An efficient synthesis of a biantennary sialooligosaccharide analog using a 1,6-anhydro-β-lactose derivative as a key synthetic block

An efficient and versatile method for the synthesis of a biantennary octasaccharide derivative was established by combined chemical and enzymatic manipulations of 1,6-anhydro-β-lactose as a key starting material. A key 1,6-anhydro-β-lactose derivative having two unprotected hydroxyl groups at C-3′ and C-6′ positions was prepared and employed for the chemical coupling reaction with a known 3,4,6-tri-O-acetyl-2-deoxy-2-phthalimido-β-d-glucopyranosyl imidate to afford a tetrasaccharide derivative with two GlcNAc branches in 69% yield. Enzymatic galactosylation using UDP-Gal with a bovine milk β1,4-galactosyltransferase and subsequent sialylation with a recombinant α2,3-sialyltransferase in the presence of CMP-Neu5Ac proceeded smoothly and gave a desired model compound, a bivalent sialooctasaccharide (1), in 73% overall yield from the tetrasaccharide intermediate.     

Two‐Photon Absorption Properties of Dehydrobenzo[12]annulenes and Hexakis(phenylethynyl)benzenes: Effect of Edge‐Linkage

Two‐photon absorption (TPA) properties of two trefoil‐shaped compounds with different edge linkages—tris(hexadehydrotribenzo[12]annulene) and tris(tetradehydrotribenzo[12]annulene)—and three asterisk‐shaped compounds having no edge‐linkage—hexakis(phenylethynyl)benzenes—are investigated experimentally by the open‐aperture Z‐scan and TPA‐induced fluorescence methods with wavelength tuneable femtosecond pulses. The compound with ethynylene edge‐linkage exhibits the most intense TPA (the maximal TPA cross section is 1300±170 GM at 572 nm where 1 GM=10^?50 cm⁴ s molecule^?1 photon^?1). The TPA activity of the compounds is primarily explained in terms of the planarity of the molecules in relation with the type of edge‐linkage.     

Surface observation of solvent-impregnated Nafion membrane with atomic force microscopy

Surface morphology modification of the Nafion 117 membrane has been investigated by atomic force microscopy. The effects of water and methanol on the topography and structure of the surface were studied using the contact and tapping atomic force microscopy modes. Nafion topography considerably changes when samples absorb water. However, samples stored in methanol are characterized by flat surfaces. Surface modification was linked to an expansion phenomenon during the swelling of Nafion by solvents. Tapping-mode phase images showed that ionic and cluster domains are distinguishable from the surface of samples impregnated either in water or methanol.     

Determination of cadmium by differentialn pulse anodic-stripping voltammetry after salting-out extraction into acetonitrile

A selective and specific method is presented for anodic-stripping voltammetric determination of cadmium after extraction with 0.1Mtetrabutylammonium iodide solution in acetonitrile from aqueous ammonium sulphate solutions. The detection limit of this method is 0.2 ng ml (in the acetonitrile extract). Interference from matrices or large amounts of elements reduced at more positive potentials can be eliminated by prior extraction. The method has been applied to trace analysis for cadmium in zinc, lead and indium metals, and some inorganic salts.     

HREELS, STM, and STS study of CH(3)-terminated Si(111)-(1x1) surface

An ideally (1x1)-CH(3)(methyl)-terminated Si(111) surface was composed by Grignard reaction of photochlorinated Si(111) and the surface structure was for the first time confirmed by Auger electron spectroscopy, low energy electron diffraction, high-resolution electron energy loss spectroscopy (HREELS), scanning tunneling microscopy (STM), and scanning tunneling spectroscopy (STS). HREELS revealed the vibration modes associated to the CH(3)-group as well as the C-Si bond. STM discerned an adlattice with (1x1) periodicity on Si(111) composed of protrusions with internal features, covering all surface terraces. The surface structure was confirmed to be stable at temperatures below 600 K. STS showed that an occupied-state band exists at gap voltage of -1.57 eV, generated by the surface CH(3) adlattice. This CH(3):Si(111)-(1x1) adlayer with high stability and unique electronic property is prospective for applications such as nanoscale lithography and advanced electrochemistry.     

