Long-range magnetic order in Li<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Na<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Cu<Subscript>2</Subscript>O<Subscript>2</Subscript>

Single crystals of Li _x Na_{1 ? x} Cu₂O₂ solid solutions have been grown from the melt and crystal lattice parameters have been studied. It is found that the solid solution of this system exists in the region x ≤ 0.25. Specific heat and magnetic susceptibility are investigated on monocrystalline samples with x = 0.07, 0.14, and 0.21. Long-range magnetic order in these compounds is formed at T = 13.8, 4.1, and 14.8 K, respectively. It is found that the Néel temperature T _N in these compounds increases with Li content.     

Magnetic and thermal properties of single-crystal NdFe<Subscript>3</Subscript>(BO<Subscript>3</Subscript>)<Subscript>4</Subscript>

The neodymium ferroborate NdFe₃(BO₃)₄ undergoes an antiferromagnetic transition at T _N = 30 K, which manifests itself as a λ-type anomaly in the temperature dependence of the specific heat C and as inflection points in the temperature dependences of the magnetic susceptibility χ measured at various directions of an applied magnetic field with respect to the crystallographic axes of the sample. Magnetic ordering occurs only in the subsystem of Fe³⁺ ions, whereas the subsystem of Nd³⁺ ions remains polarized by the magnetic field of the iron subsystem. A change in the population of the levels of the ground Kramers doublet of neodymium ions manifests itself as Schottky-type anomalies in the C(T) and χ(T) dependences at low temperatures. At low temperatures, the magnetic properties of single-crystal NdFe₃(BO₃)₄ are substantially anisotropic, which is determined by the anisotropic contribution of the rare-earth subsystem to the magnetization. The experimental data obtained are used to propose a model for the magnetic structure of NdFe₃(BO₃)₄.     

Narrow-line phase-locked quantum cascade laser in the 9.2 microm range

We report the operation of a 50 mW continuous-wave quantum cascade laser (QCL) in the 9.2 microm range, phase locked to a single-mode CO(2) laser with a tunable frequency offset. The wide free-running emission spectrum of the QCL (3-5 MHz) is strongly narrowed down to the kilohertz range, making it suitable for high-resolution molecular spectroscopy.     

Polycyclic heteroaromatics via hydrazine-catalyzed ring-closing carbonyl–olefin metathesis

The use of hydrazine-catalyzed ring-closing carbonyl–olefin metathesis (RCCOM) to synthesize polycyclic heteroaromatic (PHA) compounds is described. In particular, substrates bearing Lewis basic functionalities such as pyridine rings and amines, which strongly inhibit acid catalyzed RCCOM reactions, are shown to be compatible with this reaction. Using 5 mol% catalyst loadings, a variety of PHA structures can be synthesized from biaryl alkenyl aldehydes, which themselves are readily prepared by cross-coupling.

Hydrazine catalysis enables the ring-closing carbonyl–olefin metathesis (RCCOM) to form polycyclic heteroaromatics, especially those with basic functionality.

Polycyclic heteroaromatic (PHA) structures comprise the core framework of many valuable compounds with a diverse range of applications (Fig. 1A).¹ For example, polycyclic azines (e.g. quinolines) are embedded in many alkaloid natural products, including diplamine² and eupolauramine³ to name just a few. These types of structures are also of interest for their biological activity, such as with the inhibitor of the Src-SH3 protein–protein interaction shown in Fig. 1A.⁴ Many nitrogenous PHAs are also useful as ligands for transition metal catalysis, as exemplified by the widely used ligand 1,10-phenanthroline.⁵ Meanwhile, chalcogenoarenes⁶ such as dinaphthofuran⁷ and benzodithiophene⁸ have attracted high interest for both their medicinal properties⁹ and especially for their potential use as organic light-emitting diodes (OLEDs), organic photovoltaics (OPVs), and organic field-effect transistors (OFETs).¹⁰ These and numerous other examples have inspired the development of a wide variety of strategies to construct PHAs.^1,11–14 Although these approaches are as varied as the structures they target, the wide range of molecular configurations within PHA chemical space and the challenges inherent in exerting control over heteroatom position and global structure make novel syntheses of these structures a topic of continuing interest.Open in a separate windowFig. 1(A) Examples of PHAs. (B) RCCOM strategy for PHA synthesis. (C) Lewis base inhibition for Lewis acid vs. hydrazine catalyzed RCCOM. (D) Hydrazine-catalyzed RCCOM for PHA synthesis.One potentially advantageous strategy for PHA synthesis is the use of ring-closing carbonyl–olefin metathesis¹⁵ (RCCOM) to forge one of the PHA rings, starting from a suitably disposed alkenyl aldehyde precursor 2 that can be easily assembled by cross-coupling (Fig. 1B). In related work, the application of RCCOM to form polycyclic aromatic hydrocarbons (PAHs) was reported by Schindler in 2017.¹⁶ In this case, 5 mol% FeCl₃ catalyzed the metathesis of substrates to form phenanthrenes and related compounds in high yields at room temperature. This method was highly attractive for its efficiency, its use of an earth-abundant metal catalyst, and the production of benign acetone as the only by-product. Nevertheless, one obvious drawback to the use of Lewis acid activation is that the presence of any functionality that is significantly more Lewis basic than the carbonyl group can be expected to strongly inhibit these reactions (Fig. 1C). Such a limitation thus renders this method incompatible with a wide swath of complex molecules, especially PHAs comprised of azine rings. This logic argues for a mechanistically orthogonal RCCOM approach that allows for the synthesis of PHA products with a broader range of ring systems and functional groups.We have developed an alternative approach to catalytic carbonyl–olefin metathesis that makes use of the condensation of 1,2-dialkylhydrazines 5 with aldehydes to form hydrazonium ions 6 as the key catalyst–substrate association step.^17–19 This interaction has a much broader chemoorthogonality profile than Lewis acid–base interactions and should thus be much less prone to substrate inhibition than acid-catalyzed approaches. In this Communication, we demonstrate that hydrazine-catalyzed RCCOM enables the rapid assembly of PHAs bearing basic functionality (Fig. 1D).For our optimization studies, we chose biaryl pyridine aldehyde 7 as the substrate (20 salt 11 was also productive (entry 2), albeit somewhat less so. Notably, iron(iii) chloride generated no conversion at either ambient or elevated temperatures (entries 3 and 4). Trifluoroacetic acid (TFA) was similarly ineffective (entry 5). Meanwhile, a screen of various solvents revealed that, while the transformation could occur in a range of media (entries 6–9), THF was optimal. Finally, by raising the temperature to 90 °C (entry 10) or 100 °C (entry 11), up to 96% NMR yield (85% isolated yield) of adduct 8 could be obtained in the same time period.Optimization studies^a

