Cubic phase prepared in an anionic/amphoteric surfactant/oleic acid/decane/water system and the relationship with the neighboring phase

The formation, properties, and structure of discontinuous cubic phase in the pseudo-ternary system consisting of N'-carboxyethyl N'-hydroxyethyl N-aminoethyl dodecylamide (imidazoriniumbetain), sodium and triethanol amine salt of polyoxyethylene (1.5 mol) myristyl ether sulfate, oleic acid, decane, and water at a constant surfactant/water ratio of 4/6 were studied by means of small-angle X-ray scattering, freeze-fracture transmission electron microscopy, static light scattering, and dynamic rheology to gain an insight in its origin and interrelation with neighboring phases. It was found that the cubic phase occupied a rather wide region in a constructed ternary phase diagram, including from 25 to 45% of decane. Its properties and structural parameters varied with changing the oil content. The decane addition caused the swelling of spherical micellar aggregates. This resulted in an increase of their diameter up to 35 nm, which was ca. nine times larger than that of the initial micelles, and micellar volume fraction (packing fraction) up to 72 vol. %, which was close to the theoretically possible value of 74 vol. % for the close-packed spherical particles. The cubic phase was surrounded by a micellar L1 phase from the water-rich side (separated by a short two-phase region), two-phase region (cubic + oil) from the oil-rich side, and a lamellar phase from the surfactant-rich side. A transition from the L1 phase to the cubic state at the packing fraction of 60 vol. % was caused by an increase in the packing density of micellar aggregates, occurring with the decane addition. When it reached 72 vol. %, the oil started forming a separated phase owing to the inability of micelles to dissolve it. The important observation is that the adjacent phase from the surfactant-rich side was a lamellar one made up of flat bilayers. The preliminary data showed that the lamellar phase coexisted with cylindrical micelles in the intermediate two-phase region separating the cubic and lamellar phases.     

Correlation analysis of substituent effects on the acidity of benzoic acids by the AM1 method

Theoretical analysis of the electronic effect of aromatic substituents was done with the use of the AM1 computational procedure. The gas-phase acidity of substituted benzoic acids was linear with the difference in the heat of formation between corresponding benzoic acids and benzoate anions, the energy of the highest occupied molecular orbital, and the net charge on the acidic oxygen atoms of the corresponding benzoate anions. The Hammett σ constant was linearly correlated with the net charge on the atoms of the acid moiety of substituted benzoic acids. The AM1 computational procedure satisfactorily reproduced the electronic properties of a wide variety of substituents.     

Luminescence ranging from red to blue: a series of copper(I)-halide complexes having rhombic {Cu2(mu-X)2} (X = Br and I) units with N-heteroaromatic ligands

A series of Cu(I) complexes formulated as [Cu(2)(mu-X)(2)(PPh(3))(L)(n)] were prepared with various mono- and bidentate N-heteroaromatic ligands (X = Br, I; L = 4,4'-bipyridine, pyrazine, pyrimidine, 1,5-naphthyridine, 1,6-naphthyridine, quinazoline, N,N-dimethyl-4-aminopyridine, 3-benzoylpyridine, 4-benzoylpyridine; n = 1, 2). Single-crystal structure analyses revealed that all the complexes have planar {Cu(2)X(2)} units. Whereas those with monodentate N-heteroaromatic ligands afforded discrete dinuclear complexes, bidentate ligands formed infinite chain complexes with the ligands bridging the dimeric units. The long Cu...Cu distances (2.872-3.303 A) observed in these complexes indicated no substantial interaction between the two Cu(I) ions. The complexes showed strong emission at room temperature as well as at 80 K in the solid state. The emission spectra and lifetimes in the microsecond range were measured at room temperature and at 80 K. The emissions of the complexes varied from red to blue by the systematic selection of the N-heteroaromatic ligands (lambda(em)(max): 450 nm (L = N,N-dimethyl-4-aminopyridine) to 707 nm (L = pyrazine)), and were assigned to metal-to-ligand charge-transfer (MLCT) excited states with some mixing of the halide-to-ligand (XL) CT characters. The emission energies were successfully correlated with the reduction potentials of the coordinated N-heteroaromatic ligands, which were estimated by applying a simple modification based on the calculated stabilization energies of the ligands by protonation.     

