Energy Dispersive X-Ray Spectrometry by Microcalorimetry for the SEM

 Analytical X-ray spectrometry for electron beam instruments has advanced significantly with the development of the microcalorimeter energy dispersive X-ray spectrometer (μcal EDS). The μcal EDS operates by measuring the temperature rise when a single photon is absorbed in a metal target. A cryoelectronic circuit with electrothermal feedback and a superconducting transition edge sensor serves as the thermometer. Spectral resolution approaching 4.5 eV for high energy photons (6000 eV) and 2 eV for low energy photons below 2000 eV has been demonstrated in energy dispersive operation across a photon energy range from 250 eV to 8 keV. Spectra of a variety of materials demonstrate the power of the μcal EDS to solve practical problems while operating on a scanning electron microscope platform.     

Double Yielding in a Styrene/Butadiene Star Block Copolymer

Summary: The morphology and tensile deformation behaviour of a highly asymmetric styrene/butadiene star block copolymer (polystyrene (PS) content = 74%) containing random PS‐co‐PB (polybutadiene) copolymer as a rubbery phase were investigated. The existence of double yielding, similar to that observed in some semicrystalline polymers, was detected in this nanostructured amorphous polymer. The observed phenomenon may be correlated with two different micromechanical processes taking place at the initial stage of deformation.

The stress‐strain curve of the star block copolymer prepared here (each curve represents a different method). The two yield points are clearly visible (labelled I and II).     

Antioxidant encapsulated porous poly(lactide-co-glycolide) microparticles for developing long acting inhalation system

The purpose of this study was to fabricate porous poly(lactide-co-glycolide) (PLGA) microparticles for efficient pulmonary deposition and increased therapeutic duration of the antioxidant anthocyanin (ATH). These microparticles were prepared by a water-in-oil-in-water (W(1)/O/W(2)) multi-emulsion method with vaporizing ammonium bicarbonate (AB) as a porogen and starch as a viscous additive. High porosity achieved by the decomposition reaction of AB to the base of ammonia, carbon dioxide, and water vapor at 50°C enabled efficient deposition of ATH throughout the entire lung in BALB/c mice. In addition, the porous microparticles incorporating starch showed sustained ATH release characteristics (up to 5 days) and protracted antioxidant activity (up to 5 days) for 2,2-diphenyl-1-pikryl-hydrazyl (DPPH) radicals, which was comparable to that of the porous microparticles without starch which completely released ATH in 2h. Furthermore, these porous microparticles incorporating starch led to longer ATH residence (up to 20 days) in in vivo lung epithelium. We believe that this system has great pharmaceutical potential as a long-acting antioxidant for continuously relieving oxidative stress in pulmonary diseases like chronic obstructive pulmonary disease (COPD).     

Suzuki Reaction of Aryl Bromides Using a Phosphine-Free Magnetic Nanoparticle-Supported Palladium Catalyst

A palladium catalyst immobilized on superparaganetic nanoparticles was prepared with a palladium loading of 0.30 mmol/g. The catalyst was characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, vibrating sample magnetometry, thermogravimetric analysis, Fourier transform infrared, atomic absorption spectrophotometry, and nitrogen adsorption. The immobilized palladium catalyst was an efficient catalyst without added phosphine ligands for the Suzuki cross-coupling reaction of several aryl bromides with phenylboronic acid. The recovery of catalyst was simply by magnetic decantation in the presence of a magnet. The immobilized palladium catalyst can be reused many times without significant degradation in catalytic activity. No leaching of active palladium species into the reaction solution was detected.     