CaCuMn<Subscript>6</Subscript>O<Subscript>12</Subscript> vs. CaCu<Subscript>2</Subscript>Mn<Subscript>5</Subscript>O<Subscript>12</Subscript>: A comparative study

The ferrimagnetic compounds Ca(Cu_xMn_3?x)Mn₄O₁₂ of the double distorted perovskites AC₃B₄O₁₂ family exhibit a rapid increase of the ferromagnetic component in magnetization at partial substitution of square coordinated (Mn³⁺)_C for (Cu²⁺)_C. In the transport properties, this is seen as a change of the semiconducting type of resistivity for the metallic one. The evolution of magnetic properties of Ca(Cu_xMn_3?x)Mn₄O₁₂ is driven by strong antiferromagnetic exchange interaction of (Cu²⁺)_C with (Mn³⁺/Mn⁴⁺)_B coordinated octahedra. The competing interactions of (Mn³⁺)_C with (Mn³⁺/Mn⁴⁺)_B lead to the formation of noncollinear magnetic structures that can be aligned by magnetic fields.     

Oligomeric phthalonitriles and tetrakis(phenylethynyl)benzene blends with improved processing and thermal properties

Blended resins were prepared from the resorcinol-based PEEK-like oligomeric phthalonitrile resin (RES) and tetrakis(phenylethynyl)benzene (TPEB), a high char yield arylacetylene resin. Initial probing of curing properties using differential scanning calorimetry, indicated that TPEB and RES co-cure when heated. Characterization of thermal properties using thermogravimetric analysis indicated that a 1:1 TPEB-RES blend (by weight) exhibited a char yield of 80% which was 6% larger compared to pure RES (74%). According to FTIR characterization, the enhanced thermal properties of TPEB-RES were the result of increased crosslinking density. Rheological studies of TPEB, RES, and TPEB-RES blends indicated that blended systems exhibit similar processing characteristics as RES resin. For example, resins display ideal viscosities and relatively large processing windows when cured at 175 °C. Alternatively, pure TPEB resin exhibits low viscosities when melted, which are not suitable for preparing composite materials. This study indicates that preparing TPEB-RES blends is an effect strategy for improving thermal performance of potential RES composites while still maintaining the required processability for fabrication of dense polymer composites. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2630–2640     

The Hydrazine–O2 Redox Couple as a Platform for Organocatalytic Oxidation: Benzo[c]cinnoline‐Catalyzed Oxidation of Alkyl Halides to Aldehydes

An organocatalytic oxidation platform that capitalizes on the capacity of hydrazines to undergo rapid autoxidation to diazenes is described. Commercially available benzo[c]cinnoline is shown to catalyze the oxidation of alkyl halides to aldehydes in a novel mechanistic paradigm involving nucleophilic attack, prototropic shift, and hydrolysis. The hydrolysis and reoxidation events occur readily with only adventitious oxygen and water. A survey of the scope of viable substrates is shown along with mechanistic and computational studies that give insight into this mode of catalysis.     

Nature of the high-pressure transition in Fe2O3 hematite

We present a new method to separate the crystallographic and electronic phase transitions in hematite using x-ray emission spectroscopy and x-ray diffraction. Our observations, based on the behavior of a metastable high-pressure phase in the stability domain of the low-pressure phase, show that the electronic transition is preempted by the crystallographic transition. The former occurs only afterwards in the high-pressure phase, possibly as a result of a Mott transition. The idea that the electronic transition drives the transition in hematite is therefore invalidated. Such methods should help elucidate the mechanics and the driving forces behind a number of first-order high-pressure phase transitions.     

Approximating <Emphasis Type="Italic">J</Emphasis>-holomorphic curves by holomorphic ones

Given an almost complex structure J in a cylinder of (p > 1) together with a compatible symplectic form and given an arbitrary J-holomorphic curve without boundary in that cylinder, we construct an holomorphic perturbation of , for the canonical complex structure J ₀ of , such that the distance between these two curves in W ^1,2 and norms, in a sub-cylinder, are controled by quantities depending on J, and by the area of only. These estimates depend neither on the topology nor on the conformal class of . They are key tools in the recent proof of the regularity of 1-1 integral currents in [RT].Received: 2 October 2003, Accepted: 18 November 2003, Published online: 25 February 2004