New nickel(II) diimine complexes and the control of polyethylene microstructure by catalyst design

Starting from differently substituted boronic acids as versatile building block, new "ortho-aryl" alpha-diimine ligands a-h were synthesized in an easy, high-yielding route. Reaction of the complex precursor diacetylacetonato-nickel(II) with a trityl salt, like [CPh3] [B(C6F5)4] or [CPh3] [SbCl6], in the presence of the diimine ligands afford the monocationic, square planar complexes 2a-g in almost quantitative yields. Suitable crystals (2d',e,f,g) were submitted for X-ray diffraction analysis. A geometry model was developed to describe the orientation of ligand fragments around the nickel(II) center that influence the polymer microstructure. At elevated reaction temperature and pressure, and in the presence of hydrogen, 2a-e catalyze the homopolymerization of ethylene to give branched PE products ranging from HD- to LLD-PE grades. The polymerization results indicate the possibility of precise microstructure control depending on the particular complex substitution. Preliminary investigations on material density and mechanical behavior by uniaxial stretching until failure point toward new material properties that can result from the simple ethylene monomer by catalyst design.     

Iterative tandem catalysis of secondary diols and diesters to chiral polyesters

The well-known dynamic kinetic resolution of secondary alcohols and esters was extended to secondary diols and diesters to afford chiral polyesters. This process is an example of iterative tandem catalysis (ITC), a polymerization method where the concurrent action of two fundamentally different catalysts is required to achieve chain growth. In order to procure chiral polyesters of high enantiomeric excess value (ee) and good molecular weight, the catalysts employed need to be complementary and compatible during the polymerization reaction. We here show that Shvo's catalyst and Novozym 435 fulfil these requirements. The optimal polymerization conditions of 1,1'-(1,3-phenylene) diethanol (1,3-diol) and diisopropyl adipate required 2 mol% Shvo's catalyst and 12 mg Novozym 435 per mmol alcohol group in the presence of 0.5 M 2,4-dimethyl-3-pentanol as the hydrogen donor. With these conditions, chiral polyesters were obtained with peak molecular weights up to 15 kDa, an ee value up to 99% and with 1-3 % ketone end groups. Also with the structural isomer, 1,4-diol, a chiral polyester was obtained, albeit with lower molecular weight (8.3 kDa) and slightly lower ee (94%). Aliphatic secondary diols also resulted in enantio-enriched polymers but at most an ee of 46 % was obtained with molecular weights in the range of 3.3-3.7 kDa. This low ee originates from the intrinsic low enantioselectivity of Novozym 435 for this type of secondary aliphatic diols. The results presented here show that ITC can be applied to procure chiral polyesters with good molecular weight and high ee from optically inactive AA-BB type monomers.     

Copper(I) cyanide networks: synthesis, luminescence behavior and thermal analysis. Part 1. Diimine ligands

Metal-organic networks of CuCN with diimines (L) = pyrazine (Pyz), 2-aminopyrazine (PyzNH(2)), quinoxaline (Qox), phenazine (Phz), 4,4'-bipyridyl (Bpy), pyrimidine (Pym), 2-aminopyrimidine (PymNH(2)), 2,4-diaminopyrimidine (Pym(NH(2))(2)), 2,4,6-triaminopyrimidine (Pym(NH(2))(3)), quinazoline (Qnz), pyridazine (Pdz), and phthalazine (Ptz) were studied. Open reflux reactions produced complexes (CuCN)(2)(L) for L = Qox, Phz, Bpy, PymNH(2), Pym(NH(2))(2), Qnz, and Pdz and (CuCN)(3)(L) complexes for L = Pyz, PyzNH(2), Qox, Bpy, Pym(NH(2))(3), and Pdz. Also produced were (CuCN)(3)(Pyz)(2), (CuCN)(PyzNH(2)), (CuCN)7(Pym)(2), (CuCN)(5)(Qnz)(2) and (CuCN)(5)(Ptz)(2). X-ray structures are presented for (CuCN)(2)(Pdz), (CuCN)(2)(PymNH(2)), and (CuCN)(7)(Pym)(2). Hydrothermal reactions yielded additional X-ray structures of (CuCN)(2)(PyzNH(2)), (CuCN)(3)(Pym(NH(2))(2)), (CuCN)(4)(Qnz), a second (CuCN)(2)(Pdz) phase, (CuCN)(5)(Pdz)2, (CuCN)(2)(Ptz), and (CuCN)(7)(Ptz)2. Structural trends, including cuprophilic interactions and cyano-bridged Cu(2)(CN)(2) dimer formation, are discussed. Particularly short Cu...Cu interactions are noted for the novel 4- and 5-coordinate Cu(2)(CN)(2) dimers. Thermal analyses show that most of the complexes decompose with loss of L around 160-180 degrees C. Luminescence behavior is relatively weak in the products.     

