Diode-pumped Yb:CaF_2 multipass amplifier producing 50 mJ with dynamic analysis for high repetition rate operation

The dynamic thermal issues of the Yb:CaF \(_{2}\) crystals within a multi-tens-mJ-energy multipass amplifier operating in the 20–100 Hz repetition rate range and pumped in quasi-cw regime have been studied at different timescales. Thermal response times of the system have been precisely investigated and analyzed, for the first time to our best knowledge in such amplifiers. This study includes a dual timescale analysis: in the long-time-scale (second) with direct thermography mapping and in the millisecond range with thermal lensing in a pump-probe configuration. Very atypical positive lens behavior with fluorites will also be presented and discussed. This complete analysis is used to demonstrate the capability of \(\hbox {Yb:CaF}_{2}\) multipass amplifier systems for operating the amplifier at 20 Hz with 57 mJ and 100 Hz with 32-mJ stable regime. Indeed, high repetition rate multipass amplifier has been realized for the first time with \(\hbox {Yb:CaF}_{2}\) and for this energy. The results have been analyzed precisely to take into account the thermal issues and excellent beam quality, with a \(M^2\) of 1.1. The pointing stability of 20 μrad has been measured documenting the reliability of the high repetition rate mJ amplifier.     

Picosecond nonlinearity of GeO2–Bi2O3–PbO–TiO2 glasses at 532 and 1,064 nm

The third-order optical properties of GeO₂–Bi₂O₃–PbO–TiO₂ glasses at 532 nm and 1,064 nm were studied to evaluate their potential for optical limiting and all-optical switching. The Z-scan technique was used to determine the nonlinear (NL) refractive index, n ₂, and the NL absorption coefficient, α ₂, of samples with different amounts of the constituent oxides. Values of n ₂ ≈ + 0.7 × 10^?14 cm²/W at 1,064 nm and ≈+1.5 × 10^?14 cm²/W at 532 nm were measured. The NL absorption coefficient, α ₂, was smaller than the minimum that our apparatus can measure (α ₂ < 0.01 cm/GW) in the near-infrared (1,064 nm); in the visible region (532 nm), we obtained α ₂ ≈ 4.4 cm/GW. The set of NL parameters measured indicates the potential usefulness of the GeO₂–Bi₂O₃–PbO–TiO₂ glasses for all-optical switching at 1,064 nm and for optical limiting at 532 nm.     

Photoluminescence thermometry with alkyl‐terminated silicon nanoparticles dispersed in low‐polar liquids

Steady‐state and time‐resolved photoluminescence of silicon nanoparticles dispersed in low‐polar liquids at above room temperature is studied. The roles of low‐polar liquids as well as mechanisms responsible for their temperature‐dependent photoluminescence are discussed. The thermal sensitivity of the photoluminescence is estimated and application of the nanoparticles as nanothermometers is proposed.

     

Characterizing the Memory Effect on the amylose tris(3,5-dimethylphenyl) carbamate stationary phase

Acid/base modifiers are sometimes used as additives in normal phase elution on columns packed with CHIRALPAK^® AD^®. They affect enantioseparations in ways that are not understood for the lack of systematic studies, which makes the scale-up of preparative separations difficult to predict. Once a column has been exposed to these modifiers, the selectivity of certain pairs of enantiomers may change, for the better or the worse. Numerous molecules that are affected by this phenomenon are listed in the literature. We selected five of them, the selectivity of which changes as more acidic or basic solutions are percolated through the column. The selectivity of ketoprofen, 4-chlorophenylalanine methyl and ethyl esters improves as a solution of Ethanesulfonic Acid is percolated through the column. The selectivity of Propranolol HCl and Tröger’s base increases as a solution of diisopropylamine is percolated through the column. Each one of these five compounds is inversely affected by the percolation of the opposite acid/base solution. We used trans-Stilbene Oxide (tso) as a “standard” to determine the columns stability because no Memory Effect is observed for it (its retention, enantioselectivity, and resolution remain constant). Karl Fisher titrations showed that only slight changes in the water content of the mobile phase occurred, and that a unique water to polymer moiety ratio is important. Analytical studies of the stationary phase suggest that slow protonation/deprotonation of water attached to the carbamate moiety may be responsible for the acid/base Memory Effect. Finally, we showed that the Memory Effect can be minimized by percolating through the column a sufficiently concentrated solution of the appropriate acid or base. Thus, columns that were unreliable for method development, due to the Memory Effect, can now be used. As a result, the need to store several CHIRALPAK AD columns, specific for each condition of the Memory Effect, is eliminated.     

