Hydrogen-bonded liquid crystals built from hydrogen-bonding donors and acceptors. Infrared study on the stability of the hydrogen bond between carboxylic acid and pyridyl moieties

Abstract

The stability of a hydrogen-bonded complex built through inter-molecular hydrogen bonding between carboxylic acid and pyridine fragments has been examined using infrared spectroscopy. Infrared spectra as a function of temperature have been recorded for the 1:1 complex of 4-hexyloxybenzoic acid and trans-4-propoxy-4′-stilbazole from the crystalline state to the isotropic state. A dependence of the stability of the hydrogen bond on molecular orientation is observed clearly in the infrared spectra. The spectra also suggest that the hydrogen bond is an unionized type with a double minimum potential energy.     

Photochromic chiral liquid crystalline systems containing spiro-oxazine with a chiral substituent I. Synthesis and characterization of compounds

Photochromic acrylates containing both biphenylene and spiro-oxazine moieties with a chiral substituent and the related polymers were prepared and yielded photochromic chiral liquid crystalline systems. The photochromic acrylates containing both an undecamethylene group and a (2S, 3S)-2-chloro-3-methylpentanoyloxy group (A11SOP) or a (-)-menthoxyacetoxy group (A11SOM) gave a supercooled mesophase; the latter reflected right-handed visible light (blue colour) at room temperature. On the other hand, the photochromic acrylate containing both the (R)-(-)-2-methylpropylene and (2S, 3S)-2-chloro-3-methylpentanoyloxy groups (A3SOP) showed no mesophase. The related homopolymers, PA11SOP and PA11SOM, did not exhibit mesophases because of steric hindrance between the side groups of the polymers. However, only PA11SOM exhibited shear-induced birefringence under 100-104°C. Several copolymers consisting of the nematogenic monomer, 4-[4-(6-acryloyloxyhexyloxy)benzoyloxy]benzonitrile (A6CN), and A11SOP or A11SOM possessed a smectic phase due to reduction of the steric hindrance between the potentially smectogenic A11SOP or A11SOM moieties.     

Characterization of flower-inducing compound in Lemna paucicostata exposed to drought stress

A flower-inducing compound, LDS1, was isolated from a free-floating aquatic plant, Lemna paucicostata. The chemical structure and the absolute stereochemistry of LDS1 were determined as (9R,13R,11E,15Z)-9,13-dihydroxy-10-oxooctadeca-11,15-dienoic acid for its most abundant diastereomer. LDS1 was enzymatically produced when the plant was exposed to drought stress, and induced flowering at a concentration of 10 nM.     

Selective hydrogen peroxide oxidation of sulfides to sulfoxides or sulfones with MWW-type titanosilicate zeolite catalyst under organic solvent-free conditions

Selective oxidation of sulfides to sulfoxides and sulfones with hydrogen peroxide under organic solvent-free conditions was demonstrated by the MWW-type titanosilicate zeolite catalyst. Sulfides were oxidized smoothly to give sulfoxides with good selectivities at ambient temperature using 1.0–1.2 equiv of hydrogen peroxide with the MWW-type titanosilicate zeolite catalyst. Especially, the Ti-MWW with an interlayer-expanded structure (Ti-IEZ-MWW) catalyst showed high activity with good chemoselectivity for the oxidation of various sulfides. The catalyst is recyclable for at least five cycles, and the only byproduct is water. Sulfides were directly oxidized to give sulfones in high yields by 2.5 equiv of hydrogen peroxide with the MWW-type titanosilicate zeolite catalyst under organic solvent-free conditions.     

The Surface Analysis Working Group at the Consultative Committee for Amount of Substance,Metrology in Chemistry and Biology: A successful initiative by Martin Seah

Dr Martin Seah, NPL, was the initiator, founder, and first chairman of the Surface Analysis Working Group (SAWG) at the Consultative Committee for Amount of Substance, Metrology in Chemistry and Biology (CCQM) at the Bureau International des Poids et Mesures (BIPM), the international organization established by the Metre Convention. This tribute letter summarizes his achievements during his chairmanship and his long-running impact on the successful work of the group after his retirement.     

