Simultaneous Measurement of Individual ATPase and Mechanical Reactions by a Single Myosin Molecule at Work

Based on techniques for single molecule imaging and nanomanipulation by optical tweezers, we have developed a new technique that allows simultaneous measurement of individual ATPase and mechanical reactions from a single myosin molecule during force generation. We show how the ATPase reaction couples to the mechanical reaction directly at the single molecule level. The results show that the myosin head can produce force even after releasing the bound nucleotide, probably ADP, suggesting that the chemical energy driven by ATP hydrolysis can be hysteretically stored in the myosin molecule. This view does not support a widely accepted hypothesis in which the force generation is tightly coupled to ligand dissociation.This paper was originally presented as an invited paper at the seventh Meeting on Near Field Optics, which was held on July 1, 1998 at Nagoya University, Nagoya, organized by the Research Group on Near Field Optics of the Optical Society of Japan, an affiliate of the Japan Society of Applied Physics.     

Measurement of Cu K-shell and Ag L-shell ionization cross sections by low-energy positron impact

Inner shell ionization cross sections by low-energy positron impact have been measured. Development of an x-ray detector with thin Si(Li) crystals has enabled the first measurements of the absolute cross sections for the positron impacts in the energy range below 30 keV. Threshold behavior of the measured cross sections for the Cu K shell and Ag L shell are compared with the theoretical results of Gryzinski and Kowalski [Phys. Lett. A 183, 196 (1993)]] and Khare and Wadehra [Can. J. Phys. 74, 376 (1996)]]. Good agreement has been found for the Cu K shell, while the experimental values for the Ag L shell were found to be smaller than the corresponding theoretical results.     

Reliability of mean transit time obtained using perfusion-weighted MR imaging; comparison with positron emission tomography

The purpose of this project was to assess the reliability of the cerebral mean transit time (MTT) obtained using perfusion-weighted MR imaging by comparing it with the MTT obtained when performing positron emission tomography (PET). Ten patients with chronic occlusive cerebrovascular disease were investigated. They had either unilateral internal carotid artery occlusion or middle cerebral artery occlusion. The regions-of-interest were placed in non-infarcted areas within the territory of the middle cerebral artery on the affected side. Control regions-of-interest were placed in mirrored regions of the contralateral side. Linear regression analyses were performed using the parameters of the MTT obtained with perfusion-weighted MR imaging and the MTT, cerebral blood flow, vascular reactivity, and oxygen extraction fraction obtained with PET. The respective MTTs of the affected and non-affected sides obtained with perfusion-weighted MR imaging versus those with PET were 7.3 +/- 2.2 s and 6.0 +/- 1.2 s versus 8.2 +/- 3.0 s and 6.4 +/- 1.7 s. The MTT obtained using perfusion-weighted MR imaging and PET demonstrated statistically significant correlation (r = 0.87, p < 0.0001). The MTT obtained with perfusion-weighted MR imaging correlated statistically with cerebral blood flow (r = -0.74, p < 0.001), vascular reactivity (r = -0.73, p < 0.001) and oxygen extraction fraction (r = 0.61, p < 0.01). Similarly, the MTT obtained using PET statistically correlated with cerebral blood flow (r = -0.78, p < 0.0001), vascular reactivity (r = -0.51, p < 0.05) and oxygen extraction fraction (r = 0.68, p < 0.01). The reliability of the MTT obtained using perfusion-weighted MR imaging appears to be approximately equal to that obtained with positron emission tomography.     

Low Power Penalty Operation of a Wide Input Dynamic Range Cross-Phase Modulation Wavelength Converter

We successfully demonstrated low power penalty operation of a cross-phase modulated (XPM) wavelength converter using a semiconductor optical amplifier (SOA) power equalizer. We also clarified the SOA equalizing level for more adaptive wavelength conversion and achieved a power penalty of less than 1 dB over the wide input dynamic range of 15 dB.     

Crystallization behavior and origin of c-axis orientation in sol–gel-derived ZnO:Li thin films on glass substrates

Preferentially, c-axis-oriented lithium-doped zinc oxide (ZnO:Li) thin films were prepared on Pyrex borosilicate glass substrates by a sol–gel method starting from zinc acetate dihydrate, lithium chloride, 2-methoxyethanol and monoethanolamine. Decomposition and crystallization behavior of dip-coated amorphous precursor films during post-annealing treatments were investigated by thermogravimetry–differential thermal analysis (TG–DTA), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), optical transmittance measurements, field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM). It was revealed that the films contained the organic compounds at temperatures up to 300°C, which was the key to the transformation from the amorphous to the crystalline state. Thermodynamical consideration of nucleation and crystal growth was made taking account of surface energies of the film and the glass substrate and an interfacial energy between them. Mechanisms underlying the c-axis orientation were proposed based upon the initial orientation due to nucleation and final growth orientation.     

Applying a Mode Selector to Improve the Pulse-Compression Performance of Asymmetric-Coupled-Waveguide-Based Dispersion Compensators

An InGaAsP slab-type asymmetric-coupled-waveguide-based dispersion compensator with a mode selector has been designed and fabricated. The mode selector is necessary to select either a symmetric [with a positive group-velocity dispersion (GVD)] or antisymmetric (with a negative GVD) supermode. These supermodes exist simultaneously in the dispersion-compensation region of the device. Pulse-compression experiments were used to test the dispersion compensator, evaluating the function of the mode selector. A theoretical study of the experimental results shows that the mode selector obtains a very strong selectivity (nearly 100%) for the antisymmetric supermode.     

