Reactions in aminosilane-epoxy prepolymer systems. II. Reactions of alkoxysilane groups with or without the presence of water

The hydrolysis and reactions of alkoxy silane groups have been studied on a model compound (TA) prepared from 2 mol of phenyl glycidyl ether and 1 mol of aminopropyl triethoxy silane. At low (40°C) and high (140°C) temperatures, the monomer conversion and the evolution of the molecular mass are followed by size exclusion chromatography (SEC). During the same reaction time, the evolution of the functional groups, hydroxyl CH? OH, ethoxy ? O? C₂H₅, and siloxane Si? O? Si, is observed by FTIR spectroscopy. Without the presence of water, reactions between hydroxyl and ethoxy silane lead to gelation at the end of the reaction. A by-product, probably a cyclic tetramer is also formed. After the hydrolysis, the reaction of the model compound is quite different. The product of reaction is always soluble, even after a treatment at high temperatures, and the evolution of the molecular mass versus the reaction time seems to correspond to the condensation giving a dead cyclic tetramer. From this study it is evident that the curing cycle has a great influence on the properties of the interface of a composite based on a epoxy matrix.     

Rh(CO)2Cl]2-catalyzed domino reactions involving allylic substitution and subsequent carbocyclization reactions

[reaction: see text] Three novel domino reaction processes have been discovered and developed that employ the regioselective and stereoselective [Rh(CO)(2)Cl](2)-catalyzed alkylations of allylic trifluoroacetates with alpha-substituted sodiomalonates followed by an intramolecular Pauson-Khand annulation, a [5 + 2] cycloaddition, or a cycloisomerization. A unique aspect of the methodology is that a single catalyst is used to effect sequential transformations simply by increasing the temperature for the second reaction.     

Proton affinities by reactant ion monitoring: Triphenyl group Va compounds

Proton affinities of a series of triphenyl Group Va compounds have been determined by bracketing using reactant ion monitoring: (C₆H₅)₃N = 904 ± 8 kJ mol^?1, (C₆H₅)₃P = 968 ± 5 kJ mol^?1, (C₆H₅)₃As = 904 ± 8 kJ mol^?1 and (C₆H₅)₃Sb = 846 ± 8 kJ mol^?1. The large difference in substituent effect of phenyl for hydrogen between As or P and N may result from overlap of the 2p orbitals of N with the sp² orbitals on the ring carbons and lack of overlap for P or As. Proton affinities of phenylalkylphosphine oxides are essentially the same, 904 ± 8 kJ mol^?1, independent of alkyl group.     

Fast determination of the tin content in cassiterite ores by photon activation method

Photon activation analysis has been success-fully applied to the fast and non-destructive analysis of tin in cassiterite ores based on the 159.7 keV gamma line of^123mSn produced in the¹²⁴Sn/γ, n/^123mSn reaction. In order to improve the accuracy of analytical results, corrections for self-absorption and pile-up effects were performed. Under typical conditions /15 μA electron beam current, 15 MeV bremsstrahlung energy, 5 min irradiation time and 10 min measurement/ the sensitivity of the analysis is 10 ppm. The proposed method can be used for routine analysis of tin in geological samples.     

Semi-industrial isolation of salicin and amygdalin from plant extracts using slow rotary counter-current chromatography

Salicin in the bark extract of Salix alba and amygdalin in the fruit extract of Semen armeniacae were each separated by slow rotary counter-current chromatography (SRCCC). The apparatus was equipped with a 40-L column made of 17 mm i.d. convoluted Teflon tubing. A 500g amount of crude extract containing salicin at 13.5% was separated yielding 63.5 g of salicin at 95.3% purity in 20h using methyl tert-butyl ether-l-butanol (1:3) saturated by methanol-water (1:5) as a stationary phase and methanol-water (1:5) saturated by methyl tert-butyl ether-1-butanol (1:3) as a mobile phase. A 400g amount of crude extract containing amygdalin at 55.3% was isolated to yield 221.2g of amygdalin at 94.1% purity in 19h using ethyl acetate-1-butanol (1:2) saturated by water as a stationary phase and water saturated by ethyl acetate-1-butanol (1:2) as a mobile phase. The flow rate of the mobile phase was 50 ml/min. The results show that industrial SRCCC separation of salicin and amygdalin is feasible using a larger column at a higher flow rate of the mobile phase.     

