Structure and dynamics of polymeric materials in nano-scale

The nano-palpation technique,i.e.,nanometer-scale elastic and viscoelastic measurements based on atomic force microscope,is introduced.It is demonstrated to be very useful in analyzing nanometer-scale materials properties for the surfaces and interfaces of various types of soft materials.It enables us to obtain not only structural information but also mechanical information about a material at the same place and at the same time.     

Synthesis of end‐functionalized poly(phenylacetylene)s with well‐characterized palladium catalysts

End‐functionalized poly(phenylacetylene)s were synthesized by the polymerization of phenylacetylene (PA) using the well‐defined palladium catalysts represented as [(dppf)PdBr(R)] {dppf = 1,1′‐bis(diphenylphosphino)ferrocene}. The Pd catalysts having a series of R groups such as o‐tolyl, mesityl, C(Ph)?CPh₂, C₆H₄‐o‐CH₂OH, C₆H₄‐p‐CN, and C₆H₄‐p‐NO₂ in conjunction with silver triflate polymerized PA to give end‐functionalized poly(PA)s bearing the corresponding R groups in high yields. The results of IR and NMR spectroscopies and MALDI‐TOF mass analyses proved the introduction of these R groups at one end of each polymer chain. The poly(PA) bearing a hydroxy end group was applied as a macroinitiator to the synthesis of a block copolymer composed of poly(PA) and poly(β‐propiolactone) moieties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Prediction of the lifetime of nitrile-butadiene rubber by FT-IR.

A quantitative measurement method with FT-IR was proposed for a thermal degradation analysis of nitrile-butadiene rubber (NBR). An NBR film was prepared as a model sample on a barium fluoride (BaF2) crystal plate, which was subjected to a heat treatment. The absorbances of various functional groups were measured directly by FT-IR after thermal degradation at high temperatures. By measuring the absorbances, it was possible to readily determine quantitatively each of the functional groups after the degradation of NBR. By assuming that the NBR lifetime was the point at which the absorbance of a carbon-carbon double bond reaches 45% of that prior to thermal treatment, a method for predicting the lifetime of NBR heated below 150 degrees C was proposed, by using an Arrhenius plot of the heating time versus heating temperature.     

Biologically-inspired stochastic vector matching for noise-robust information processing

“End of Moore’s Law” has recently become a topic. Keeping the signal-to-noise ratio (SNR) at the same level in the future will surely increase the energy density of smaller-sized transistors. Lowering the operating voltage will prevent this, but the SNR would inevitably degrade. Meanwhile, biological systems such as cells and brains possess robustness against noise in their information processing in spite of the strong influence of stochastic thermal noise. Inspired by the information processing of organisms, we propose a stochastic computing model to acquire information from noisy signals. Our model is based on vector matching, in which the similarities between the input vector carrying external noisy signals and the reference vectors prepared in advance as memorized templates are evaluated in a stochastic manner. This model exhibited robustness against the noise strength and its performance was improved by addition of noise with an appropriate strength, which is similar to a phenomenon observed in stochastic resonance. Because the stochastic vector matching we propose here has robustness against noise, it is a candidate for noisy information processing that is driven by stochastically-operating devices with low energy consumption in future. Moreover, the stochastic vector matching may be applied to memory-based information processing like that of the brain.     

Synthesis and properties of carbamate‐ and amine‐containing poly(phenylacetylenes)

The 3‐ and 4‐aminophenylacetylenes protected by t‐butoxycarbonyl (t‐Boc) and 9‐fluorenylmethoxycarbonyl (Fmoc) groups ( 3a – 6a ) were synthesized and polymerized using [(nbd)RhCl]₂ ( 1 ) and [(nbd)Rh⁺‐η⁶‐PhB^?Ph₃] ( 2 ) catalysts. The t‐Boc‐containing polymers [poly( 3a ) and poly( 4a )] were obtained in high yield (82–91%). Among the Fmoc‐protected monomers, the para‐derivative polymerized well [poly( 6a ); yield = 85–94%], whereas its meta‐substituted analogue did not afford high molecular weight polymer in good yield [poly( 5a ); yield = 10–15%]. The use of KN(SiMe₃)₂ as a cocatalyst in conjunction with 1 led to a dramatic increase in the molecular weight of the polymers. The acid‐ and base‐catalyzed removal of the t‐Boc and the Fmoc groups, respectively, generated primary amine‐containing polymers [poly( 3b )–poly( 6b )] which cannot be obtained directly by the polymerization of the corresponding monomers. The solubility characteristics of the polymers bearing protected amino groups were quite different from those of the unprotected ones, the former being soluble in polar solvents, whereas the latter displayed poor solubility even in polar protic or highly polar aprotic solvents. The attempts to accomplish the free‐standing membrane fabrication by solution casting were successful only for poly( 3a ), and an augmentation in the gas permeability and CO₂/N₂ permselectivity was discerned in comparison with the unsubstituted poly(phenylacetylene) and poly(m‐t‐butyldimethylsiloxyphenylacetylene). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1853–1863, 2009     

