A multi-mode-driven molecular shuttle: photochemically and thermally reactive azobenzene rotaxanes

The shuttling process of alpha-CyD in three rotaxanes (1-3) containing alpha-cyclodextrin (alpha-CyD) as a ring, azobenzene as a photoactive group, viologen as an energy barrier for slipping of the ring, and 2,4-dinitrobenzene as a stopper was investigated. The trans-cis photoisomerization of 1 by UV light irradiation occurred in both DMSO and water due to the movement of alpha-CyD toward the ethylene group, while the photoisomerization of 2 occurred in DMSO, but not in water. No photoisomerization was observed for 3 in both water and DMSO. The activation parameters of 1 and 1-ref in DMSO are subject to a compensation relation between deltaS(double dagger) and deltaH(double dagger); however, in water, the deltaS(double dagger) terms are not compensated by the deltaH(double dagger) terms. Alternating irradiation of the UV and visible lights resulted in a reversible change in the induced circular dichroism (ICD) bands of trans-1 and cis-1. In contrast, after the UV light irradiation, the ICD band of trans-2 decreased without the appearance of any bands of cis-2. The NMR spectra of 2 in DMSO showed coalescence of the split signals for the methylene and for the viologen protons due to the shuttling of alpha-CyD. Both the NOE differential spectra for cis-1 in water after UV light irradiation and 2 in DMSO after heating to 120 degrees C showed the negative NOE peaks assigned to interior protons of alpha-CyD, suggesting that alpha-CyD in cis-1 exists at the one ethylene moiety, and alpha-CyDs in cis-2 and 2 heated in DMSO exist at the propylene moieties.     

Plasma polymerization of tetrafluoroethylene. III. Reproducibility and effects of substrate and reactor materials

Plasma polylmerization occurs in plasmas surrounded by surfaces and polymer formation is one of the complicated interactions that take place between active species and molecules which constitute surfaces and gas phases. Effects of reactor wall, substrate materials, flow rate, and discharge power on polymer formation, and properties of polymer deposits were investigated by ESCA, IR (infrared) spectroscopy, and the measurement of system pressure. The effect of surface is important at the initial stage of plasma polymerization which can be easily detected by the system pressure change; however, integrated properties such as IR spectroscopy and the deposition rate show the effect in a less pronounced manner. ESCA, which reflects the properties of surface (approximately 20 A? in depth), showed the effect of surface in an even less sensitive manner. The amount and properties (including the effects of surfaces) are dependent on plasma polymerization parameter W/FM(W, wattage; F, volume flow rate; and M, molecualar weight of monomer) and the location of deposition within a reactor. IR and ESCA data clearly showed the dependence of polymer properties on W/FM; i.e., increase of W and decrease of M to be equivalent. When all these factors were kept under control, the reproducibility of plasma polymerization was found to be excellent.     

Novel synthesis of heterocyclic spirans by tandem cycloaddition to sulfur-containing heterocumulenes

Novel Ni(C0)₄-promoted tandem cycloadditions of diphenylcyclo- propenone to isothiocyanates and to CS₂ were found to provide new heterocyclic spirans, pyrroline-2-one-5-spiro-5′-thiolene-4′-ones and a thiolene-2-one-5-spiro-5′-thiolene-4′-one, respectively, in moderate yields.     

Synthesis and antifungal activities of a series of (1,2-disubstituted vinyl)imidazoles.

A series of vinylimidazoles containing a hetero atom such as sulfur or oxygen at a beta-position of the vinyl group was prepared and the antifungal activities were tested. It was found that sulfur-substituted derivatives such as (E)-1-[2-(methylthio)-1-[2-(pentyloxy)phenyl]ethenyl]-1H-imidazole (5a-5) and (E)-1-[1-[2-(hexyloxy)phenyl]-2-(methylthio)ethenyl]-1H-imidazole (5a-6) showed excellent antifungal activities against dermatophytes and yeast cells. The stereochemistry of the hydrochloride salt of 5a-5 was determined by X-ray crystallography. The structure-activity relationships were discussed.     

First asymmetric total synthesis of tetrodotoxin

Tetrodotoxin, a toxic principle of puffer fish poisoning, is one of the most famous marine natural products because of the complex structure having many functional groups and its potent biological activity leading to death. Since the structure elucidation in 1964, this toxin has been recognized as a formidable target molecule for total synthesis. We have recently achieved the first asymmetric total synthesis from 2-acetoxy-tri-O-acetyl-d-glucal as a chiral starting material. The highly hydroxylated cyclohexane ring was constructed by Claisen rearrangement and regioselective hydroxylations of an acetone moiety and an intramolecular directed aldol condensation of the precursor having methyl ketone with dihydroxyacetone, which was synthesized through Sonogashira coupling. Installation of nitrogen functionality was unsuccessful through an attempted Overman rearrangement. We, therefore, employed a new intramolecular conjugate addition strategy between the carbamate and unsaturated ester groups. The alpha-hydroxyl lactone moiety was synthesized through an intramolecular epoxide opening by the Z-enolate of aldehyde, which was followed by oxidation-reduction of the resulting cyclic vinyl ether. The lactone was then converted to a protected ortho ester, and then gunanidinylation was followed by cleavage of the 1,2-glycol to give the fully protected tetrodotoxin. Selection of the protective groups has finally led us to accomplish the total synthesis of tetrodotoxin in an enantiomerically pure form. All the stereogenic centers were controlled with high selectivity, and the hydroxyl groups were differently protected to discriminate for the future analogue synthesis of a bioorganic program. The synthetic tetrodotoxin was purified by ion exchange chromatography and characterized to be identical with the natural compound.     

