Liquid structure of room-temperature ionic liquid, 1-Ethyl-3-methylimidazolium bis-(trifluoromethanesulfonyl) imide

The liquid structure of 1-ethyl-3-methylimidazolium bis-(trifluoromethanesulfonyl) imide (EMI(+)TFSI(-)) has been studied by means of large-angle X-ray scattering (LAXS), (1)H, (13)C, and (19)F NMR, and molecular dynamics (MD) simulations. LAXS measurements show that the ionic liquid is highly structured with intermolecular interactions at around 6, 9, and 15 A. The intermolecular interactions at around 6, 9, and 15 A are ascribed, on the basis of the MD simulation, to the nearest neighbor EMI(+)...TFSI(-) interaction, the EMI(+)...EMI(+) and TFSI(-)...TFSI(-) interactions, and the second neighbor EMI+...TFSI(-) interaction, respectively. The ionic liquid involves two conformers, C(1) (cis) and C(2) (trans), for TFSI(-), and two conformers, planar cis and nonplanar staggered, for EMI(+), and thus the system involves four types of the EMI(+)...TFSI(-) interactions in the liquid state by taking into account the conformers. However, the EMI(+)...TFSI(-) interaction is not largely different for all combinations of the conformers. The same applies alsoto the EMI(+)...EMI(+) and TFSI(-)...TFSI(-) interactions. It is suggested from the 13C NMR that the imidazolium C(2) proton of EMI(+) strongly interacts with the O atom of the -SO(2)(CF(3)) group of TFSI(-). The interaction is not ascribed to hydrogen-bonding, according to the MD simulation. It is shown that the liquid structure is significantly different from the layered crystal structure that involves only the nonplanar staggered EMI(+) and C(1) TFSI(-) conformers.     

Study of the factors affecting the photoelectrode characteristics of a perylene/phthalocyanine bilayer working in the water phase

Some types of phthalocyanines (MPc (M = H(2), Cu, or Zn), a p-type semiconductor) were used in combination with 3,4,9,10-perylenetetracarboxyl-bisbenzimidazole (PTCBI, an n-type semiconductor), with which those photoelectrode characteristics in the water phase were investigated in terms of kinetics. Each film of the PTCBI/MPc bilayer functioned as a photoanode, where the photoinduced oxidation of thiol occurs at the MPc/water interface along with the hole conduction through the MPc layer. The holes originate on account of the photophysical events in the p/n interior, involving the charge separation of excitons at the p/n interface. The typical photoelectrochemical characteristic in the PTCBI/MPc photoanodes involved a transient photocurrent occurring in the initial stage under illumination (under potentiostatic conditions): thereafter, it attained a steady state. Moreover, both the initial spiky photocurrents and the steady-state photocurrents exhibited saturation at higher concentrations. An analysis with photoelectrode kinetics was performed by assuming an adsorption step prior to a rate-limiting charge transfer step, where equations were applied to photocurrents based on the Langmuir adsorption equilibrium. The kinetic analyses evidently showed that the photoanodic reactions are kinetically dominated by the charge transfer between MPc and thiol, where the overall kinetics for thiol oxidation decreases in the following order: H(2)Pc > ZnPc > CuPc; that is, it appeared that H(2)Pc acts as the more efficient photofunctional interface capable of oxidation in the water phase when PTCBI was concurrently employed as an electron conductor. Considering that the photocurrent generated is proportional to the surface concentration of thiol (Gamma) at the MPc as well as the intrinsic oxidation rate (cf., ZnPc > H(2)Pc approximately CuPc), the higher efficiency in the output at the H(2)Pc surface was attributed to an exceptionally high Gamma (i.e., from the kinetic analyses, the Gamma value at the H(2)Pc surface was also inferred to be 2-3 times higher than that at the other MPcs). Through the present kinetic analysis, it also revealed that the activity for thiol oxidation taking place at Pc ring is comparable to that at the conventional active catalysts (i.e., polycarboxyphthalocyaninato Co(ii) and Fe(iii)) where a central metal is an active site.     

