Morphological investigation of hybrid Langmuir-Blodgett films of arachidic acid with a hydrotalcite/dendrimer nanocomposite

A hydrotalcite clay/dendrimer nanocomposite prepared by the ionic exchange process was adsorbed from suspension of the nanocomposite on a Langmuir monolayer of arachidic acid at the air/water interface, followed by compressing and transferring onto an arachidic acid monolayer Langmuir-Blodgett (LB) film on mica. For comparison, the hydrotalcite-adsorbed hybrid film was also prepared. The morphology of hydrotalcite and the nanocomposite studied by transmission electron microscopy indicated the layered structures with respectively 1.2 +/- 0.3 and 3.2 +/- 0.5 nm repeating distances. The hybrid Langmuir films displayed the occupied surface area of 0.24 nm2 for both hydrotalcite and the nanocomposite. The formation of hybrid Langmuir films was confirmed by Brewster angle microscopy. Atomic force microscopic images of hybrid LB films revealed the formation of plateau domains with the height difference of 6 nm for hydrotalcite and 12 nm for the nanocomposite and the presence of dendrimers adsorbed on the clay surface of the nanocomposite.     

A generalized scale of free energy of excess adsorption of solute and absolute composition of the interfacial phase

Moles of a surfactant (gamma2(1)) absorbed per unit area of the solid-liquid interface estimated analytically from the difference of the solute molality in the bulk phase before and after adsorption have been quantitatively related to the absolute compositions deltan1 and deltan2 of the solvent and solute forming the inhomogeneous surface phase in contact with the bulk phase of homogeneous composition. By use of isopiestic experiments, negative values of gamma2(1) for the adsorption of inorganic salts onto a solid-liquid interface have been calculated in the same manner. From the linear plot of gamma2(1) versus the ratio of the bulk mole fractions of the solute and solvent, values of deltan1 and deltan2 have been evaluated under a limited range of concentrations. For the adsorption of the surfactant and the inorganic salt respectively onto the fluid interface, gamma2(1) values have been evaluated from the surface tension concentration data using the Gibbs adsorption equation. Gamma2(1) based on the arbitrary placement of the Gibbs dividing plane near the fluid interface is quantitatively related to the composition of the inhomogeneous surface phase. Also, the Gibbs equation for multicomponent solutions has been appropriately expressed in terms of a suitably derived coefficient m. Integrating the Gibbs adsorption equation for a multicomponent system, the standard free energy change, deltaG degrees, per unit of surface area as a result of the maximum adsorption gamma2(m) of the surfactant at fluid interfaces due to the change of the activity alpha2 of the surfactant in the bulk from zero to unity have been calculated. A similar procedure has been followed for the calculation of deltaG degrees for the surfactant adsorption at solid-liquid interfaces using thermodynamically derived equations. deltaG degrees values for surfactant adsorption for all such systems are found to be negative. General expressions of deltaG degrees for negative adsorption of the salt on fluid and solid-liquid interfaces respectively have also been derived on thermodynamic grounds. deltaG degrees for all such systems are positive due to the excess spontaneous hydration of the interfacial phase in the presence of inorganic salt. Negative and positive values of deltaG degree for excess surfactant and salt adsorption respectively have been discussed in light of a generalized scale of free energy of adsorption.     

Preparation of hemispherical polymer particles via phase separation induced by microsuspension polymerization

Micrometer-sized, hemispherical polystyrene (PS) particles were successfully prepared by microsuspension polymerization of homogeneous styrene/hexadecane (HD) droplets dispersed in polyoxyethylene nonylphenyl ether (Emulgen 931) aqueous solution, followed by rapid removal of HD from formed PS/HD particles with a “Janus” structure. It was important for the formation of the morphology of Janus particles in thermodynamically stable state to carry out the polymerization slowly. The formation of by-product small PS particles by emulsion polymerization was suppressed by the additions of CuCl₂ as a water-soluble inhibitor and NaCl to decrease the solubility of styrene in the aqueous phase.     

Advantages of immobilization of Pt nanoparticles protected by dendrimers on multiwalled carbon nanotubes

Pt nanoparticles (PtNPs) were synthesized in the presence of a NH(2)-terminated fourth generation poly(amido amine) (PAMAM) dendrimer as a stabilizer at different molar ratios (M:D) of metal precursor to amine terminal group of dendrimer. Subsequently, PtNPs protected by dendrimers (DENPtNPs) were covalently immobilized on multiwalled carbon nanotubes (MWCNTs) by using a condensing agent for amide bond formation between acid-treated MWCNTs and DENPtNPs and the product CNT/DENPtNPs were characterized. PtNPs on MWCNTs increased quantitatively in content with M:D and dispersed with same aspect as the dispersion of DENPtNPs in water: PtNPs homogeneously dispersed at low M:D ratio and slightly aggregated at high ratio. The decomposition of CNT/DENPtNPs occurred at the lower temperature owing to the catalytic effect of PtNPs. A near-infrared absorption band around 2083 nm, which is extremely weak for MWCNTs, was intensified and D, D' and G Raman bands were slightly downshifted when DENPtNPs were attached. These phenomena can be attributed to the electron transfer from DENPtNPs to MWCNTs. Remarkable advantage is apparent from the enhanced electrochemical behavior of CNT/DENPtNPs loaded on gold electrode. PtNPs promoted the electron transfer of MWCNTs and dendrimers contributed to uptake of redox materials.     