Reactions of a platinum(III) dimeric complex with alkynes in water: novel approach to alpha-aminoketone, alpha-iminoketone, and alpha,beta-diimine via ketonyl-Pt(III) dinuclear complexes

Reaction of the platinum(III) dimeric complex [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(NO(3))(2)](NO(3))(2) (1), prepared in situ by the oxidation of the platinum blue complex [Pt(4)(NH(3))(8)((CH(3))(3)CCONH)(4)](NO(3))(5) (2) with Na(2)S(2)O(8), with terminal alkynes CH[triple bond]CR (R = (CH(2))(n)CH(3) (n = 2-5), (CH(2))(n)CH(2)OH (n = 0-2), CH(2)OCH(3), and Ph), in water gave a series of ketonyl-Pt(III) dinuclear complexes [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(CH(2)COR)](NO(3))(3) (3, R = (CH(2))(2)CH(3); 4, R = (CH(2))(3)CH(3); 5, R = (CH(2))(4)CH(3); 6, R = (CH(2))(5)CH(3); 7, R = CH(2)OH; 8, R = CH(2)CH(2)OH; 9, R = (CH(2))(2)CH(2)OH; 10, R = CH(2)OCH(3); 11, R = Ph). Internal alkyne 2-butyne reacted with 1 to form the complex [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(CH(CH(3))COCH(3))](NO(3))(3) (12). These reactions show that Pt(III) reacts with alkynes to give various ketonyl complexes. Coordination of the triple bond to the Pt(III) atom at the axial position, followed by nucleophilic attack of water and hydrogen shift from the enol to keto form, would be the mechanism. The structures of complexes 3.H(2)O, 7.0.5C(3)H(4)O, 9, 10, and 12 have been confirmed by X-ray diffraction analysis. A competitive reaction between equimolar 1-pentyne and 1-pentene toward 1 produced complex 3 and [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(CH(2)CH(OH)CH(2)CH(2)CH(3))](NO(3))(3) (14) at a molar ratio of 9:1, suggesting that alkyne is more reactive than alkene. The ketonyl-Pt(III) dinuclear complexes are susceptible to nucleophiles, such as amines, and the reactions with secondary and tertiary amines give the corresponding alpha-amino-substituted ketones and the reduced Pt(II) complex quantitatively. In the reactions with primary amines, the once formed alpha-amino-substituted ketones were further converted to the iminoketones and diimines. The nucleophilic attack at the ketonyl group of the Pt(III) complexes provides a convenient means for the preparation of alpha-aminoketones, alpha-iminoketones, and diimines from the corresponding alkynes and amines.     

Simple analysis of volatile organic compounds (VOCs) in the atmosphere using passive samplers.

A simple analysis of volatile organic compounds (VOCs), such as benzene, toluene, m,p-xylene, and o-xylene, at low levels in the atmosphere was conducted using passive samplers. The methods were applied to analyzing the behavior and origin of VOCs in Kyoto City. The passive samplers were exposed for 7 - 14 days at sampling sites in Kyoto City and for 30 days in the mountains (Mt. Hiei and Mt. Daimonji). Shibata gas-tube samplers packed with activated carbon were used for the determination of VOCs. The absorbed VOCs were extracted into carbon disulfide (CS2) and measured by FID-GC. The determination limits and relative standard deviations for VOCs were 0.3 microg/m3 and 3%, respectively. The samplers were set up at 5 sites in March, 2001 and at 13 stations on Mt. Hiei in November, 2002. The average concentrations of ambient benzene, which were higher than the environmental criterion (3.0 microg/m3), except for those on Mt. Daimonji from March, 2001, to February, 2002, decreased to below 3.0 microg/m3 from March, 2002, to February, 2003. The decrease in ambient benzene may have been due to a decrease in the benzene content in gasoline by the end of 1999, and also by implementation of the Pollutant Release and Transfer Register (PRTR) Act in 2001.     

WAVELENGTH DEPENDENCE (150–290 nm) OF THE FORMATION OF THE CYCLOBUTANE DIMER AND THE (6–4) PHOTOPRODUCT OF THYMINE

The action cross sections for the formation of the cyclobutane dimer and the (6-4) photoproduct of thymine as well as the absorption cross sections of thymine were determined in the wavelength region between 150 and 290 nm. Thymine films sublimed on glass plates were irradiated by monochromatic photons in a vacuum; the induced photoproducts were quantitatively analyzed by high-performance liquid chromatography (HPLC). Under our conditions, two major peaks appeared on the HPLC chromatograms of irradiated samples. The two peaks were identified as being the cis-syn cyclobutane dimer and the (6-4) photoproduct, based on their HPLC retention times, absorption spectra in the effluent, and photochemical reactivity. The fractions of the two photoproducts increased linearly with the fluence at low fluences over the entire wavelength range. Their action cross sections were determined by the slopes of the linear fluence response curve at 10 nm intervals between 150 and 290 nm. The two action spectra showed a similar wavelength dependence and had a maximum at 270 nm as well as two minor peaks at 180 and 220 nm, at which wavelengths the peaks of the absorption spectrum of thymine sublimed on a CaF2 crystal plate appeared. The quantum yields had relatively constant values of around 0.008 for the dimer and 0.013 for the (6-4) photoproduct above 200 nm, decreasing to 0.003 and 0.006, respectively, at 150 nm as the wavelength became shorter.     

