Preparation and photolysis of polyamides having coumarin dimer component

The ring-opening polyaddition reaction of anti and syn head-to-head Coumarin dimers with diamines and the photocleavage behavior of the resulting polyamides were investigated. Anti head-to-head Coumarin dimer successfully reacted with aliphatic and aromatic diamines in an aprotic polar solvent to give corresponding high molecular weight polyamides. The polyamides showed good film forming ability and exhibited solubility behavior typical of polyelectrolytes. Furthermore, these polyamides were found to undergo exclusively asymmetric photocleavage on the cyclobutane rings in the polymer main chain to give a fumaramide unit with elimination of 2,2′-dihydroxystilbene. On the other hand, syn head-to-head Coumarin dimer gave only low molecular weight polyamides. These polymerization and photocleavage behaviors were elucidated in comparison with those of model reactions.     

First asymmetric total synthesis of tetrodotoxin

Tetrodotoxin, a toxic principle of puffer fish poisoning, is one of the most famous marine natural products because of the complex structure having many functional groups and its potent biological activity leading to death. Since the structure elucidation in 1964, this toxin has been recognized as a formidable target molecule for total synthesis. We have recently achieved the first asymmetric total synthesis from 2-acetoxy-tri-O-acetyl-d-glucal as a chiral starting material. The highly hydroxylated cyclohexane ring was constructed by Claisen rearrangement and regioselective hydroxylations of an acetone moiety and an intramolecular directed aldol condensation of the precursor having methyl ketone with dihydroxyacetone, which was synthesized through Sonogashira coupling. Installation of nitrogen functionality was unsuccessful through an attempted Overman rearrangement. We, therefore, employed a new intramolecular conjugate addition strategy between the carbamate and unsaturated ester groups. The alpha-hydroxyl lactone moiety was synthesized through an intramolecular epoxide opening by the Z-enolate of aldehyde, which was followed by oxidation-reduction of the resulting cyclic vinyl ether. The lactone was then converted to a protected ortho ester, and then gunanidinylation was followed by cleavage of the 1,2-glycol to give the fully protected tetrodotoxin. Selection of the protective groups has finally led us to accomplish the total synthesis of tetrodotoxin in an enantiomerically pure form. All the stereogenic centers were controlled with high selectivity, and the hydroxyl groups were differently protected to discriminate for the future analogue synthesis of a bioorganic program. The synthetic tetrodotoxin was purified by ion exchange chromatography and characterized to be identical with the natural compound.     

Development and prevalidation of a method for phenol determination by solid-phase spectrophotometry

A simple, sensitive and rapid solid-phase spectrophotometric procedure was developed for the determination of traces of phenol with 4-aminoantipyrine as a reagent (AAP-SPS), and the optimal experimental conditions were established. This method was performed by sorption and direct absorbance measurements of the product phenol-AAP sorbed on the anion-exchanger Dowex 1-X4 (0.2 g) at 495 nm (absorption maximum) and 700 nm (non-absorption wavelength). The sensitivity offered by the AAP-SPS procedure was higher by a factor of 40 compared with the respective conventional spectrophotometric method. Metrological characteristics were established using a prevalidation strategy. The AAP-SPS procedure is characterized by a linear calibration function in the working range of 0.05–0.50 μmol, low standard deviation of procedure (±0.012), low limit of determination (0.021 μmol), and favorable random (±0.85 to ±11.27%) and systematic deviations (−4.55 to +11.50%). Moreover, the accuracy of the system investigated by the recovery test is acceptable (99–102%). Favorable working and performance characteristics make the new SPS method ideal for phenol monitoring in pharmaceutical preparations as well as other matrices.     

Elucidation of solid-state complexation in ground mixtures of cholic acid and guest compounds

The solid-state complexation between cholic acid (CA) and either methyl p-hydroxybenzoate (MPB) or ibuprofen (IBP) was investigated. Powder X-ray diffractometry, IR spectroscopy and thermal analysis suggested the complex formation between CA and MPB as well as between CA and IBP by co-grinding method. The stoichiometry of CA-MPB was 1 : 1 while that of CA-IBP was 2 : 1, reflecting the effect of guest size on complex formation. The guest compounds were assumed to be included in the channel of complexes formed by hydrogen bonds among CA molecules.     

Thermodynamic theory of viscoelasticity

The relaxation spectra in polymers arise from the existence of many possible modes for dissipating the strain energy raised by the imposed force. These modes are made up by coupling the simplest and fastest mode of relaxation involving the rotation of a conformer, typically represented by the picosecond rotation of the carbon to carbon bond. This fast relaxation process cannot take place easily in the condensed state crowded by the densely packed conformers, necessitating cooperativity among them. The domain of cooperativity grows at lower temperatures, toward the infinite size at the Kauzman zero entropy temperature. From the temperature dependence of the domain size, the well-known Vogel equation is derived, which is numerically equivalent to the empirical WLF and free volume equations. The molar volume is a crucial factor in determining the molar free volume and, therefore, in determining theT _g of a material. The molar ΔC _P is proportional to the logarithmic molar volume, and is greater for a polymer with a higherT _g, but ΔC _P per gram for it is smaller, as it is proportional to (logM) divided byM, whereM is the molecular weight of the conformer. From this theory, it is possible to predict the dependence of the characteristic relaxation time on temperature if eitherT _g or the conformer size is known, since one can be derived from the other. From the Vogel equation with all parameters thus derived, it is possible to obtain a master relaxation curve and the spectrum from one set of dynamic mechanical data taken at one frequency over a range of temperatures. Whereas the linear viscoelastic principle is limited to small strains only, a real polymer is often deformed well beyond such a limit. Above a certain limit of strain energy level, linear viscoelastic deformation is no longer possible and the plastic deformation takes over. However, because a polymer typically manifests a spectrum of relaxation times, its behavior is a combination of viscoelastic and plastic behaviors. The ratio between the two behaviors depend on the rate of deformation, and can be precisely predicted from the linear viscoelastic relaxation spectrum. The combined behavior is termed viscoplasticity, and it applies to a wide range of practically important mechanical behaviors from the flow of the melt to the yield and fracture of glassy and crystalline solids.     

