Biomimetic transformations of germacradienes. Stereospecific conversion of hedycaryol phenyl sulfides to cadinanes

E,E- and 2Z,6E-hedycaryol phenyl sulfides were converted by [2.3]sigmatropy of their sulfoxides to the same allyl alcohol which in turn afforded cadinane derivatives stereospecifically by the action of acids.     

Photoluminescence and population analysis of single-walled carbon nanotubes produced by CVD and pulsed-laser vaporization methods

Band gap photoluminescence (PL) behaviors of single-walled carbon nanotubes (SWNTs) grown by the methods of chemical vapor deposition and pulsed-laser vaporization are investigated over the wide diameter range (≈0.8–1.4 nm). The peak intensity of the PL signals strongly depends on chirality and the ‘(2n + m) family type’ of SWNTs. Based on the PL results, a population analysis of these SWNTs is conducted by combining the calculated PL yields for each (n, m) tube. The results are directly compared with the histograms of diameter distributions estimated by the transmission electron microscope (TEM) observations to check the validity of the analysis.     

[2.2](2,6)Biphenylenophane and [2](2,6)Biphenyleno[2](2,6)naphthalenophane

Two cyclophanes, [2.2](2,6)biphenylenophane and [2](2,6)biphenyleno[2](2,6)naphthalenophane, were prepared.     

Microwave spectrum and the structure of benzoyl chloride

The microwave spectrum of benzoyl chloride was observed in the frequency range 12–18.6 GHz. Rotational constants have been obtained for the ground vibrational state, the first three excited torsional states of the COCl group, and one of the out-of-plane bending states. The residual inertial defect obtained from the ground and the torsional excited states indicates that the equilibrium conformation is planar. Ab initio MO calculations (STO-3G) showed the potential energy curve as a function of the COCl torsional angle to be rather flat around zero degrees.     

Transport property characterization of sparse CNT networks via AFM images

A simulation method for correlating the resistivity and resistance of sparse carbon nanotube (CNT) networks via atomic force microscopy images was proposed. For the demonstration, resistance values simulated by this method were compared with values obtained by directory measuring the resistance of sparse CNT networks. Results were also compared with those obtained by a thin-film approximation in which CNT networks are approximated as thin rectangles. Simulated resistance values were closer to the experimental values of the same samples than those estimated on the basis of the thin-film approximation. The use of atomic force microscopy (AFM) images enabled the implementation of inhomogeneity to numerical models, as well as one-to-one comparison between real samples and numerical models.     

CVD growth of single-walled carbon nanotubes with narrow diameter distribution over Fe/MgO catalyst and their fluorescence spectroscopy

Single-walled carbon nanotubes (SWNTs) with a narrow diameter distribution are synthesized by thermal chemical vapor deposition (CVD) of methane over Fe/MgO catalyst on the basis of parametric study considering Fe loading, reaction temperature and time, methane concentration, and structure of a support material. We found that the porous MgO support gives the SWNTs with a narrow diameter distribution with the mean diameter and standard deviation of 0.93 and 0.06 nm, respectively, only when the Fe loading and reaction temperature are relatively low. The higher Fe loading and/or the higher reaction temperature enlarged the nanotube diameter, forming double-walled carbon nanotubes (DWNTs) in addition to SWNTs. This result indicates that only the diameter of Fe nanoparticles determines the growth of either SWNTs or DWNTs on the MgO support. The fluorescence and absorption spectra of the nanotube dispersion in D(2)O solution with sodium dodecyl sulfate (SDS) were studied to identify their chirality distribution. The fluorescence of the uniform-diameter SWNTs indicates the formation of the near armchair structures. On the other hand, the SWNTs synthesized over the catalyst with a high Fe loading, 3 wt %, showed a wide chirality distribution including the near zigzag structure. The synthesis of the SWNTs with a narrow diameter distribution could be applied to the selection of SWNTs with a specific chirality based on postsynthesis separation.     