Investigation of the adsorption mechanism of a peptide in reversed phase liquid chromatography,from pH controlled and uncontrolled solutions

The single-component equilibrium adsorption of the tripeptide Leucyl-Leucyl-Leucine (LLL) on a high-efficiency Jupiter Proteo column (C₁₂$C_{12}$) was investigated experimentally and modeled theoretically. The experimental equilibrium isotherms of LLL for adsorption on a C₁₂$C_{12}$ packing material from an aqueous solution of methanol (48%) and trifluoroacetic acid (0.1%) were measured by frontal analysis (FA). The FA measurements were done with two solutions, one in which the pH was controlled, the other in which it was not. Two solutions of LLL in the mobile phase were prepared (4.3 and 5.4 g/L) and their pH measured (2.94 and 2.88), respectively. The first solution was titrated with TFA to match the pH of the mobile phase (2.03), so its pH was controlled. The pH of the other solution was left uncontrolled. In both cases the isotherms could be modeled by a bi-Langmuir equation, a choice consistent with the bimodal affinity energy distribution (AED) obtained for LLL. The isotherm parameters derived from the inverse method (IM) of isotherm determination under controlled pH conditions (by fitting calculated profiles to experimental breakthrough profiles) are in a good agreement with those derived from the FA data. Under uncontrolled pH conditions, the application of IM suggests the coexistence of two different adsorption mechanisms. According to the isotherm parameters found by these three methods (FA, AED and IM), the C₁₂$C_{12}$-bonded silica can adsorb around 500 and 70 g/L of LLL under controlled and uncontrolled pH conditions, respectively. The adsorption of LLL on the C₁₂$C_{12}$ material strongly depends on the pH of the mobile phase and on the quantity of TFA added, which plays the role of an ion-pairing agent.     

Theoretical advantages and drawbacks of on-line,multidimensional liquid chromatography using multiple columns operated in parallel

The theoretical advantages and drawbacks of using a multiple-, parallel column approach in on-line multidimensional liquid chromatography systems were investigated. Much time or peak capacity can be gained with the use of multiple parallel columns at the second-dimension while the aggregate time of separation increases only by the increment of the gradient time of the second-dimension. Multidimensional chromatographic systems are now used to perform many tasks ranging from routine, fast analyses to specialized, arduous separations. In this work, we focus on the advantages of a multiple, parallel columns approach to on-line multidimensional liquid chromatography systems. Calculations of the achievable peak capacities were made as functions of the number of columns operated in parallel. Increasing the number of second-dimension columns from one to two or three causes the largest increase in peak capacity with only a slight increase of aggregate time. We also present some practical aspects to consider when attempting multidimensional separations with multiple columns operated in parallel.     

Excluded-volume effect for various chain models. I. Application to optical anisotropy and end-to-end distance of linear polymers

A study of the effect of excluded volume on the mean-square optical anisotropy 〈γ²〉 and the mean-square end-to-end distance 〈R²〉 has been carried out for polymer chains of up to 2000 bonds. The calculations have been made for models assuming (a) equiprobability of internal rotations and (b) interdependence of short-range intramolecular interactions. All the results indicate that 〈γ²〉 is practically insensitive to the excluded-volume effect. Concomitantly the behavior of 〈R²〉 has been analyzed.     

Enzymatically prepared n-alkyl esters of glucuronic acid: the effect of hydrophobic chain length on surface properties

N-isopropylacrylamide (NIPA) homopolymers having carboxylic acid-end groups were synthesized by using mercaptoacetic acid (MAA) as the chain transfer agent. Polymerization was achieved in ethanol using azobisisobutyronitrile (AIBN) as the initiator. Average molecular weight of the homopolymer estimated by titration was 1958. This carboxylic acid-ended poly(NIPA) was then copolymerized with polyethylenimine (PEI, M(W)-2000) using a water soluble carbodiimide (EDAC). With respect to carboxyl-ended poly(NIPA), the block copolymers exhibited a pH dependent-temperature sensitivity and higher LCST values in acidic pH. Scanning tunneling microscopy (STM) images of both the homopolymer and the copolymer were obtained at 25 and 45 degrees C with tip-sample bias voltages of up to 800 mV and tunneling currents approximately 1 nA. These images showed that STM can be used to visualize both the formation of copolymer chains and their structure, and also their stimuli-responsive behavior.