High‐resolution solid‐state NMR study of the domain structure and molecular motion in drawn films of a vinylidene fluoride and trifluoroethylene copolymer with 73 mol % vinylidene fluoride

The heterogeneous higher order structure and molecular motion in a single crystalline film of a vinylidene fluoride (VDF) and trifluoroethylene (TrFE) copolymer with 73 mol % VDF was investigated with the ¹H–¹³C cross‐polarization/magic‐angle spinning NMR technique. A transient oscillation was observed in plots of the ¹³C peak intensity versus the contact time for the CH₂, CHF, and CF₂ groups. On the basis of the extended cross‐relaxation theory of spin diffusion, we determined that the oscillation behavior was caused by the TrFE‐rich segments in the chain and that the crystal consisted of VDF‐rich and TrFE‐rich domains. The former had TrFE‐rich segments in VDF and TrFE fractions of 0.24 and 0.27, respectively, and the latter had VDF‐rich segments in a VDF fraction of 0.49. The spin–lattice relaxation time T_1ρH in the rotating frame for each group was minimal in the three temperature regions of β, α_b, and α_c (↑) on heating and in the two temperature regions of α_1D and α_c (↓) on cooling. The α_c (↑) and α_c (↓) processes depended on the first‐order ferroelectric phase‐transition regions on heating and cooling, respectively. The motional modes for the other processes were confirmed by the T_1ρH minimum behavior of the VDF and TrFE groups in the TrFE‐rich domain and the VDF‐rich segments in the VDF‐rich domain. The β and α_b processes were attributed to the flip–flop motion of the TrFE‐rich segments and the competitive motion of the TrFE‐ and VDF‐rich segments in the ferroelectric phase, respectively. The α_1D process was due to the one‐dimensional diffusion motion of the conformational defects along the chain in the paraelectric phase, accompanied by the trans and gauche transformation of the VDF conformers of ttg⁺tg^? and g⁺tg^?tt. The effect of the competitive motion of the TrFE‐rich segment on the thermal stability of the VDF‐rich segment in the chain near the Curie temperature was examined. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1026–1037, 2002     

Low Power Penalty Operation of a Wide Input Dynamic Range Cross-Phase Modulation Wavelength Converter

We successfully demonstrated low power penalty operation of a cross-phase modulated (XPM) wavelength converter using a semiconductor optical amplifier (SOA) power equalizer. We also clarified the SOA equalizing level for more adaptive wavelength conversion and achieved a power penalty of less than 1 dB over the wide input dynamic range of 15 dB.     

A distortion compensation method for a conical holographic stereogram

An image processing technique to display a distortion-free reconstructed image from a rainbow type conical holographic stereogram is proposed. The method consists of forming a new set of 2D images from the original set by applying an image process. The image processing method is made through ray tracing equations. The results show that the performance of the proposed method is good as it removes distortion of the image.     

Synthesis of poly(ester amide)s by the melt polycondensation of semiaromatic polyesters with ethanolamine and their characterization

Semiaromatic poly(ester amide)s (PEAs) were synthesized by the melt polycondensation of ethanolamine (EA) derivatives with dimethyl terephthalate and ethylene glycol in the presence of tetrabutyl titanate as a catalyst, and their crystallization and thermal properties were investigated. The introduction of an amide group into a semiaromatic polyester such as poly(ethylene terephthalate) (PET) produced PEAs (EA-modified PET polymers) with an increase in the melting point. However, these PEAs were found to decompose at a lower temperature than PET on the basis of TGA. Moreover, direct pyrolysis/mass spectrometry measurements suggested that an initial step of the thermal decomposition was a β-CH hydrogen-transfer reaction via asix-member ring transition state at the ester–ethylene–amide unit, at which carbon–oxygen bond scission took place to yield carboxyl and N-vinylamide end groups. Furthermore, molecular orbital calculations using trimer models bis[2-[[4-(methoxycarbonyl)benzoyl]oxy]ethyl]terephthalate, N-[2-[[4-(methoxycarbonyl)benzoyl]oxy]ethyl]-4-[2-[[4-(methoxycarbonyl)benzoyl]oxy]ethyloxycarbonyl]benzamide, and N,N′-bis[2-[[4-(methoxycarbonyl)benzoyl]oxy]ethyl]terephthalamide strongly supported the idea that the β-CH hydrogen-transfer reaction in the thermal decomposition of PEAs might occur more easily at the methylene group next to the amide group in an ester–ethylene–amide unit rather than at the methylene group next to the ester group in an ester–ethylene–ester unit. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2184–2193, 2007