A Novel Cu-Mo／ZSM-5 Catalyst for NOx Catalytic Reduction with Ammonia

The Cu-Mo/ZSM-5 catalysts with different Cu/Mo ratios were prepared by wet impregnation method, and their catalytic performance for selective catalytic reduction of NOx was studied. The results showed that Cu-Mo/ZSM-5 is a very effective catalyst for NOx catalytic reduction with ammonia, especially when Cu/Mo molar ratio is about 1.5. It not only exhibited the extremely high catalytic activity, but also showed good stability for 02. The bulk phase structure of Cu-Mo/ZSM-5 catalysts was determined by XRD technique, and the results indicated that there is a maximum dispersion for Cu species when Cu/Mo molar ratio is 1.5, and an interaction between Cu and Mo along with HZSM-5 may be present in Cu-Mo/ZSM-5, which may possibly result in a special structure favorable for the catalytic reduction of NOx over Cu-Mo/ZSM-5 catalyst.     

3-(Triethoxysilyl)propionitrile sol-gel coating

3-(Triethoxysilyl)propionitrile (TESPN) sol-gel has been prepared under different conditions. It was employed for coating the surfaces of quartz and aluminum. Infrared (IR) and Raman spectra of TESPN and TESPN sol-gels have been recorded in the study of the sol-gel process. Transmission and reflection absorption IR (RAIR) spectra of TESPN sol-gel coated quartz and aluminum have also been collected for better understanding the film formation on the substrate surfaces. Spectra collected at different temperatures indicated that the silane film on quartz decomposes at 700 degrees C. Results from thermal gravimetric analysis (TGA) supported this result. Based on the group frequencies and the spectral behavior in different states, some vibrational modes were assigned to the observed bands. The anticorrosion behavior of the sol-gel coated aluminum in comparison with the uncoated metal was evaluated by measuring the potentiodynamic polarization and electrochemical impedance spectra (EIS).     

Durch Bromierung ausgelöste Umlagerung tertiärer Allylalkohole: Der Einfluss eines Fluor-Substituenten auf Reaktionsgeschwindigkeit und Reaktionsverlauf

Rearrangement of Tertiary Allyl Alcohols Induced by Bromination: The Effect of a Fluorine Substituent on the Rate and the Outcome of the Reaction The allyl alcohol bearing a methyl and a t-butyl group at the hydroxylated position was found to undergo a rearrangement when treated with bromine (or N-bromosuccinimide) in an aqueous medium and to afford a product mixture containing two regioisomeric ketones and one oxirane. Introduction of an additional methyl group or a fluorine atom at the non-terminal olefinic center led to a more selective discrimination between potential migratory groups. As the result of an exclusive t-butyl shift only one product, a ketone, was formed in both cases. Whereas the reaction rate was only slightly affected by the additional methyl group, it was substantially decreased by the fluorine atom.     

Thermal Decomposition Characteristics of 1,7-Diazido-2,4,6-trinitrazaheptane and its Application in Propellants

The thermal decomposition characteristics of1,7-diazido-2,4,6-trinitrazaheptane (DATH) and multi-component systems containing DATH were studied by using DSC, TG and DTG techniques. Three –NO₂ groups in the DATH molecule break away first from the main chain when DATH is heated up to 200°C. Following this process, the azido groups and the residual molecule decompose rapidly to release a great deal of heat within a short time. In the multi-component systems, DATH undergoes a strong interaction with the binder of the double-base propellant and a weak interaction with RDX. The burning rates of the two propellants were determined by using a Crawford bomb. The results showed that the burning rate rises by about 19–66% when 23.5%DATH is substituted for RDX in a minimum smoke propellant. Meanwhile, the N₂ level in the combustion gases is enhanced, which is valuable for a reduction of the signal level of the solid propellant. This revised version was published online in July 2006 with corrections to the Cover Date.     

Electrochemical reduction and voltammetric determination of metronidazole at a nanomaterial thin film coated glassy carbon electrode

Simple and sensitive electrochemical method for the determination of metronidazole, based on a nanostructured film coated glassy carbon electrode (GCE), is described. Multi-walled carbon nanotubes (MWNT) was dispersed into water in the presence of a hydrophobic surfactant to give very stable and homogeneous MWNT suspension, and a MWNT-film coated GCE was achieved via evaporating solvent. Metronidazole yields a well-defined reduction peak whose potential is −0.71 V at the MWNT-film coated GCE in pH 9.0 Britton-Robinson buffer. Compared with bare GCE, the MWNT-film modified GCE significantly enhances the reduction peak current of metronidazole. All the experimental parameters were optimized for the determination of metronidazole. The detection limit is 6×10⁻⁹ mol/l at 2 min accumulation. This method has been successfully used to determine metronidazole in the drugs. Furthermore, results obtained by the proposed method have been compared with spectrophotometric method.     

Pd_2(dba)_3/BINAP催化合成1,4-双-(4′-苯胺基苯酰基)苯

以Pd2(dba)3/BINAP催化1,4-双-(4′-溴苯酰基)苯和苯胺反应,合成了1,4-双-(4′-苯胺基苯酰基)苯,其结构经UV,1HNMR,13CNMR和元素分析表征。     

A Kinetic Evidence for the Nitroxyl Radicals Recycling Mechanism in the Photostabilizing Process of HALS

The photoinduced bulk polymerization of a reactive-hindered amine fight stabilizers(r-HALS), 4-acryloyl-2, 2, 6, 6-tetramethylpiperidinyl (ATMP), was performed at 80℃ by using a DPC technique. An unique periodic exponential attenuation-type oscillating curve was found when the polymerization was carried out in air, but this phenomenon was not found in nitrogen.It is supposed that this unique kinetic performance may be attributed to nitroxyl radicals that are produced in situ from the oxidation of ATMP. ATMP polymer with narrow polydispersity (d =1.03) can be obtained by photoinduced solution polymerization of ATMP. The signal detected in ESR may be assigned to the nitroxyl radicals in the matrix of ATMP polymer. Since this kind of recycling of nitroxyl radicals is well documented for the photostabilizing mechanism of HALS, the present results may serve as a kinetic evidence for this mechanism.     

A mild deprotection strategy for allyl-protecting groups and its implications in sequence specific dendrimer synthesis

A mild deprotection strategy for allyl ethers under basic conditions in the presence of a palladium catalyst is described. Under these conditions, aryl allyl ethers can be cleaved selectively in the presence of alkyl allyl ethers. These conditions are also effective in the deprotection of allyloxycarbonyl groups. The utility of the current methodology in sequence specific dendrimer synthesis is demonstrated.