Synthesis of bridgeheaded nitrogen systems. s-triazolo[4,3-b]-as-triazine,s-triazolo[4,3-d]-as-triazine and s-triazolo[3,4-b]-1,3,4-Thiadiazole ring systems

By the reactions of hydrazino-as-triazines ( 1a-d and 5 ) with cyanogen bromide were synthesized s-triazolo-as-triazines ( 2a-d ) and ( 6 ). Likewise, similar reactions of amino-s-triazolethiols ( 7a-e ) gave s-triazolo-1,3,4-thiadiazoles ( 8a-e ). Compound 2a was brominated to 2g.     

New base pairing motifs. The synthesis and thermal stability of oligodeoxynucleotides containing imidazopyridopyrimidine nucleosides with the ability to form four hydrogen bonds

The synthesis and thermal stability of oligodeoxynucleotides (ODNs) containing imidazo[5',4':4,5]pyrido[2,3-d]pyrimidine nucleosides 1-4 (N(N), O(O), N(O), and O(N), respectively) with the aim of developing two sets of new base pairing motifs consisting of four hydrogen bonds (H-bonds) is described. The proposed four tricyclic nucleosides 1-4 were synthesized through the Stille coupling reaction of a 5-iodoimidazole nucleoside with an appropriate 5-stannylpyrimidine derivative, followed by an intramolecular cyclization. These nucleosides were incorporated into ODNs to investigate the H-bonding ability. When one molecule of the tricyclic nucleosides was incorporated into the center of each ODN (ODN I and II, each 17mer), no apparent specificity of base pairing was observed, and all duplexes were less stable than the duplexes containing natural G:C and A:T pairs. On the other hand, when three molecules of the tricyclic nucleosides were consecutively incorporated into the center of each ODN (ODN III and IV, each 17mer), thermal and thermodynamic stabilization of the duplexes due to the specific base pairings was observed. The melting temperature (T(m)) of the duplex containing the N(O):O(N) pairs showed the highest T(m) of 84.0 degrees C, which was 18.2 and 23.5 degrees C higher than that of the duplexes containing G:C and A:T pairs, respectively. This result implies that N(O)and O(N) form base pairs with four H-bonds when they are incorporated into ODNs. The duplex containing N(O):O(N) pairs was markedly stabilized by the assistance of the stacking ability of the imidazopyridopyrimidine bases. Thus, we developed a thermally stable new base pairing motif, which should be useful for the stabilization and regulation of a variety of DNA structures.     

New synthesis of secondary carboxamide by using 2-methyl-2-oxazoline as a building block

New method for the synthesis of secondary carboxamides of type, R²NHCOR¹, which utilizes 2-methyl-2-oxazoline as a carboxamide building block and various halides, R²X, has been developed.     

Optically active seleninate esters: isolation, absolute configuration, racemization mechanism, and transformation into chiral selenoxide

Optically active seleninate esters were obtained for the first time by chromatographic resolution on an optically active column. The absolute configurations of the optically active seleninate esters were determined by comparing their chiroptical properties with those of two analogous sulfinate esters, the absolute configuration of one of which is known and that of the other was determined by X-ray crystallographic analysis. The optically active seleninate esters were found to racemize in solution. Kinetic studies of the racemization, the oxygen exchange reaction with H(2)(18)O, and theoretical studies clarified that the racemization of the optically active seleninate esters in solution proceeded via an achiral hypervalent selenurane intermediate that was formed by the reaction with water. The reaction of the optically active seleninate ester and the sulfinate ester having bulky substituents with Grignard reagents was found to proceed with the retention of stereochemistry to give an optically active selenoxide and sulfoxides, respectively.     

Simultaneous detection of monohydroxybenzo[a]pyrene positional isomers by reversed-phase liquid chromatography coupled to electrospray ionization mass spectrometry

A liquid chromatographic (LC) method has been developed for the separation of 11 monohydroxybenzo[a]pyrenes (OH BaPs) positional isomers, and for their detection using electrospray ionization mass spectrometry (ESI-MS). All OH BaPs isomers were separated on an octadecylsilyl (C(18))-bonded amorphous organosilica column utilizing gradient elution with acetonitrile-water and triethylamine (TEA) at pH 11.0 and determined by MS, except 2- and 8-OH BaPs which were coeluted. The lower detection limits were in the range from 1.6 micro g/L for 12-OH BaP to 12 micro g/L for 5-OH BaP without any sample enrichment. The relative standard deviations of area response were in the range from 1.8% (9-OH BaP) to 4.9% (12-OH BaP) except for 9.4% (7-OH BaP). The developed method was successfully applied to incubation mixtures of BaP and CYP1A1/epoxide hydrolase. This method identified 1-, 3- and 9-OH BaPs as the major metabolites, and 2- (and/or 8-) and 12-OH BaPs as the minor metabolites in the incubation mixture.     