Distribution and behavior of long-lived radioiodine in soil

The concentration of¹²⁹I in soil in Japan was determined by neutron activation analysis. For the activation analysis, pre-irradiation chemical separation of the iodine was carried out by acid decomposition and distillation and post-irradiation treatment was performed by ion exchange and solvent extraction. The concentration of stable iodine and¹³⁷Cs were also determined and compared with the behavior of¹²⁹I in soil.Soil samples from Ibaraki, Fukui, Fukushima, and Nagasaki Prefectures were analyzed and¹²⁹I was detected in amounts ranging from 10^–7 to 10^–5 Bq/g soil in uncultivated surface soil. There are apparently small variations in the¹²⁹I concentrations in each of the regions analyzed.From depth profile studies in sandy soil, the iodide form of¹²⁹I was found to migrate downward at a relatively rapid rate while other species remain longer in the surface soil.     

Combinatorial synthesis of MUC1 glycopeptides: polymer blotting facilitates chemical and enzymatic synthesis of highly complicated mucin glycopeptides

The chemoselective polymer blotting method allows for rapid and efficient synthesis of glycopeptides based on a "catch and release" strategy between solid-phase and water-soluble polymer supports. We have developed a heterobifunctional linker sensitive to glutamic acid specific protease (BLase). The general procedure consists of five steps, namely (i) the solid-phase synthesis of glycopeptide containing BLase sensitive linker, (ii) subsequent deprotections and the release of the glycopeptide from the resin, (iii) chemoselective blotting of the glycopeptide intermediates in the presence of water-soluble polymers with oxylamino functional groups, (iv) sugar elongations using glycosyltransferases, and (v) the release of target glycopeptides from the polymer platform by selective BLase promoted hydrolysis. The combined use of the solid-phase chemical syntheses of peptides and the enzymatic syntheses of carbohydrates on water-soluble polymers would greatly contribute to the production of complicated glycopeptide libraries, thereby enhancing applicative research. We report here a high-throughput synthetic system for the various types of MUC1 glycopeptides exhibiting a variety of sugar moieties. It is our belief that this concept will become part of the entrenched repertoire for the synthesis of biologically important glycopeptides on the basis of glycosyltransferase reactions in automated and combinatorial syntheses.     

Analysis of conjugated linoleic acids as 9-anthrylmethyl esters by reversed-phase high-performance liquid chromatography with fluorescence detection

A simple and highly sensitive method for determining the fatty acid composition of food lipids containing conjugated linoleic acid (CLA) is described. The method is based on the separation of the 9-anthrylmethyl ester derivatives of saturated and unsaturated (conjugated and non-conjugated) fatty acids by reversed-phase high-performance liquid chromatography with fluorescence detection. Just like the other fatty acids, CLA reacts readily with 9-anthryldiazomethane at room temperature to produce 9-anthrylmethyl esters without isomerization and decomposition of the conjugated double bonds. Clear resolution of the individual fatty acids as their 9-anthrylmethyl esters is achieved on a highly efficient octadecylsilylated silica column (150- x 3-mm i.d., 3-microm particle size) using a stepwise gradient elution with methanol-water. The method is standardized with commercially available CLA isomers (cis-9, trans-11 and trans-10, cis-12-octadecadienoic acids, and their cis,cis and trans,trans isomers) and applied for determination of the fatty acid compositions of milk and sdairy products.     

Catalyst design of hydrotalcite compounds for efficient oxidations

Various Mg-Al type hydrotalcites were examined as catalysts for the epoxidation of olefins and N-oxidation of pyridines using hydrogen peroxide. The catalytic activity of hydrotalcites increased with increasing the basicity of their surface. Adding cationic surfactants, e.g., n-dodecyltrimethylammonium bromide, to the above system remarkably accelerated the reaction rate. The hydrotalcites, into which were introduced both Ru and Co cations in the Brucite layers, were found to be good catalysts for the oxidation of various alcohols in the presence of molecular oxygen. Moreover, these hydrotalcites could smoothly catalyze also the oxygenation of diphenylmethane, fluorene, and xanthene at benzylic position with excellent yields. The hydrotalcite catalysts could be easily separated from the reaction mixture and reused with retention of their high catalytic performance for the above oxidations.     

IMEX Runge–Kutta schemes for reaction–diffusion equations

A fundamental research is carried out into convergence and stability properties of IMEX (implicit–explicit) Runge–Kutta schemes applied to reaction–diffusion equations. It is shown that a fully discrete scheme converges if it satisfies certain conditions using a technique of the B-convergence analysis, developed by Burrage, Hundsdorfer and Verwer in 1986. Stability of the schemes is also examined on the basis of a scalar test equation, proposed by Frank, Hundsdorfer and Verwer in 1997.