Modular Synthesis of Polybenzo[b]silole Compounds for Hole‐Blocking Material in Phosphorescent Organic Light Emitting Diodes

A diversity‐oriented synthetic strategy allowed us to design a series of conjugated molecules containing multiple benzosilole units that can be utilized as efficient hole‐blocking materials for phosphorescent organic light emitting diodes (OLEDs). Some of these compounds showed a performance surpassing that of the current standard, bathocuproine. The new compounds were easily synthesized in a modular fashion from a previously reported 3‐stannyl benzosilole building unit. Studies on the properties of these compounds in solution and in the solid state indicate that they possess high electron affinity, high ionization potential, and form stable amorphous films that show high electron‐drift mobility. The correlation between their molecular properties and the efficiency of the OLED device performance is also investigated.     

Potential-modulated fluorescence spectroscopy of the membrane potential-sensitive dye di-4-ANEPPS at the 1,2-dichloroethane/water interface

The spectrofluorometric behavior of a membrane potential-sensitive dye, 1-(3-sulfonatopropyl)-4-[β-{2-(di-N-butylamino)-6-naphthyl}vinyl]pyridinium betaine (di-4-ANEPPS), at the polarized 1,2-dichloroethane/water interface was studied by means of potential-modulated fluorescence (PMF) spectroscopy. The results, combined with those from cyclic and alternating current voltammetry, clearly suggested that the dye adsorbed at the interface underwent a reorientation with increasing the interfacial potential, giving a well-developed PMF response as well as a voltammetric response. In addition to the PMF response, another PMF response was observed by addition of dilauroyl phosphatidylcholine (DLPC). This additional response was well explained in terms of a reorientation of di-4-ANEPPS at the interface, which would be induced by the potential-dependent desorption of DLPC from the interface. Thus, the present study supported the reorientation/solvatochromic mechanism for the membrane potential-sensitive dye rather than the electrochromic mechanism.     

Complexation of acyclic ligands having two terminal quinoline units with alkali metal cations

Abstract

Acyclic multidentate ligands consisting of an oligooxyethylene chain (di-, tri-, tetra-, and penta-) and two terminal rigid quinaldate end groups were newly prepared and their complexation properties with alkali metal cations were estimated by the solvent extraction method to indicate a better affinity for K⁺. Among them, the tetraethylene glycol derivative showed the highest K⁺ binding on about the same level as 18-crown-6. Their conformations in solution and in the solid state were examined by using ¹H- and ¹³C-NMR spectroscopy and X-ray crystal analyses, respectively. The better binding of K⁺ in comparison with the corresponding glymes or analogues having the same donor sites was reasonably explained by considering the effective co-ordination of the carbonyl oxygen of the ester groups and the parallel π-stacking interaction between two quinaldate surfaces.     

Practical synthesis of S-alkyl thiocarbamate herbicides by carbonylation of amines with carbon monoxide and sulfur

An industrial and economic carbonylation of amines with carbon monoxide and sulfur has been developed for the synthesis of S-alkyl thiocarbamate herbicides. In the presence of potassium carbonate and solvent DMSO, S-alkyl thiocarbamates, such as thiobencarb and orbencarb (herbicides) are synthesized in excellent yields from amines, carbon monoxide, sulfur, and alkyl halides under mild conditions (1 atm, 20 °C).     

Synthesis of N3-substituted uridine and related pyrimidine nucleosides and their antinociceptive effects in mice

Seventy eight N(3)-substituted derivatives of uridine (1), thymidine (2), 2'-deoxyuridine (3), 6-azauridine (4), 2',3'-O-isopropylideneuridine (5), and arabinofuranosyluracil (6) were synthesized and their antinociceptive effects were evaluated. N(3)-(2',4'-Dimethoxyphenacyl)uridine (1l), N(3)-(2',4'-dimethoxyphenacyl)2'-deoxyuridine (3l), and N(3)-(2',5'-dimethoxyphenacyl)arabinofuranosyluracil (6m) possessed 93, 86, and 82% of the antinociceptive effects tested by hot plate, respectively. The antinociceptive effects of three derivatives were 5.8, 5.4, and 5.1-folds of the effect of N(3)-phenacyluridine (1h) (16%), respectively. The structure-activity relationship of N(3)-substituted pyrimidine nucleosides was also discussed.     

