ns脉冲激光对K9玻璃的破坏实验

 采用高速PIN光电探测器和高带宽的数字存储示波器，实时检测透射光脉冲和散射光脉冲的变化特征，并将之用作材料破坏的光学判据，测量得到K9玻璃在1.06μm纳秒脉冲激光作用下的能量损伤阈值约18mJ，相应的能量密度阈值为1.0kJ/cm²。通过分析透射光脉冲和散射光脉冲的特征，给出了材料的破坏时刻，并推断出K9玻璃所能承受的极限光强为10¹⁵W/m²。研究了能量透过率与泵浦能量的关系，并初步探讨了透明材料的破坏机理。结果表明：在多纵模激光的作用下，透明光学材料破坏是电离击穿与自聚焦效应综合作用的结果。     

连续照明时成像对比度与气象条件的关系

 通过同轴激光连续照明成像模型分析了大气后向散射对成像对比度的影响，得出了考虑散射因素时成像对比度的计算公式。基于不同气象条件下大气粒子散射特点，讨论了霾和雾两种不同天气时成像对比度随照明距离的变化规律，并与实验结果进行了对比，计算结果与实验吻合较好。     

喷气Z箍缩内爆等离子体的雪铲模型

 在喷气Z pinch内爆等离子体研究中，雪铲模型是一种常用的、比较简单的物理模型。根据实验中提供的电流波形，负载线质量和初始半径，可以通过雪铲模型来估算内爆到心的时刻。根据一维运动方程和不同构形下的解析解以及部分实验结果相结合，讨论了雪铲模型的适用范围。数值计算的内爆时间和实验（Gamble II, Double EAGLE, BLACKJACK 5）测量值符合得较好。结果表明，雪铲模型在喷气Z pinch实验的负载优化设计研究中是很有参考价值的方法。     

钌(Ⅱ)卟啉催化顺式二苯乙烯类化合物的选择性合成

由芳醛制得的腙盐在钌(Ⅱ)卟啉催化下发生自身偶合，以较高收率合成了二苯乙烯类化合物(～90％的顺式选择性)。部分中间体及目标化合物的结构经^1H NMR，^13C NMR和MS表征。     

Three Novel Eremophilanolides from Ligularia virgaurea spp. oligocephala

From the alcoholic extract of the whole plant of Ligularia virgaurea spp. oligocephala, three novel eremophilane sesquiterpene lactones, 6α, 10α-dihydroxy- 1-oxoeremophila-7(11), 8(9)-dien-8, 12-olide, 613, 10α-dihydroxy-1-oxoeremophila-7 (ll), 8 (9)-dien-8, 12-olide and 10α-hydroxy-1-oxoeremophila-7(l 1), 8(9)-dien-8, 12-olide were isolated. Their structures were elucidated by various spectroscopic methods including intensive 2D NMR techniques (COSY,HMQC, HMBC and ^1H-^1H NOESY) and HR-MS.     

Remarks on the Regularity to 3-D Ideal Magnetohydrodynamic Equations

In this paper we are interested in the sufficient conditions which guarantee the regularityof solutions of 3-D ideal magnetohydrodynamic equations in the arbitrary time interval [0,T].Fivesufficient conditions are given.Our results are motivated by two main ideas:one is to control theaccumulation of vorticity alone;the other is to generalize the corresponding geometric conditions of3-D Euler equations to 3-D ideal magnetohydrodynamic equations.     

A relaxed model and its homogenization for nematic liquid crystals in composite materials

We analyse a model for equilibrium configurations of composite systems of nematic liquid crystal with polymer inclusions, in the presence of an external magnetic field. We assume that the system has a periodic structure, and consider the relaxed problem on the unit length constraint of the nematic director field. The relaxation of the Oseen–Frank energy functional is carried out by including bulk as well as surface energy penalty terms, rendering the problem fully non‐linear. We employ two‐scale convergence methods to obtain effective configurations of the system, as the size of the polymeric inclusions tends to zero. We discuss the minimizers of the effective energies for, both, the constrained as well as the unconstrained models. Copyright © 2004 John Wiley & Sons, Ltd.     

p+209Bi核反应微观数据的理论计算

利用光学模型、激光模型、蒸发模型及扭曲波玻恩近似理论,对入射能量从阈能到300MeV,p+²⁰⁹Bi的中子反应截面、剩余核截面、出射粒子的多重数进行了理论计算及分析,并将计算结果与实验数据进行了比较.同时得到一组能量到50?0MeV与实验数据符合很好的光学势参数.     

Effect of solvent nature on spin exchange in rigid nitroxide biradicals

Intramolecular electron spin exchange as a function of temperature and solvent viscosity and polarity has been studied by X-band electron paramagnetic resonance (EPR) spectroscopy in two rigid nitroxide biradicals existing in one spatial conformation only. Temperature variations of the isotropic hyperfine splitting constanta and exchange integral value |J/a| were measured from EPR spectra and subsequently analyzed. The interaction of polar solvent molecules with >N-O fragments of nitroxide groups led to a slight decrease of the |J/a| value with the increase of temperatureT. In contrast, the interaction of polar solvent molecules with functional groups inside the bridge resulted in a noticeable increase of |J/a| vs.T. In the last case, a coverse relationship between the values of |J/a| and the hyperfine splitting constanta has been observed for solvents with different polarity.     

Surface profile measurement of low-frequency vibrating objects using temporal analysis of fringe pattern

A simple and accurate algorithm (phase scanning method) is proposed for 3D surface contouring and dynamic response determination of a vibrating object. A sinusoidal fringe pattern is projected onto a low-frequency vibrating object by a programmable liquid crystal display projector. The fringe patterns are captured by a high-speed CCD camera with a telecentric gauging lens. Phase values are evaluated point by point using phase scanning method. From the phase values of each point on the object, the contour of the specimen at different instants of vibration can be retrieved. In this paper, a small vibrating coin is used to demonstrate the validity of the method and the experimental results are compared with test results on a stationary coin using four-step phase shifting and fast Fourier transform methods. The technique is especially useful in applications where the vibrating object has a complicated shape.