In vivo assessment of the permeability of the blood--brain barrier and blood-retinal barrier to fluorescent indoline derivatives in zebrafish

ABSTRACT: BACKGROUND: Successful delivery of compounds to the brain and retina is a challenge in the development of therapeutic drugs and imaging agents. This challenge arises because internalization of compounds into the brain and retina is restricted by the blood--brain barrier (BBB) and blood-retinal barrier (BRB), respectively. Simple and reliable in vivo assays are necessary to identify compounds that can easily cross the BBB and BRB. METHODS: We developed six fluorescent indoline derivatives (IDs) and examined their ability to cross the BBB and BRB in zebrafish by in vivo fluorescence imaging. These fluorescent IDs were administered to live zebrafish by immersing the zebrafish larvae at 7--8 days post fertilization in medium containing the ID, or by intracardiac injection. We also examined the effect of multidrug resistance proteins (MRPs) on the permeability of the BBB and BRB to the ID using MK571, a selective inhibitor of MRPs. RESULTS: The permeability of these barriers to fluorescent IDs administered by simple immersion was comparable to when administered by intracardiac injection. Thus, this finding supports the validity of drug administration by simple immersion for the assessment of BBB and BRB permeability to fluorescent IDs. Using this zebrafish model, we demonstrated that the length of the methylene chain in these fluorescent IDs significantly affected their ability to cross the BBB and BRB via MRPs. CONCLUSIONS: We demonstrated that in vivo assessment of the permeability of the BBB and BRB to fluorescent IDs could be simply and reliably performed using zebrafish. The structure of fluorescent IDs can be flexibly modified and, thus, the permeability of the BBB and BRB to a large number of IDs can be assessed using this zebrafish-based assay. The large amount of data acquired might be useful for in silico analysis to elucidate the precise mechanisms underlying the interactions between chemical structure and the efflux transporters at the BBB and BRB. In turn, understanding these mechanisms may lead to the efficient design of compounds targeting the brain and retina.     

Precise measurement of positronium hyperfine splitting using the Zeeman effect

Positronium is an ideal system for the research of the quantum electrodynamics (QED) in bound state. The hyperfine splitting (HFS) of positronium, Δ_HFS, gives a good test of the bound state calculations and probes new physics beyond the Standard Model. A new method of QED calculations has revealed the discrepancy by 15 ppm (3.9σ) of Δ_HFS between the QED prediction and the experimental average. There would be possibility of new physics or common systematic uncertainties in the previous all experiments. We describe a new experiment to reduce possible systematic uncertainties and will provide an independent check of the discrepancy. We are now taking data and the current result of Δ_HFS?=?203.395 1 ±0.002 4 (stat., 12 ppm) ±0.001 9 (sys., 9.5 ppm) GHz has been obtained so far. A measurement with a precision of O(ppm) is expected within a year.     

Structural phase transitions at clean and metal-covered Si(111) surfaces investigated by RHEED spot analysis

Structural phase transitions between various kinds of superlattice structures formed on a Si(111) surface have been investigated by spot analysis of reflection high-energy electron diffraction (RHEED). Reversible transitions induced by temperature changes and irreversible ones induced by metal depositions were observed. Detailed discussions on the dynamics of the phase transitions are made by quantitative analyses of integrated spot intensity and profile. For a phase transition of 7′7  1′1 structures on a clean Si(111) surface, a hysteresis with temperature difference of 5°C. between in heating and cooling processes was found in the spot intensity change, indicating a first-order transition. Hysteresis was hardly recognized, on the other hand, for transitions of Au-induced superstructures (5×2-Au or ×-Au)  1×1-Au. The spot profiles were found to be broadened during the transition of Si(111)-×-Au  1×1-Au, which was a signature of a continuous transition, while the profiles remained unchanged during the transitions of the 7×7  1×1 and 5×2-Au  1×1-Au phases. Structural conversions induced by In adsorption on the Si(111) surface kept at constant temperatures were also analyzed. The conversions at room temperature were totally dependent on the initial substrate surface structures; the 7×7 surface did not show any structural conversion with In adsorption, while the ×-In surface successively converted to a 2×2 and a × phase with coverage increase. The structural transitions at elevated temperatures were sensitively dependent on the temperatures. Sequences of transitions among the 7×7, 4×1, ×, 1×, and ×4 were quantitatively revealed as changes in RHEED spot intensity.     

Refractive index behavior of SiO2-P2O5 glass in optical fiber application

The refractive index of SiO₂-P₂O₅ glass prepared by a modified chemical vapor deposition method is measured using an interference microscope. It is found that the refractive index in bulk form increases linearly at 9.5×10^-4 (mol.%)^-1 as the P₂O₅ concentration increases. It is also found that quenching at extremely high speed reduces the refractive index over 2 mol.% P₂O₅. The wavelength dispersion of the refractive index dn/dλ is constant up to 5 mol.% P₂O₅ producing a refractive index difference of 5×10^-3 compared with fused silica. Consequently, this glass materials is thought to be suitable for wide band-width optical fiber applications.