Calorimetric evidence for a Fulde-Ferrell-Larkin-Ovchinnikov superconducting state in the layered organic superconductor kappa-(BEDT-TTF)2Cu(NCS)2

The specific heat of the layered organic superconductor kappa-(BEDT-TTF)(2)Cu(NCS)(2), where BEDT-TTF is bisethylenedithio-tetrathiafulvalene, has been studied in magnetic fields up to 28 T applied perpendicular and parallel to the superconducting layers. In parallel fields above 21 T, the superconducting transition becomes first order, which signals that the Pauli-limiting field is reached. Instead of saturating at this field value, the upper-critical-field increases sharply and a second first-order transition line appears within the superconducting phase. Our results give strong evidence that the phase, which separates the homogeneous superconducting state from the normal state is a realization of a Fulde-Ferrell-Larkin-Ovchinnikov state.     

Polymeric saturable-absorber mirror for passive Q-switching of a laser-diode-pumped Nd3+:YVO4 microchip laser

A polymeric multilayered mirror doped with a saturable dye worked as a passive Q-switch of a laser-diode-pumped Nd(3+):YVO4 microchip laser. The multilayered mirror consisted of alternately spin-coated layers of polyvinylcarbazole (PVK) and cellulose acetate on a glass substrate. A dye of bis-(dimethylaminodithiobenzil)-nickel was doped in one of the layers of PVK, providing the repetitively Q-switched pulses. The pulse width and repetition rate were 4 ns and 68 kHz, respectively, for a laser-cavity length of 5 mm, and the average and the peak power were 40 mW and 156 W, respectively, for the highest pump power of 435 mW. The dependence of the Q-switched characteristics on the pump power and on the concentration of the doped dye is described.     

Bleaching effect of a 405-nm diode laser irradiation used with titanium dioxide and 3.5% hydrogen peroxide

A 405-nm diode laser has recently been developed for soft tissue problems in dentistry. A new in-office bleaching agent consisting of a titanium dioxide photocatalyst and 3.5% hydrogen peroxide has proven to react well with light irradiated at a wavelength of around 400 nm. In this study, we evaluated the bleaching efficacy of a newly developed 405-nm diode laser on bovine teeth treated with a bleaching agent composed of titanium dioxide and 3.5% hydrogen peroxide. Sixteen bovine incisors were randomly divided into two groups: Group A, irradiated by the 405-nm diode laser at 200 mW; Group B, irradiated by the 405-nm diode laser at 400 mW. The bleaching agent with titanium dioxide and 3.5% hydrogen peroxide was applied to bovine enamel and irradiated for 1 min. The specimens were then washed and dried, and the same procedure was repeated nine more times. After irradiation, we assessed the effects of bleaching on the enamel by measuring the color of the specimens with a spectrophotometer and examining the enamel surfaces with a scanning electron microscope. L* rose to a high score, reaching a significantly higher post-treatment level in comparison to pretreatment. In a comparison of the color difference (ΔE) between Group A and Group B, the specimens in Group B showed significantly higher values after 10 min of irradiation for the post-treatment. No remarkable differences in the enamel surface morphology were found between the unbleached and bleached enamel. The use of a 405-nm diode laser in combination with a bleaching agent of titanium dioxide and 3.5% hydrogen peroxide may be an effective method for bleaching teeth without the risk of tooth damage.     

Synthesis of optically inactive cellulose via cationic ring-opening polymerization

Cellulose, which comprises D-glucose and L-glucose (D,L-cellulose), was synthesized from D-glucose (1D) and L-glucose (1L) via cationic ring-opening polymerization. Specifically, the ring-opening copolymerization of 3-O-benzyl-2,6-di-O-pivaloyl-β-D-glucopyranoside (2D) and 3-O-benzyl-2,6-di-O-pivaloyl-β-D-glucopyranoside (2L), synthesized from compounds 1D and 1L, respectively, in a 1:1 ratio, afforded 3-O-benzyl-2,6-di-O-β-D,L-glucopyranan (3DL) with a degree of polymerization (DPn) of 28.5 (Mw/Mn?=?1.90) in quantitative yield. The deprotection of compound 3DL and subsequent acetylation proceeded smoothly to afford acetylated compound 4DL with a DPn of 18.6 (Mw/Mn?=?2.08). The specific rotation of acetylated compound 4DL was?+?0.01°, suggesting that acetylated compound 4DL was optically inactive cellulose triacetate. Furthermore, before acetylation, compound 4DL was an optically inactive cellulose comprising an almost racemic mixture of D-glucose and L-glucose. Compound 4DL was an amorphous polymer. This is the first reported synthesis of optically inactive D,L-cellulose.