Effect of interfacial proteins on osteoblast-like cell adhesion to hydroxyapatite nanocrystals

A quartz crystal microbalance with dissipation (QCM-D) technique was employed to detecting the protein adsorption and subsequent osteoblast-like cell adhesion to hydroxyapatite (HAp) nanocrystals. The interfacial phenomena with the preadsorption of three proteins (albumin (BSA), fibronectin (Fn), and collagen (Col)), the subsequent adsorption of fetal bovine serum (FBS), and the adhesion of the cells were investigated. The QCM-D measured the frequency shift (Δf) and dissipation energy shift (ΔD), and the viscoelastic properties of the adlayers were evaluated using ΔD-Δf plot and Voigt-based viscoelastic model. The Col adsorption significantly showed higher Δf, ΔD, elasticity, and viscosity values as compared to the BSA and Fn adsorption, and the subsequent FBS adsorption depended on the preadsorbed proteins. The ΔD-Δf plot of the cell adhesion also showed a different behavior depending on the surfaces, and the Fn- and Col-modified surfaces showed the rapid mass and ΔD changes by forming the viscous interfacial layers with cell adhesion, indicating that the processes were affected by the cellular reaction through the extracellular matrix (ECM) proteins. The confocal laser scanning microscope images of adherent cells showed a different morphology and pseudopod on the surfaces. The cells adhered to the surfaces modified with the Fn and Col had significantly uniaxially expanded shapes and fibrous pseudopods, and those modified with the BSA had a round shape. Therefore, the different cell-protein interactions would cause the arrangement of the ECM and the cytoskeleton changes at the interfaces, and these phenomena were successfully detected by the QCM-D and Voigt-based model.     

Detection of interfacial phenomena with osteoblast-like cell adhesion on hydroxyapatite and oxidized polystyrene by the quartz crystal microbalance with dissipation

The adhesion process of osteoblast-like cells on hydroxyapatite (HAp) and oxidized polystyrene (PSox) was investigated using a quartz crystal microbalance with dissipation (QCM-D), confocal laser scanning microscope (CLSM), and atomic force microscope (AFM) techniques in order to clarify the interfacial phenomena between the surfaces and cells. The interfacial viscoelastic properties (shear viscosity (η(ad)), elastic shear modulus (μ(ad)), and tan δ) of the preadsorbed protein layer and the interface layer between the surfaces and cells were estimated using a Voigt-based viscoelastic model from the measured frequency (Δf) and dissipation shift (ΔD) curves. In the ΔD-Δf plots, the cell adhesion process on HAp was classified as (1) a mass increase only, (2) increases in both mass and ΔD, and (3) slight decreases in mass and ΔD. On PSox, only ΔD increases were observed, indicating that the adhesion behavior depended on the surface properties. The interfacial μ(ad) value between the material surfaces and cells increased with the number of adherent cells, whereas η(ad) and tanδ decreased slightly, irrespective of the surface. Thus, the interfacial layer changed the elasticity to viscosity with an increase in the number. The tan δ values on HAp were higher than those on PSox and exceeded 1.0. Furthermore, the pseudopod-like structures of the cells on HAp had periodic stripe patterns stained with a type I collagen antibody, whereas those on PSox had cell-membrane-like structures unstained with type I collagen. These results indicate that the interfacial layers on PSox and HAp exhibit elasticity and viscosity, respectively, indicating that the rearrangements of the extracellular matrix and cytoskeleton changes cause different cell-surface interactions. Therefore, the different cell adhesion process, interfacial viscoelasticity, and morphology depending on the surfaces were successfully monitored in situ and evaluated by the QCM-D technique combined with other techniques.     

