High-resolution GaP Terahertz Spectrometer and Its Application to Detect Defects in Gamma-irradiated Glucose Crystal

We developed high-resolution GaP THz signal generator using Cr:Forsterite lasers with gratings as both a pump and a signal beam for difference-frequency generation. A line width of less than 500 MHz and a wide tunable frequency range (0.6–6.2 THz) provide sufficient resolution for measuring materials with sharp absorption bands using the generator as the light source for a THz spectrometer. This is suitable for materials such as gases or solid samples at low temperatures. We demonstrated the detection of defects in organic materials, as they appear as slight deviations in the absorption frequency in the THz region.     

Surface treatment of CaCO3 with a mixture of amino- and mercapto-functional silane coupling agents and tensile properties of the rubber composites

In order to reinforce the composite consisting of isoprene rubber (IR) and calcium carbonate (CaCO₃) particles, the surface treatment of CaCO₃ particles with a mixture of amino- and mercapto-functional silane coupling agents was investigated. The quantity of chemisorbed silanes in treated CaCO₃ measured using thermogravimetry was greater for amino- than for mercapto-silane and for the tri- than for the dialkoxy structure. Second, the molecular mobility of polycondensate of the mixtures with the trialkoxy structure measured using ¹H pulse nuclear magnetic resonance had the least molecular mobility, i.e., formed the highest density network. The greater values of stress at 500% strain, fracture stress, and elongation at break were determined for the treatment with amino- and mercapto-functional silanes having a trialkoxy structure from the stress-strain curves of composite. The mixture treatment with dialkoxy structure and with amino- or mercapto-functional silane only did not improve the mechanical properties sufficiently. Interactions between the amino group and the CaCO₃ surface, covalent bonding between the mercapto group and the IR, and high density network formation of trialkoxy silane were important for improving the mechanical properties of the composite.     

Crystallization behavior and origin of c-axis orientation in sol–gel-derived ZnO:Li thin films on glass substrates

Preferentially, c-axis-oriented lithium-doped zinc oxide (ZnO:Li) thin films were prepared on Pyrex borosilicate glass substrates by a sol–gel method starting from zinc acetate dihydrate, lithium chloride, 2-methoxyethanol and monoethanolamine. Decomposition and crystallization behavior of dip-coated amorphous precursor films during post-annealing treatments were investigated by thermogravimetry–differential thermal analysis (TG–DTA), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), optical transmittance measurements, field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM). It was revealed that the films contained the organic compounds at temperatures up to 300°C, which was the key to the transformation from the amorphous to the crystalline state. Thermodynamical consideration of nucleation and crystal growth was made taking account of surface energies of the film and the glass substrate and an interfacial energy between them. Mechanisms underlying the c-axis orientation were proposed based upon the initial orientation due to nucleation and final growth orientation.     

Applying a Mode Selector to Improve the Pulse-Compression Performance of Asymmetric-Coupled-Waveguide-Based Dispersion Compensators

An InGaAsP slab-type asymmetric-coupled-waveguide-based dispersion compensator with a mode selector has been designed and fabricated. The mode selector is necessary to select either a symmetric [with a positive group-velocity dispersion (GVD)] or antisymmetric (with a negative GVD) supermode. These supermodes exist simultaneously in the dispersion-compensation region of the device. Pulse-compression experiments were used to test the dispersion compensator, evaluating the function of the mode selector. A theoretical study of the experimental results shows that the mode selector obtains a very strong selectivity (nearly 100%) for the antisymmetric supermode.     

Vertical and direct integration of heterojunction phototransistors and laser diodes

An optoelectronic integrated device based on the concept of vertical and direct integration is described. Four types of integrated devices composed of multiple heterojunction phototransistors and laser diodes are developed and the devices successfully achieve thirteen functions: optical switching, amplification, thresholding, bistability, light-controlled optical bistability, light-controlled optical thresholding, tristability, set and reset functions in tristable states, set and reset functions in tetrastable states, and bistable and tristable flip-flop functions.     

Topological Superconductivity in Cu(x)Bi(2)Se(3)

A topological superconductor (TSC) is characterized by the topologically protected gapless surface state that is essentially an Andreev bound state consisting of Majorana fermions. While a TSC has not yet been discovered, the doped topological insulator Cu(x)Bi(2)Se(3), which superconducts below ～3 K, has been predicted to possess a topological superconducting state. We report that the point-contact spectra on the cleaved surface of superconducting Cu(x)Bi(2)Se(3) present a zero-bias conductance peak (ZBCP) which signifies unconventional superconductivity. Theoretical considerations of all possible superconducting states help us conclude that this ZBCP is due to Majorana fermions and gives evidence for a topological superconductivity in Cu(x)Bi(2)Se(3). In addition, we found an unusual pseudogap that develops below ～20 K and coexists with the topological superconducting state.     

Electron Temperatures and Electron Densities in Microwave Helium Discharges with Pressures Higher than 0.1 MPa

We adopted laser Thomson scattering for measuring the electron density and the electron temperature of microwave plasmas produced in helium at the pressures higher than the atmospheric pressure. The electron density decreased while we observed the increase in the electron temperature with the pressure. These are reasonable results by considering the decrease in the reduced electric field, the dominant loss of electrons via three‐body recombination with helium as the third body, and the production of electrons with medium energy via heavy particle collisions at the high gas pressure. The temporal variation of the electron temperature had the rise and the fall time constants of approximately 10 ns. The rapid heating and cooling of the electron temperature are due to the fast energy transfer from electrons to helium because of the high collision frequency in the high‐pressure discharge. (© 2015 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Three-dimensional vector holograms in photoreactive polymer dissolved liquid crystal composite

A detailed analysis of three-dimensional vector holograms is presented which were recorded in a photoreactive polymer dissolved liquid crystal. The diffraction properties of resultant periodic anisotropic structures were investigated. Experimental observations confirmed that the diffraction efficiencies of the structures varied with slight changes of the grating pitch, and also that they strongly depended on the incident angle of the probe beam. These diffraction properties were explained by the finite-difference time-domain optical simulations.     

Fraunhofer Diffraction Pattern by a Slit Aperture between a Knife Edge and a Metal Cylinder

The Fraunhofer diffraction pattern of an aperture formed between a knife edge and a smooth surface of a turned metal cylinder or half cylinder is different from the diffraction pattern of an ideal slit aperture. The diffraction pattern is simulated by adding the light reflected by the cylinder surface to the pattern formed by a slit, and is measured using a cylinder that has been partly cut away so that it can represent either a full or half cylinder. The theoretical and measured patterns agree well with each other.