Control synthesis of isocyanate and alkoxy-silane terminated macromers

The kinetics of the reactions in bulk of 4,4′-dicyclohexyl methane diisocyanate (H₁₂ MDI) and 5-isocyanato-1,3,3-trimethylcyclohexylmethyl isocyanate or isophorone diisocyanate (IPDI) with benzylic alcohol (BZA) and α-hydroxy-ω-methyl ether-terminated polyethylene oxide PEO (M?_w = 350) were studied by size exclusion chromatography (SEC) and ¹³C nuclear magnetic resonance (¹³C-NMR). The substitution effect is exhibited in the case of H₁₂ MDI reactivity. The kinetic constants were calculated by a numerical method. The second-order kinetic mechanism was shown to be valid. In the IPDI case, the cycloaliphatic isocyanate group is shown to be more reactive than the aliphatic group in our conditions, without catalysis, in agreement with previous results from the literature, in our obtained by ¹H-and ¹³C-NMR without any catalyst. The reactivity ratio is found to be on the order of 3. This difference in reactivity of the two isocyanate groups is used for the control synthesis of isocyanate and alkoxy-silane-terminated macromers.     

Synthesis of N,N-diethyldithiocarbamate functionalized 1,4-polyisoprene, from natural rubber and synthetic 1,4-polyisoprene

N,N-Diethyldithiocarbamate functionnalized 1,4-polyisoprenes were prepared from 1,4-polyisoprenes (natural or synthetic). The syntheses were performed by nucleophilic addition of N,N-diethyldithiocarbamate salts upon oxirane rings of epoxidized units according to a SN2 mechanism with ring opening. Studies on model molecules of epoxidized 1,4-polyisoprene units (1,2-epoxy-1-methylcyclohexane and 4,5-epoxy-4-methyloctane) were previously achieved to develop the procedure. The best yields were obtained at low temperature in polar medium, and more especially in water with sodium N,N-diethyldithiocarbamate (DEDT-Na) as reagent. A diastereospecific addition was noted when reaction was performed in water with DEDT-Na. Afterwards, the developed procedure was successfully generalized to epoxidized synthetic polyisoprenes and epoxidized natural rubber (in THF, then in latex medium). Excellent results were obtained in latex medium with epoxidized natural rubber (ENR) latices. As with the models, a diastereospecific addition of sodium N,N-diethyldithiocarbamate trihydrate onto epoxidized 1,4-polyisoprene units of ENR was observed at the condition to bring the latex medium to pH 8 before introduction of DEDT-Na. Influence of temperature, drc, and DEDT-Na concentration were successively examined to determine the best conditions of the addition on ENR latices.     

DNA-templated self-assembly of protein and nanoparticle linear arrays

Self-assembling DNA tiling lattices represent a versatile system for nanoscale construction. Self-assembled DNA arrays provide an excellent template for spatially positioning other molecules with increased relative precision and programmability. Here we report an experiment using a linear array of DNA triple crossover tiles to controllably template the self-assembly of single-layer or double-layer linear arrays of streptavidin molecules and streptavidin-conjugated nanogold particles through biotin-streptavidin interaction. The organization of streptavidin and its conjugated gold nanoparticles into periodic arrays was visualized by atomic force microscopy and scanning electron microscopy.     

Synthesis and properties of an ω,ω′-appended eighteen carbon chains hypericin derivative

Summary An ,-appended eighteen carbon chains hypercin derivative (2) was synthesized starting from emodin. The overall yield of the seven step synthesis was 12%. The¹H and¹³C NMR, absorption, and emission spectroscopic properties were measured;2 can be dissolved even in apolar solvents and polyethylene.

---

Synthese und Eigenschaften eines mit C₁₈-Ketten ,-substituierten Hypericinderivats

Zusammenfassung Ein in den Positionen , mit zwei C₁₈-Ketten substituiertes Derivat des Hypericins (2) wurde ausgehend von Emodin synthetisiert. Die Gesamtausbeute der siebenstufigen Synthese betrug 12%. Die¹H- und¹³C-NMR, absorptions- und emissionsspektroskopischen Eigenschaften wurden gemessen;2 kann sogar in apolaren Lösungsmitteln und Polyethylen gelöst werden.