Analysis of myoglobin adsorption to Cu(II)-IDA and Ni(II)-IDA functionalized Langmuir monolayers by grazing incidence neutron and X-ray techniques

The adsorption of myoglobin to Langmuir monolayers of a metal-chelating lipid in crystalline phase was studied using neutron and X-ray reflectivity (NR and XR) and grazing incidence X-ray diffraction (GIXD). In this system, adsorption is due to the interaction between chelated divalent copper or nickel ions and the histidine moieties at the outer surface of the protein. The binding interaction of histidine with the Ni-IDA complex is known to be much weaker than that with Cu-IDA. Adsorption was examined under conditions of constant surface area with an initial pressure of 40 mN/m. After approximately 12 h little further change in reflectivity was detected, although the surface pressure continued to slowly increase. For chelated Cu2+ ions, the adsorbed layer structure in the final state was examined for bulk myoglobin concentrations of 0.10 and 10 microM. For the case of 10 microM, the final layer thickness was approximately 43 A. This corresponds well to the two thicker dimensions of myoglobin in the native state (44 A x 44 A x 25 A) and so is consistent with an end-on orientation for this disk-shaped protein at high packing density. However, the final average volume fraction of amino acid segments in the layer was 0.55, which is substantially greater than the value of 0.44 calculated for a completed monolayer from the crystal structure. This suggests an alternative interpretation based on denaturation. GIXD was used to follow the effect of protein binding on the crystalline packing of the lipids and to check for crystallinity within the layer of adsorbed myoglobin. Despite the strong adsorption of myoglobin, very little change was observed in the structure of the DSIDA film. There was no direct evidence in the XR or GIXD for peptide insertion into the lipid tail region. Also, no evidence for in-plane crystallinity within the adsorbed layer of myoglobin was observed. For 0.1 microM bulk myoglobin concentration, the average segment volume fraction was only 0.13 and the layer thickness was < or = 25 A. Adsorption of myoglobin to DSIDA-loaded with Ni2+ was examined at bulk concentrations of 10 and 50 microM. At 10 microM myoglobin, the adsorbed amount was comparable to that obtained for adsorption to Cu2+-loaded DSIDA monolayers at 0.1 M. But interestingly, the adsorbed layer thickness was 38 A, substantially greater than that obtained at low coverage with Cu-IDA. This indicates that either there are different preferred orientations for isolated myoglobin molecules adsorbed to Cu-IDA and Ni-IDA monolayer films or else myoglobin denatures to a different extent in the two cases. Either interpretation can be explained by the very different binding energies for individual interactions in the two cases. At 50 microM myoglobin, the thickness and segement volume fraction in the adsorbed layer for Ni-IDA were comparable to the values obtained with Cu-IDA at 10 microM myoglobin.     

Intramolecular radical cyclization-ring-closing metathesis approach to fused polycyclic ethers. Convergent synthesis and conformational analysis of the (E)FGH ring system of ciguatoxin

A convergent synthetic route to the (E)FGH ring system 4 of ciguatoxins, the causative toxins for ciguatera fish poisoning, has been developed. The synthesis features convergent coupling to form dioxane acetal, regioselective acetal cleavage by diethylaluminum phenylthiolate or diisobutylaluminum phenylselenolate followed by intramolecular radical cyclization to construct the oxepane ring G, and a ring-closing metathesis reaction to form the hexahydrooxonine ring F. The hexahydrooxonine ring F of tetracyclic model system 4 existed as a 5:1 equilibrium mixture of two conformers (UP and DOWN conformers), with the UP one predominating. This is the first illustration that reproduces the preference for the UP conformer over the DOWN one, which preference was observed for natural ciguatoxins.