Dye-sensitized solar cells based on donor-π-acceptor fluorescent dyes with a pyridine ring as an electron-withdrawing-injecting anchoring group

A new‐type of donor–acceptor π‐conjugated (D‐π‐A) fluorescent dyes NI3 – NI8 with a pyridine ring as electron‐withdrawing‐injecting anchoring group have been developed and their photovoltaic performances in dye‐sensitized solar cells (DSSCs) are investigated. The short‐circuit photocurrent densities and solar energy‐to‐electricity conversion yields of DSSCs based on NI3 – NI8 are greater than those for the conventional D‐π‐A dye sensitizers NI1 and NI2 with a carboxyl group as the electron‐withdrawing anchoring group. The IR spectra of NI3 – NI8 adsorbed on TiO₂ indicate the formation of coordinate bonds between the pyridine ring of dyes NI3 – NI8 and the Lewis acid sites (exposed Tiⁿ⁺ cations) of the TiO₂ surface. This work demonstrates that the pyridine rings of D‐π‐A dye sensitizers that form a coordinate bond with the Lewis acid site of a TiO₂ surface are promising candidates as not only electron‐withdrawing anchoring group but also electron‐injecting group, rather than the carboxyl groups of the conventional D‐π‐A dye sensitizers that form an ester linkage with the Brønsted acid sites of the TiO₂ surface.     

Preparation of disk-like cellulose particles

Disk-like cellulose particles were facilely prepared by stirring a dispersion of spongy cellulose particles that were prepared with a solvent-releasing method (SRM) with a magnetic stir bar. The obtained particles were thick and disk-like and retained their spongy structure in the wet state. The thick, disk-like particles became thinner in a specific direction upon drying because of capillary force. In contrast, when the same procedure was conducted using cellulose particles with dense structures, the particle shapes were not deformed, and disk-like shapes did not appear. Moreover, when the stirring was carried out using a shaking bath or a touch mixer, the shape transformation was not observed. These results suggest that the spongy structure of the cellulose particles would be a pseudo-plasticization state, which can cause the cellulose particles to deform. The disk-like particles formed as a result of the grinding of spongy cellulose particles between the stir bar and the vial. The number of disk-like particles and the degree of deformation increased with increasing of the stirring time, the speed and the contact area.     

Detection of water in organic solvents by photo-induced electron transfer method

A new class of fluorescence sensor for detection of water in organic solvents based on photo-induced electron transfer (PET) of anthracene coupled with an amino acid has been designed and developed.     

Synthesis and characterization of poly(ethyleneimine) dendrimers

Poly(ethyleneimine) (PEI) dendrimers up to the third generation (G3) were prepared by a divergent synthesis method from an ethylenediamine (EDA) core. The amine terminals were bonded with vinylbromide by a Michael addition reaction. Then, the bromide terminals were converted to amine groups using a Gabriel amine synthesis method. PEI dendrimers displayed pH-dependent luminescence, and their emission intensities at pH 6 increased over time. Fluorescence intensities also increased with increasing dendrimer generation from G1 to G3. Air-bubbling in aqueous solutions of dendrimers made to incorporate detectable amount of oxygen in dendrimers. EDA also behaved similarly in luminescence and oxygen incorporation.

Electrochemical properties of protoporphyrin IX zinc(II) films

The electrochemical properties of protoporphyrin IX zinc(II) (ZnPP) films on indium-tin oxide (ITO) substrate have been studied for three types of films with different arrangements, which were an adsorbed film of ZnPP and LB films of ZnPP and its hybrid with hexadecyltrimethylammonium bromide. Cyclic voltammetry (CV) measurement showed that, as the adsorbed amount of ZnPP increases, an irreversible oxidation peak of ZnPP film is intensified. This reveals that electrochemical properties depend on the adsorbed amount rather than the orientation of porphyrin molecules. It was also supported from CV measurement and ultraviolet-visible absorption spectroscopy that porphyrins adsorbed on ITO substrate were desorbed after the single scan of potential. Additionally, photoresponse of these ZnPP films was investigated by photocurrent measurement. The photocurrent generation is due to carboxylic acid moieties but not ZnPP macrocycles.     

Novel amphiphilic linear polymer/dendrimer block copolymer: Synthesis of poly(2-methyl-2-oxazoline)-block-poly(amido amine) dendrimer

Novel linear polymer/dendrimer block copolymers, poly(2-methyl-2-oxazoline)-block-poly(amido amine) dendrimers (water-soluble full-generation type 4 (G = 4.0 and 5.0) and amphiphilic half-generation type 5 (G = 3.5, 4.5, and 5.5)), were synthesized by divergent-growth dendrimer construction with ω-ethylenediamine-terminated poly(2-methyl-2-oxazoline), which was prepared by living ring-opening polymerization of 2-methyl-2-oxazoline. Assembly of the amphiphilic dendrimer-based block copolymer (G = 5.5) was investigated by surface tension measurements (critical micelle concentration, 0.49 wt.-%) and by small-angle neutron scattering analysis (spherical particles; assembled number, ca. 10³).