Elucidation of solid-state complexation in ground mixtures of cholic acid and guest compounds

The solid-state complexation between cholic acid (CA) and either methyl p-hydroxybenzoate (MPB) or ibuprofen (IBP) was investigated. Powder X-ray diffractometry, IR spectroscopy and thermal analysis suggested the complex formation between CA and MPB as well as between CA and IBP by co-grinding method. The stoichiometry of CA-MPB was 1 : 1 while that of CA-IBP was 2 : 1, reflecting the effect of guest size on complex formation. The guest compounds were assumed to be included in the channel of complexes formed by hydrogen bonds among CA molecules.     

Synthesis and properties of a poly(diphenylacetylene) containing carbazolyl groups

1-(p-N-Carbazolylphenyl)-2-phenylacetylene (p-CzDPA) was polymerized by TaCl₅–co-catalyst systems (cocatalysts: n-Bu₁Sn, Et₃SiH, and 9BBN) to produce acetone-insoluble polymers in about 60-70% yields. Poly(p-CzDPA) was a yellowish-orange solid, most part of which was soluble in toluene, chloroform, etc., and its weight-average molecular weights were around 4×10⁵. This polymer formed a tough film by solution casting, and was thermally very stable (the onset temperature of weight loss in TGA in air 470°C). The oxygen per-meability coefficient of the polymer at 25°C was lower than two barrers. The present polymer showed photoconductivity and redox activity. © 1995 John Wiley & Sons, Inc.     

Pyrolytic synthesis and Eu→Eu reduction process of blue-emitting perovskite-type BaLiF3:Eu thin films

Perovskite-type barium lithium fluoride (BaLiF₃) was synthesized by pyrolysis of metal trifluoroacetates. The reaction temperature necessary for producing a single-phase material was found to be 600°C, which was lower than that for a conventional solid-state reaction or a melting method. Eu-doped BaLiF₃ was also prepared and characterized to examine the suitability of trifluoroacetates for precursors in synthesizing homogeneous complex metal fluoride materials. It was demonstrated that trivalent Eu³⁺, which was used as acetate for a starting material, was reduced to divalent Eu²⁺ in the pyrolysis process of BaLiF₃, as indicated by a broad blue emission due to an allowed 4f⁶5d→4f⁷ transition at 408 nm with a ultraviolet excitation at 254 nm. The concentration quenching of the blue emission occurred at 5 at% of Eu in BaLiF₃, indicating that Eu was homogeneously dispersed in the BaLiF₃ host lattice. Mechanisms of the formation and reduction process of BaLiF₃ were discussed based on pertinent chemical reactions.     

Structure of Aqueous Gallium(III) Bromide Solutions Over a Temperature Range 80–333 K by Raman Spectroscopy, X-ray Absorption Fine Structure, and X-ray Diffraction

The structure and complex formation of concentrated aqueous gallium(III) bromide (GaBr₃) solutions have been investigated over a temperature range 80–333 K by Raman spectroscopy, X-ray absorption fine structure (XAFS), and X-ray diffraction. The Raman spectra obtained at various [Br^?]/[Ga³⁺] molar ratios and temperatures have shown that complex formation between Ga³⁺ and Br^? occurs as a predominant species, with [GaBr₄]^? at [Ga³⁺] as high as 1～2 M (M = mol?dm ^?3) and [Br^?]/[Ga³⁺] ratios > ～2, and that cooling of the solutions favors the formation of the aqua Ga³⁺. The intermediate species were not seen in the Raman spectra. The XAFS data have revealed that the aqua complex has a sixfold coordination as [Ga(H₂O)₆]³⁺ with a Ga³⁺–H₂O distance of (1.96 ± 0.02) Å, whereas the [GaBr₄]^? complex has a Ga³⁺–Br^? distance of (2.33± 0.02) Å, and that vitrification of the aqueous GaBr₃ solution at liquid nitrogen temperature shifts the equilibrium toward the aqua complex. The X-ray diffraction data at different subzero temperatures have shown a tendency of decreasing Ga³⁺–Br^? and increasing Ga³⁺–H₂O interactions with lowering temperature, confirming the preference of aqua Ga³⁺ in the supercooled liquid state as well as in the glassy state. The Ga³⁺–H₂O distance of ～1.8 Å for the tetrahedral coordination was found in a 2.01 M gallium(III) bromide solution with a [Br^?]/[Ga³⁺] ratio of 3.7 and gradually increased to a value of 1.92 Å for octahedral geometry with decreasing temperature, suggesting that equilibrium shifts from [GaBr₄]^? to [Ga(H₂O)₆]³⁺ through intermediate species, [GaBr _n ]^(3?n)+ (n = 2 and 3). The Ga³⁺–Br^? and Br^?–Br^? distances within [GaBr₄]^? with an almost tetrahedral symmetry are (2.35± 0.02) and (3.82± 0.03) Å, respectively. The Ga³⁺ has the second hydration shell at (4.03± 0.03) Å and the hydration of Br^? is characterized with a Br^?–H₂O distance of (3.35± 0.02) Å at all temperatures investigated.