb(hfac)₃( L )₂] complex, the excitation at 19 600 cm^?1 of the HOMO→LUMO+1/LUMO+2 charge‐transfer transition induces both line‐shape emissions in the near‐IR spectral range assigned to the ²F_5/2→²F_7/2 (9860 cm^?1) ytterbium‐centered transition and a residual charge‐transfer emission around 13 150 cm^?1. An efficient antenna effect that proceeds through energy transfer from the singlet excited state of the tetrathiafulvalene‐amido‐2‐pyridine‐N‐oxide chromophore is evidence of the Yb^III sensitization.     

Inverse problem approaches for stationary Fourier transform spectrometers

A design of a miniaturized stationary Fourier transform IR spectrometer has been developed that produces a two-dimensional interferogram. The latter is disturbed by effects like parasitic interferences or disparities in the cutoff wavelength of the pixels. Thus, a simple Fourier transform cannot be used to estimate the spectrum of the scene. However, as these defects are deterministic, they can be measured and taken into account by inversion methods. A regularization term can also be added. The first experimental results prove the efficiency of this processing methodology.     

Lateral Deprotometallation-Trapping Reactions on Methylated Pyridines,Quinolines and Quinoxalines Using Lithium Diethylamide

The functionalization of methylated azines and diazines has aroused the interest of chemists given the structural diversity that it affords. Hindered lithium dialkylamides have been used to deprotometallate these substrates chemoselectively. In contrast, it can be observed that, despite some promising work, lithium diethylamide has been used very little for this purpose. Our objective here is on the one hand to make an inventory of what reagents have been used to deprotometallate methylpyridines, -quinolines and -quinoxalines, and on the other hand to describe the results obtained by seeking to functionalize a series of substrates with lithium diethylamide (picolines, 2,4-lutidine, methylquinolines and 2-methylquinoxaline). Our efforts to take advantage of the use of an in-situ trap (a zinc chloride chelate) in these reactions are also described.     

Basic Substances,a Sustainable Tool to Complement and Eventually Replace Synthetic Pesticides in the Management of Pre and Postharvest Diseases: Reviewed Instructions for Users

Synthetic pesticides are widely used to protect crops from pathogens and pests, especially for fruits and vegetables, and this may lead to the presence of residues on fresh produce. Improving the sustainability of agriculture and, at the same time, reducing the adverse effects of synthetic pesticides on human health requires effective alternatives that improve the productivity while maintaining the food quality and safety. Moreover, retailers increasingly request fresh produce with the amounts of pesticides largely below the official maximum residue levels. Basic substances are relatively novel compounds that can be used in plant protection without neurotoxic or immune-toxic effects and are still poorly known by phytosanitary consultants (plant doctors), researchers, growers, consumers, and decision makers. The focus of this review is to provide updated information about 24 basic substances currently approved in the EU and to summarize in a single document their properties and instructions for users. Most of these substances have a fungicidal activity (calcium hydroxide, chitosan, chitosan hydrochloride, Equisetum arvense L., hydrogen peroxide, lecithins, cow milk, mustard seed powder, Salix spp., sunflower oil, sodium chloride, sodium hydrogen carbonate, Urtica spp., vinegar, and whey). Considering the increasing requests from consumers of fruits and vegetables for high quality with no or a reduced amount of pesticide residues, basic substances can complement and, at times, replace the application of synthetic pesticides with benefits for users and for consumers. Large-scale trials are important to design the best dosage and strategies for the application of basic substances against pathogens and pests in different growing environments and contexts.     

Effect of Metal Vapours on the Radiation Properties of Thermal Plasmas

In metallurgic applications of thermal plasmas the presence of metal vapour, even in small proportion tends to increase the electron number density and to modify some basic properties such as the electrical conductivity and the radiation emission. In this paper we focus on the influence of these vapours on the radiation properties. After the definition of some necessary and basic functions and laws we briefly present the mechanisms responsible for emission and absorption of radiation in thermal plasmas. Then an important section is devoted to the role of metal vapours on the net emission coefficient which is the most popular parameter used to evaluate the radiation power losses in general models. It is shown that metal vapours increase the emission especially at low and intermediate temperatures (T < 12,000 K) and that their relative influence depends on the nature of the initial gas and of the metal itself. We list a rather important number of references presenting calculation of net emission in various gas–metal mixtures. Finally we show in a last section the influence of metal radiation on general plasma properties such as the energy transfer (other methods than the net emission coefficient), the cooling effect, the global energy balance and the heating of particulates injected in the plasma. The most spectacular effects are the increase of radiation losses in the energy balance and the complex role of the metal in the local cooling of the plasma.     

Influence of the aspect ratio on boiling flows in rectangular mini-channels

This article presents experiments conducted with two single rectangular mini-channels of same hydraulic diameter (1.4 mm) and different aspect ratios for conditions of horizontal boiling flow. The Forane® 365 HX used was subcooled (ΔT_sub = 15 °C) for all the boiling curves presented in the paper. Local heat transfer coefficients were measured for heat flux ranging from 25 to 62 kW m⁻² and mass flux from 200 kg m⁻² s⁻¹ to 400 kg m⁻² s⁻¹. The boiling flows were observed with two different cameras (depending on the flow velocity) through a visualization window. The flow patterns in the two channels were compared for similar conditions. The results show that the boiling heat transfer coefficient and the pressure drop values are different for the two single mini-channels. For low heat flux condition, the channel with lowest aspect ratio (H/W = 0.143) has a higher heat transfer coefficient. On the other hand, for high heat flux condition, the opposite situation occurs, namely the heat transfer coefficient becomes higher for the channel with highest aspect ratio (H/W = 0.43). This is probably due to the earlier onset of dryout in the channel with lowest aspect ratio. For the two cases of heating, the pressure drop for the two-phase flow remains lower for the channel with lowest aspect ratio. These results show that the aspect ratio plays a substantial role for boiling flows in rectangular channels. As for single-phase flows, the heat transfer characteristics are significantly influenced (even though the hydraulic diameter remains the same) by this parameter.