Photometric detection of cyclodextrins in liquid chromatography by using iodine generated electrochemically in-situ

A method has been developed for photometric detection of cyclodextrins (CD) in liquid chromatography using iodine (I₂) generated electrochemically in-situ. Iodide ion in the mobile phase was electrochemically oxidized to I₂ which was subsequently reacted with I^–, in an electrochemical flow cell, forming I₃^–. The absorbance of I₃^– was found to be greatly enhanced when CD were present in the mobile phase. The absorbance enhancement was caused by the change in the mole fraction of I₃^–, because of the inclusion reaction of I₃^– with CD. On the basis of this phenomenon, CD were detected by means of a photodiode-array UV–visible detector positioned downstream of the electrochemical flow cell. The signals were found to be linearly dependent on CD concentration. Because the formation constants of I₃^– with CD decrease in the order -CD>-CD>-CD, -CD was most detectable by the method. Detection limits were 1.0 mol L^–1 for -CD, 65 mol L^–1 for monoG1--CD, 100 mol L^–1 for -CD, and 200 mol L^–1 for -CD.     

Grafting of hyperbranched poly(amidoamine) onto carbon black surfaces using dendrimer synthesis methodology

To modify carbon black surface, the surface grafting of hyperbranched poly(amidoamine) onto the surface by using dendrimer synthesis methodology was investigated. Carbon black having amino groups (initiator sites) was prepared by the reduction of surface nitro groups introduced by nitration of aromatic rings. It was found that hyperbranched poly(amidoamine) was propagated from carbon black surface by repeating two processes: (1) Michael addition of methyl acrylate (MA) to surface amino groups and (2) amidation of the resulting esters with ethylenediamine: the percentage of poly(amidoamine) grafting reached to 96.2% after 10th‐generation. The grafting of hyperbranched poly(amidoamine) onto polystyrene‐bead as a model compound of carbon black was also achieved by the above procedures. However, the theoretical propagation of poly(amidoamine) dendrimer was not achieved, because of steric hindrance of grafted polymer. Hyperbranched poly(amidoamine)‐grafted carbon black gave a stable dispersion in a good solvent for poly(amidoamine). Copyright © 2001 John Wiley & Sons, Ltd.     

Competitive thermal ene reaction and Diels-Alder reactions of 2-[N-(alk-2-enyl)benzylamino]-3-vinylpyrido[1,2-a]pyrimidin-4(4H)-ones

Thermal reaction of 2-[N-(alk-2-enyl)benzylamino]-3-(2-substituted and 2,2-disubstituted)vinylpyrido[1,2-a]pyrimidin-4(4H)-ones gave azepine, the desired ene products, and/or pyran derivatives. The formation of the latter was responsible for the [4+2] cycloaddition reaction between the α,β-unsaturated ester carbonyl moiety as a diene part and the alkenylamino moiety as an ene one. The reaction features depended upon the kinds of substituents both on the vinyl and alkenyl counterparts; strongly electron-withdrawing substituents on the vinyl moiety or an electron-donating substituent on the alkenyl one changed the reaction feature from the ene reaction to the hetero Diels-Alder reaction.     

Stable immobilization of an oligonucleotide probe on a gold substrate using tripodal thiol derivatives

We proposed an interface molecule for immobilization of DNA probes on solid substrates of DNA chips. We have designed and synthesized tripodal thiol derivatives for stable immobilization of oligonucleotide probes on a gold surface. On the basis of the tetrahedral structure of tripod, the tripodal thiol derivatives were bonded upright to the gold substrate, which would control the orientation of oligonucleotide probes. When the gold substrate with oligonucleotide probes tethered using the thiol derivatives was exposed to deionized water at higher temperatures, the tripodal interface molecules were attached to the gold surface more stably than the single contact molecules. The DNA chip platform combined with the functional interface molecule is suitable for a reproducible, inexpensive, and high-throughput detection system for genetic analyses in clinical diagnostics.