Interspecies Interaction of Signal Peptide PapR Secreted by <Emphasis Type="Italic">Bacillus cereus</Emphasis> and Its Effect on Production of Antimicrobial Peptide

This study was carried out to investigate the interspecies interaction of PapR peptide secreted by Bacillus cereus on production of BSAP-254, an antimicrobial peptide produced by Bacillus subtilis SC-8 isolated from the Korean fermented soybean paste and exhibited narrow antagonistic activity against the B. cereus group, but not against other foodborne pathogens. PapR is a signal peptide that activates PlcR, which is a pleiotropic regulator controlling the expression of various virulence factors in B. cereus. When B. subtilis SC-8 was co-cultured with B. cereus, it completely inhibited the growth of B. cereus within 12 h, and the rate of BSAP-254 production was increased 34.2% at 12 h. Furthermore, 5 μM of synthetic PapR peptide added to the culture of B. subtilis SC-8 increased the rate of BSAP-254 production up to 59.7%. The growth of B. subtilis SC-8, however, was not significantly different with or without the addition of PapR. When B. cereus papR mutant was co-cultured with B. subtilis SC-8, the growth of the mutant was not inhibited and the rate of BSAP-254 production was decreased by 45%.     

Regioselectivity of aliphatic versus aromatic hydroxylation by a nonheme iron(II)-superoxo complex

Many enzymes in nature utilize molecular oxygen on an iron center for the catalysis of substrate hydroxylation. In recent years, great progress has been made in understanding the function and properties of iron(IV)-oxo complexes; however, little is known about the reactivity of iron(II)-superoxo intermediates in substrate activation. It has been proposed recently that iron(II)-superoxo intermediates take part as hydrogen abstraction species in the catalytic cycles of nonheme iron enzymes. To gain insight into oxygen atom transfer reactions by the nonheme iron(II)-superoxo species, we performed a density functional theory study on the aliphatic and aromatic hydroxylation reactions using a biomimetic model complex. The calculations show that nonheme iron(II)-superoxo complexes can be considered as effective oxidants in hydrogen atom abstraction reactions, for which we find a low barrier of 14.7 kcal mol(-1) on the sextet spin state surface. On the other hand, electrophilic reactions, such as aromatic hydroxylation, encounter much higher (>20 kcal mol(-1)) barrier heights and therefore are unlikely to proceed. A thermodynamic analysis puts our barrier heights into a larger context of previous studies using nonheme iron(IV)-oxo oxidants and predicts the activity of enzymatic iron(II)-superoxo intermediates.     

Proton-promoted oxygen atom transfer vs proton-coupled electron transfer of a non-heme iron(IV)-oxo complex

Sulfoxidation of thioanisoles by a non-heme iron(IV)-oxo complex, [(N4Py)Fe(IV)(O)](2+) (N4Py = N,N-bis(2-pyridylmethyl)-N-bis(2-pyridyl)methylamine), was remarkably enhanced by perchloric acid (70% HClO(4)). The observed second-order rate constant (k(obs)) of sulfoxidation of thioaniosoles by [(N4Py)Fe(IV)(O)](2+) increases linearly with increasing concentration of HClO(4) (70%) in acetonitrile (MeCN)at 298 K. In contrast to sulfoxidation of thioanisoles by [(N4Py)Fe(IV)(O)](2+), the observed second-order rate constant (k(et)) of electron transfer from one-electron reductants such as [Fe(II)(Me(2)bpy)(3)](2+) (Me(2)bpy = 4,4-dimehtyl-2,2'-bipyridine) to [(N4Py)Fe(IV)(O)](2+) increases with increasing concentration of HClO(4), exhibiting second-order dependence on HClO(4) concentration. This indicates that the proton-coupled electron transfer (PCET) involves two protons associated with electron transfer from [Fe(II)(Me(2)bpy)(3)](2+) to [(N4Py)Fe(IV)(O)](2+) to yield [Fe(III)(Me(2)bpy)(3)](3+) and [(N4Py)Fe(III)(OH(2))](3+). The one-electron reduction potential (E(red)) of [(N4Py)Fe(IV)(O)](2+) in the presence of 10 mM HClO(4) (70%) in MeCN is determined to be 1.43 V vs SCE. A plot of E(red) vs log[HClO(4)] also indicates involvement of two protons in the PCET reduction of [(N4Py)Fe(IV)(O)](2+). The PCET driving force dependence of log k(et) is fitted in light of the Marcus theory of outer-sphere electron transfer to afford the reorganization of PCET (λ = 2.74 eV). The comparison of the k(obs) values of acid-promoted sulfoxidation of thioanisoles by [(N4Py)Fe(IV)(O)](2+) with the k(et) values of PCET from one-electron reductants to [(N4Py)Fe(IV)(O)](2+) at the same PCET driving force reveals that the acid-promoted sulfoxidation proceeds by one-step oxygen atom transfer from [(N4Py)Fe(IV)(O)](2+) to thioanisoles rather than outer-sphere PCET.     