Stereochemistry and mechanism of catalytic hydrogenation of substituted cyclohexanones

Substituted alkylcyclohexanones were hydrogenated over several transition metal catalysts. The hydrogenation with freshly prepared Raney Ni gave predominantly the axial alcohols but catalyst to which sodium hydroxide was added or aged catalyst increased the stereoselectivity. In contrast to the PtO₂ hydrogenation in which the equatorial alcohols were favoured, more axial alcohols were obtained than the equatorial counterparts on Pt-black. On Pd catalyst the isomeric ratios of the cyclohexanols changed as the reaction progressed. This may be due to a decrease in the amount of hydrogen available caused by the strong adsorption of ketones on the catalyst. Rh catalyst gave more of the axial alcohols than any other catalyst used in the present study.     

Regulation of geometry around the ruthenium center of bis(2-pyridinecarboxylato) complexes by the nitrosyl moiety: syntheses, structures, and theoretical studies

cis-[Ru(NO)Cl(pyca)(2)] (pyca = 2-pyridinecarboxylato), in which the two pyridyl nitrogen atoms of the two pyca ligands coordinate at the trans position to each other and the two carboxylic oxygen atoms at the trans position to the nitrosyl ligand and the chloro ligand, respectively (type I shown as in Chart 1), reacted with NaOCH(3) to generate cis-[Ru(NO)(OCH(3))(pyca)(2)] (type I). The geometry of this complex was confirmed to be the same as the starting complex by X-ray crystallography: C(13.5)H(13)N(3)O(6.5)Ru; monoclinic, P2(1)/n; a = 8.120(1), b = 16.650(1), c = 11.510(1) A; beta = 99.07(1) degrees; V = 1536.7(2) A(3); Z = 4. The cis-trans geometrical change reaction occurred in the reactions of cis-[Ru(NO)(OCH(3))(pyca)(2)] (type I) in water and alcohol (ROH, R = CH(3), C(2)H(5)) to form [[trans-Ru(NO)(pyca)(2)](2)(H(3)O(2))](+) (type V) and trans-[Ru(NO)(OR)(pyca)(2)] (type V). The reactions of the trans-form complexes, trans-[Ru(NO)(H(2)O)(pyca)(2)](+) (type V) and trans-[Ru(NO)(OCH(3))(pyca)(2)] (type V), with Cl(-) in hydrochloric acid solution afforded the cis-form complex, cis-[Ru(NO)Cl(pyca)(2)] (type I). The favorable geometry of [Ru(NO)X(pyca)(2)](n)(+) depended on the nature of the coexisting ligand X. This conclusion was confirmed by theoretical, synthetic, and structural studies. The mono-pyca-containing nitrosylruthenium complex (C(2)H(5))(4)N[Ru(NO)Cl(3)(pyca)] was synthesized by the reaction of [Ru(NO)Cl(5)](2)(-) with Hpyca and characterized by X-ray structural analysis: C(14)H(24)N(3)O(3)Cl(3)Ru; triclinic, Ponemacr;, a = 7.631(1), b = 9.669(1), c = 13.627(1) A; alpha = 83.05(2), beta = 82.23(1), gamma = 81.94(1) degrees; V = 981.1(1) A(3); Z = 2. The type II complex of cis-[Ru(NO)Cl(pyca)(2)] was synthesized by the reaction of [Ru(NO)Cl(3)(pyca)](-) or [Ru(NO)Cl(5)](2)(-) with Hpyca and isolated by column chromatography. The structure was determined by X-ray structural analysis: C(12)H(8)N(3)O(5)ClRu; monoclinic, P2(1)/n; a = 10.010(1), b = 13.280(1), c = 11.335(1) A; beta = 113.45(1) degrees; V = 1382.4(2) A(3); Z = 4.     

New resveratrol oligomers in the stem bark of Vatica pauciflora

Five new resveratrol oligomers; pauciflorols A-C (1-3), isovaticanols B (6) and C (8), and three new oligostilbene glucosides; pauciflorosides A (11), B (13), C (14), were isolated from the stem bark of Vatica pauciflora (Dipterocarpaceae) together with known 17 resveratrol oligomers (4, 5, 7, 9, 10, 12 and 15-25) and bergenin (26). The structures of isolates were established on the basis of detailed spectroscopic analysis. The typical and characteristic spectral properties of some resveratrol oligomers were also discussed.