Effect of poly(butylene succinate) crystals on spherulitic growth of poly(ethylene oxide) in binary blends of the two substances

The effects of the lamellar growth direction, extinction rings, and spherulitic boundaries of poly(butylene succinate) (PBSU) on the spherulitic growth of poly(ethylene oxide) (PEO) were investigated in miscible blends of the two crystalline polymers. In the crystallization process from a homogeneous melt, PBSU first developed volume‐filling spherulites, and then PEO spherulites nucleated and grew inside the PBSU spherulites. The lamellar growth direction of PEO was identical with that of PBSU even when the PBSU content was about 5 wt %. PEO, which intrinsically does not exhibit banded spherulites, showed apparent extinction rings inside the banded spherulites of PBSU. The growth rate of a PEO spherulite, G_PEO, was influenced not only by the blend composition and the crystallization temperature of PEO, but also by the growth direction with respect to PBSU lamellae, the boundaries of PBSU spherulites, and the crystallization temperature of PBSU, T_PBSU. The value of G_PEO first increased with decreasing T_PBSU when a PEO spherulite grew inside a single PBSU spherulite. Then, G_PEO decreased when T_PBSU was further decreased and a PEO spherulite grew through many tiny PBSU spherulites. This behavior was discussed based on the aforementioned factors affecting G_PEO. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 539–547, 2009     

Mössbauer spectroscopic study of photo-sensitive organic–inorganic hybrid system, (SP)[Fe(II)Fe(III)(dto)3](dto = C2O2S2, SP = spiropyran)

A photo-sensitive organic–inorganic hybrid system (SP)[Fe^IIFe^III(dto)₃] (SP = spiropyran, dto = C₂O₂S₂), has recently been developed, where the photo-isomerization of the intercalated spiropyran in solid state triggers the change of the magnetic properties, including the ferromagnetic transition temperature from 5 to 22 K. We performed ⁵⁷Fe Mössbauer measurement in order to probe the microscopic states of iron ions in (SP)[Fe^IIFe^III(dto)₃] and have investigated the photo-induced effect on them. The sample without UV-irradiation shows the charge transfer phase transition between 200 and 70 K and the higher and lower temperature phases coexist below 70 K, whereas the UV-irradiated sample does not undergo the charge transfer phase transition and the higher temperature phase is stable between 200 and 6 K.     

Synthesis and reactions of benzopentathiepin having hydroxyl group

The synthesis of benzopentathiepin having a hydroxyl group at the neighboring position of polysulfur ring was performed by demethylation of 6-ethyl-9-methoxybenzopentathiepin with hydrogenbromide. Benzotrithiole having hydroxyl group was not isolated at all. The hydroxyl group was also alkylated with alkyl iodide in the presence of weak base.     

Thermophilic Dry Methane Fermentation of Distillation Residue Eluted from Ethanol Fermentation of Kitchen Waste and Dynamics of Microbial Communities

Thermophilic dry methane fermentation is advantageous for feedstock with high solid content. Distillation residue with 65.1 % moisture content was eluted from ethanol fermentation of kitchen waste and subjected to thermophilic dry methane fermentation, after adjusting the moisture content to 75 %. The effect of carbon to nitrogen (C/N) ratio on thermophilic dry methane fermentation was investigated. Results showed that thermophilic dry methane fermentation could not be stably performed for >10 weeks at a C/N ratio of 12.6 and a volatile total solid (VTS) loading rate of 1 g/kg sludge/d; however, it was stably performed at a C/N ratio of 19.8 and a VTS loading rate of 3 g/kg sludge/d with 83.4 % energy recovery efficiency. Quantitative PCR analysis revealed that the number of bacteria and archaea decreased by two orders of magnitude at a C/N ratio of 12.6, whereas they were not influenced at a C/N ratio of 19.8. Microbial community analysis revealed that the relative abundance of protein-degrading bacteria increased and that of organic acid-oxidizing bacteria and acetic acid-oxidizing bacteria decreased at a C/N ratio of 12.6. Therefore, there was accumulation of NH₄ ⁺ and acetic acid, which inhibited thermophilic dry methane fermentation.     

Three-dimensional electronic structure in highly doped NaxCoO2 studied by angle-resolved photoemission spectroscopy

We have investigated three-dimensional electronic structure for Na_xCoO₂ (x=0.77 and 0.65) by high-resolution angle-resolved photoemission spectroscopy to study the origin of antiferromagnetic (AF) transition of highly doped Na_xCoO₂(x>0.75). The a_1g large hole-like Fermi surface (FS) in x=0.77 shows distinct three-dimensionality along the k_z direction, and a three-dimensional small electron pocket appears around Γ point, indicating strong inter-layer electronic correlation. On the other hand, x=0.65 sample does not show three-dimensional behavior. This result indicates that transition of FS as a function of band filling is closely related to the occurrence of the magnetic transition in highly doped Na_xCoO₂.     

Efficient decoherence-free entanglement distribution over lossy quantum channels

We propose and demonstrate a scheme for boosting the efficiency of entanglement distribution based on a decoherence-free subspace over lossy quantum channels. By using backward propagation of a coherent light, our scheme achieves an entanglement-sharing rate that is proportional to the transmittance T of the quantum channel in spite of encoding qubits in multipartite systems for the decoherence-free subspace. We experimentally show that highly entangled states, which can violate the Clauser-Horne-Shimony-Holt inequality, are distributed at a rate proportional to T.     

Pressure loading of detonation waves through 90-degree bend in high pressure H2–O2–N2 mixtures

Detonation experiments are conducted to investigate the detonation wave behavior in steam pipelines of boiling water reactors. Accumulated gases in BWRs are stoichiometric hydrogen/oxygen mixtures diluted with steam at 7 MPa. In the experiment, flammable gas mixture diluted with nitrogen at room temperature and up to 5 MPa is used to achieve equivalent detonation condition. Two test pieces are used, one is straight tube and the other is 90-degree bend. No initial pressure dependency in detonation wave behavior is observed in the experiments. However, in the straight tube tests, detonation velocities higher than theoretical values are measured when the initial pressures are greater than 2.3 MPa. This result is considered as attribution of real gas effect. In the 90-degree bend experiments, pressure time histories reveal pressure loads greater than the straight tube portion at two locations. One is a high pressure peak at the extrados of the bend and the other is a double pressure peak just downstream of the bend outlet. Second pressure peak just downstream of the bend outlet is due to transverse wave propagation. Additionally, the largest impulse is observed not at the extrados of the bend but at the intrados of bend outlet. These results show the importance of more investigations on transverse wave behaviors in failure potential evaluation.