(10Z)- and (10E)-19-fluoro-1alpha,25-dihydroxyvitamin D3: an improved synthesis via 19-nor-10-oxo-vitamin D

An efficient synthetic route to (10Z)- and (10E)-19-fluoro-1alpha,25-dihydroxyvitamin D3 was developed. The key feature of this pathway is the introduction of a 19-fluoromethylene group to a (5E)-19-nor-10-oxo-vitamin D derivative. The 10-oxo-compound was obtained via a 1,3-dipolar cycloaddition reaction of (5E)-1alpha,25-dihydroxyvitamin D with in situ generated nitrile oxide followed by ring cleavage of the formed isoxazoline moiety with molybdenum hexacarbonyl. Conversion of the keto group of (5E)-19-nor-10-oxo-vitamin D to the E and Z fluoromethylene group was achieved through a two-step sequence involving a reaction of lithiofluoromethyl phenyl sulfone followed by the reductive desulfonylation of the alpha-fluoro-beta-hydroxy sulfone. The dye-sensitized photoisomerization of the (5E)-19-fluorovitamin D afforded the desired (5Z)-19-fluorovitamin D derivatives, (10Z)- and (10E)-19-fluoro-1alpha,25-dihydroxyvitamin D3.     

Interlayer interaction of two-dimensional layered spin crossover complexes [FeIIH3L(Me)][FeIIL(Me)]X (X-=ClO4-, BF4-, PF6-, AsF6-, and SbF6-; H3L(Me)=tris[2-(((2-methylimidazol-4-yl)methylidene)amino)ethyl]amine)

A series of two-dimensional (2D) spin crossover complexes, [FeIIH3L(Me)][FeIIL(Me)]X (X-=ClO4-, BF4-, PF6-, AsF6-, SbF6-) 1-5, have been synthesized, where H3L(Me) denotes an hexadentate N6 tripodlike ligand containing three imidazole groups, tris[2-(((2-methylimidazol-4-yl)methylidene)amino)ethyl]amine. Compounds 1-5 exhibit a two-step (HS-[FeIIH3L(Me)](2+) + HS-[FeIIL(Me)]-) <--> (HS-[FeIIH3L(Me)](2+) + LS-[FeIIL(Me)]-) <--> (LS-[FeIIH3L(Me)](2+) + LS-[FeIIL(Me)]-) spin-transition. The crystal structure of [FeIIH3L(Me)][FeIIL(Me)]PF6 (3) was determined at 295, 200, and 100 K. The structure consists of homochiral extended 2D puckered sheets, in which the complementary [FeIIH3L(Me)](2+) and [FeIIL(Me)]- capped tripodlike components, linked together by imidazole-imidazolate hydrogen bonds, are alternately arrayed in an up-and-down mode. The Fe-N bond distances and angles revealed that the FeII sites of both constituting units are in the high-spin (HS) state at 295 K; at 200 K, the FeII sites of [FeIIH3L(Me)](2+) and [FeIIL(Me)]- are in the HS and low-spin (LS) states, respectively. The FeII sites of both constituting units are in the LS state at 100 K. The size of the counteranion affects significantly the intra- and interlayer interactions leading to modifications of the spin crossover behavior. The onset of the second spin-transition of the ClO4- (1) and BF4- (2) salts adjoins the first spin-transition, while a mixed (HS-[FeIIH3L(Me)](2+) + LS-[FeIIL(Me)]-) spin-state spans a temperature range as wide as 70 K for salts 3-5 with larger counteranions, PF6-, AsF6-, and SbF6-, respectively. Compounds 1 and 2 showed remarkable LIESST (light induced excited spin state trapping) and reverse-LIESST effects, whereas 3-5 showed no remarkable LIESST effect. The interlayer interaction due to the size of the counteranion is an important factor governing the spin crossover behavior and LIESST effect.