Synthesis and properties of a poly(diphenylacetylene) containing carbazolyl groups

1-(p-N-Carbazolylphenyl)-2-phenylacetylene (p-CzDPA) was polymerized by TaCl₅–co-catalyst systems (cocatalysts: n-Bu₁Sn, Et₃SiH, and 9BBN) to produce acetone-insoluble polymers in about 60-70% yields. Poly(p-CzDPA) was a yellowish-orange solid, most part of which was soluble in toluene, chloroform, etc., and its weight-average molecular weights were around 4×10⁵. This polymer formed a tough film by solution casting, and was thermally very stable (the onset temperature of weight loss in TGA in air 470°C). The oxygen per-meability coefficient of the polymer at 25°C was lower than two barrers. The present polymer showed photoconductivity and redox activity. © 1995 John Wiley & Sons, Inc.     

Reversible color changes in lamella hybrids of poly(diacetylenecarboxylates) incorporated in layered double hydroxide nanosheets

The present study is an investigation of a reversible thermal color change induced in lamella hybrids of poly(diacetylenecarboxylates) incorporated in layered double hydroxide (LDH) nanosheets. These poly-[m,n]/LDH hybrids prepared by the photo- or gamma-ray-induced polymerization of diacetylenecarboxylates, i.e., CH(3)(CH(2))(m)()(-)(1)CC-CC(CH(2))(n)()(-)(1)CO(2)(-) (mono-[m,n]), and intercalated in LDH lamella sheets, were observed to develop colors ranging from yellow to blue. The change in color was found to depend greatly on the alkyl carbon numbers of the mono-[m,n] (m,n = 10,11; 5,11; 10,5; 16,1) values. Moreover, the conformational alignment of the mono-[m,n] within the LDH was observed to be a crucial factor in color development, which was greatly affected by the intercalation degrees and extent of poly(ene-yne) linkage elongation of the polymers. For the poly-[m,n]/LDH hybrids investigated, a reversible color change was found to occur repeatedly and remarkably for the poly-[10,11]/LDH hybrid. This color change occurred at temperatures between ca. 20 and 80 degrees C back and forth from purple red to bright orange, in stark contrast to the irreversible color change for poly-[10,11] without LDH. Moreover, DSC and Raman spectroscopic studies of the LDH hybrids showed that the thermochromic temperature corresponded to the phase transition temperature of 80 degrees C. XRD analysis also indicated that the poly-[m,n]/LDH hybrid could retain its lamella structure during such thermochromic color changes, enabling conformational recovery in the polymer chains by a cooling down of the hybrids to temperatures lower than the transition temperature, while the nonhybrid poly-[10,11] powders exhibited an irreversible color change at 60 degrees C, above which the polymer powder turned amorphous.     

Molecular integrals of relativistic effects with gaussian-type orbitals

A mathematical analysis is presented of molecular integrals of relativistic interactions in molecules. The integrals are based on Gaussian-type orbitals and include those arising from variation of electron mass with velocity, one-electron Fermi contact interaction, electron spin-same-orbit interaction, electron spin-nuclear spin interaction, electron spin-spin contact interaction, electron spin-other-orbit interaction, electron spin-spin dipolar interaction and electron orbit-orbit interaction. The integrals are expressed in suitable forms for use in computer. It is also pointed out that the integrals are written essentially in terms of the overlap, nuclear attraction, electron repulsion, or field integrals.     

Biomimetic oxidation of alcohols by coenzyme PQQ-trimethyl ester

Oxidation of alcohols to corresponding carbonyl compounds by coenzyme PQQ-trimethyl ester was performed in the presence of aluminum t-butoxide or aluminum chloride under anaerobic conditions. Reduced PQQTME (PQQTMEH₂) was obtained by acidification of an aluminum complex of reduced PQQTME which was isolated in the reaction.     

Simultaneous determination of hypoxanthine,inosine, inosine-5′-phosphate and adenosine-5′-phosphate with a multielectrode enzyme sensor

A multielectrode enzyme sensor for the simultaneous determination of adenosine-5′-phosphate (AMP), inosine-5′-phosphate (IMP), inosine (HXR) and hypoxanthine (HX)in fish meat was developed by assembling four enzyme sensors for AMP, IMP, HXR and HX in a flow cell. These compounds were determined from oxygen consumption according to the following reactions: AMP $\text{AD}$ IMP $\text{NT}$ HXR $\text{NP, PO}{}^{\mathrm{3?}}{}_4$ HX $\text{XO, O}{}_2$ Uric acid where AD is AMP deaminase, NT is 5′-nucleotidase, NP is nucleoside phosphorylase and XO is xanthine oxidase. Enzymes were covalently bound to a membrane prepared from cellulose triacetate, 1,8-diamino-4-aminomethyloctane and glutaraldehyde. Sensors for HX, HXR, IMP and AMP were prepared by attaching membranes of XO, XONP, XO NPNT, and of XONPNT and AD, respectively, to four oxygen electrodes. Samples extracted from sea bass, bream, flounder, abalone and arkshell were analyzed within 5 min, from the simultaneous response curves of the four electrodes. Results obtained by the multisensor system were in good agreement with those determined by each single electrode.