Salicylimine-based fluorescent chemosensor for aluminum ions and application to bioimaging

In this study, an assay to quantify the presence of aluminum ions using a salicylimine-based receptor was developed utilizing turn-on fluorescence enhancement. Upon treatment with aluminum ions, the fluorescence of the sensor was enhanced at 510 nm due to formation of a 1:1 complex between the chemosensor and the aluminum ions at room temperature. As the concentration of Al(3+) was increased, the fluorescence gradually increased. Other metal ions, such as Na(+), Ag(+), K(+), Ca(2+), Mg(2+), Hg(2+), Mn(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+), Pb(2+), Cr(3+), Fe(3+), and In(3+), had no such significant effect on the fluorescence. In addition, we show that the probe could be used to map intracellular Al(3+) distribution in live cells by confocal microscopy.     

Carbonic Anhydrase Immobilized on Encapsulated Magnetic Nanoparticles for CO(2) Sequestration

Bovine carbonic anhydrase (BCA) was covalently immobilized onto OAPS (octa(aminophenyl)silsesquioxane)-functionalized Fe(3) O(4) /SiO(2) nanoparticles by using glutaraldehyde as a spacer. The Fe(3) O(4) nanoparticles were coated with SiO(2) , onto which was grafted OAPS, and the product was characterized using SEM, TEM, XRD, IR, X-ray photoelectron spectroscopy (XPS), and magnetometer analysis. The enzymatic activities of the free and Fe(3) O(4) /SiO(2) /OAPS-conjugated BCA (Fe?CA) were investigated by hydrolyzing p-nitrophenylacetate (p-NPA), and hydration and sequestration of CO(2) to CaCO(3) . The CO(2) conversion efficiency and reusability of the Fe?CA were studied before and after washing the recovered Fe?CA by applying a magnetic field and quantifying the unreacted Ca(2+) ions by using ion chromatography. After 30?cycles, the Fe?CA displayed strong activity, and the CO(2) capture efficiency was 26-fold higher than that of the free enzyme. Storage stability studies suggested that Fe?CA retained nearly 82?% of its activity after 30?days. Nucleation of the precipitated CaCO(3) was monitored by using polarized light microscopy, which revealed the formation of two phases, calcite and valerite, at pH?10 upon addition of serine. The magnetic nanobiocatalyst was shown to be an excellent reusable catalyst for the sequestration of CO(2.).     

The initial step of silicate versus aluminosilicate formation in zeolite synthesis: a reaction mechanism in water with a tetrapropylammonium template

The initial step for silicate and aluminosilicate condensation is studied in water in the presence of a realistic tetrapropylammonium template under basic conditions. The model corresponds to the synthesis conditions of ZSM5. The free energy profile for the dimer formation ((OH)(3)Si-O-Si-(OH)(2)O(-) or [(OH)(3)Al-O-Si-(OH)(3)](-)) is calculated with ab initio molecular dynamics and thermodynamic integration. The Si-O-Si dimer formation occurs in a two-step manner with an overall free energy barrier of 75 kJ mol(-1). The first step is associated with the Si-O bond formation and results in an intermediate with a five-coordinated Si, and the second one concerns the removal of the water molecule. The template is displaced away from the Si centres upon dimer formation, and a shell of water molecules is inserted between the silicate and the template. The main effect of the template is to slow down the backward hydrolysis reaction with respect to the condensation one. The Al-O-Si dimer formation first requires the formation of a metastable precursor state by proton transfer from Si(OH)(4) to Al(OH)(4)(-) mediated by a solvent molecule. It then proceeds through a single step with an overall barrier of 70 kJ mol(-1). The model with water molecules explicitly included is then compared to a simple calculation using an implicit continuum model for the solvent. The results underline the importance of an explicit and dynamical treatment of the water solvent, which plays a key role in assisting the reaction.