31P solid-state nuclear magnetic resonance study of the sorption of phosphate onto gibbsite and kaolinite

Sorption of phosphate onto gibbsite (gamma-Al(OH)3) and kaolinite has been studied by both macroscopic and 31P solid-state NMR measurements. Together these measurements indicate that phosphate is sorbed by a combination of surface complexation and surface precipitation with the relative amounts of these phases depending on pH and phosphate concentration. At low pH and high phosphate concentrations sorption is dominated by the presence of both amorphous and crystalline precipitate phases. The similarity between the single-pulse and CP/MAS NMR spectra suggests that the precipitate phases form a thin layer on the surface of the particles in close contact with protons from surface hydroxyl groups or coordinated water molecules. While the crystalline phase is only evident on samples below pH 7, amorphous AlPO4 was found at all pH and phosphate concentrations studied. As pH was increased the fraction of phosphate sorbed as an inner-sphere complex increased, becoming the dominant surface species by pH 8. Comparison of sorption and NMR results suggests that the inner-sphere complexes form by monodentate coordination to singly coordinated Al-OH sites on the edges of the gibbsite and kaolinite crystals. Outer-sphere phosphate complexes, which are readily desorbed, are also present at high pH.     

Mean‐risk optimization of electricity portfolios

We present a mathematical model with stochastic input data for mean‐risk optimization of electricity portfolios containing several physical components and energy derivative products. The model is designed for the optimization horizon of one year in hourly discretization. The aim consists in maximizing the mean book value of the portfolio at the end of the optimization horizon and, at the same time, in minimizing the risk of the portfolio decisions. The risk is measured by the conditional value‐at‐risk and by some multiperiod extension of CVaR, respectively.We present numerical results for a large‐scale realistic problem adapted to a municipal power utility and study the effects of varying weighting of risk. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

The asymmetric single-impurity Anderson model – the modified perturbation theory

We investigate the single-impurity Anderson model by means of the recently introduced modified perturbation theory. This approximation scheme yields reasonable results away from the symmetric case. The agreement with exactly known results for the symmetric case is checked, and results for the non-symmetric case are presented. With decreasing conduction band occupation, the breakdown of the screening of the local moment is observed. In the crossover regime between Kondo limit and mixed-valence regime, an enhanced zero-temperature susceptibility is found.     

Phosphonodithioester–Amine Coupling as a Key Reaction Step for the Design of Cationic Amphiphiles Used for Gene Delivery

A convergent synthesis of cationic amphiphilic compounds is reported here with the use of the phosphonodithioester–amine coupling (PAC) reaction. This versatile reaction occurs at room temperature without any catalyst, allowing binding of the lipid moiety to a polar head group. This strategy is illustrated with the use of two lipid units featuring either two oleyl chains or two-branched saturated lipid chains. The final cationic amphiphiles were evaluated as carriers for plasmid DNA delivery in four cell lines (A549, Calu3, CFBE and 16HBE) and were compared to standards (BSV36 and KLN47). These new amphiphilic derivatives, which were formulated with DOPE or DOPE-cholesterol as helper lipids, feature high transfection efficacies when associated with DOPE. The highest transfection efficacies were observed in the four cell lines at low charge ratios (CR = 0.7, 1 or 2). At these CRs, no toxic effects were detected. Altogether, this new synthesis scheme using the PAC reaction opens up new possibilities for investigating the effects of lipid or polar head groups on transfection efficacies.     

Luminescent Solar Concentrators Based on Renewable Polyester Matrices

This study reports for the first time the use of bio‐based alternatives for PMMA as host matrix for luminescent solar concentrators (LSCs). Notably, two types of renewable polyesters were synthesized in varying molar ratios via a two‐step melt‐polycondensation reaction with dibutyl tin oxide as catalyst. The first is a homopolymer of diethyl 2,3:4,5‐di‐O‐methylene galactarate (GxMe) and isosorbide (IGPn), and the second is a random copolymer of GxMe with 1,3‐propanediol and dimethyl terephthalate (GTPn). The two polyesters were found to be optically transparent, totally amorphous with a T_g higher than 45 °C and temperature resistance comparable to PMMA. Lumogen Red (LR) and an aggregation‐induced emission (AIE) fluorophore, TPETPAFN, were utilized as fluorophores and the derived thin polymer films (25 μm) were found highly homogeneous, especially for those prepared from GTPn, possibly due to the presence of compatibilizing terephthalate units in the matrix composition and the higher molecular weight. The spectroscopic characterization and the optical efficiency determination (η_opt) evidenced LSCs performances similar or superior to those collected from LR/PMMA thin films. Noteworthy, η_opt of 7.7 % and 7.1 % were recorded for the GTPn‐based matrix containing LR and TPETPAFN, respectively, thus definitely supporting the bio‐based polyesters as renewable and highly fluorophore‐compatible matrices for high‐performance LSCs.     

Image Denoising via Residual Kurtosis Minimization

A new algorithm for the removal of additive uncorrelated Gaussian noise from a digital image is presented. The algorithm is based on a data driven methodology for the adaptive thresholding of wavelet coefficients. This methodology is derived from higher order statistics of the residual image, and requires no a priori estimate of the level of noise contamination of an image.