REACTION OF SULFUR CHLORIDE WITH ACETOPHENONE. II

Abstract

In a previous paper,¹ we reported the formation of a resinous material (1) from the reaction of sulfur chloride with acetophenone which, upon treatment with DMF, yielded phenylglyoxylthiodimethylamide (4). We now report two additional resinous materials (5, 6), resulting from bromination of sodium phenacylthiosulfate (3) and diphenacyl disulfide (7) respectively, both of which not only resemble resinous 1 in appearance, but also yield 4 upon treatment with DMF in aqueous alkali.

Resinous 1, 5, and 6 appear to have the same common basic structure and differ only in the number of sulfur atoms bonded between the common units. Cleavage at the sulfur-sulfur bonds and elimination of hydrogen halide then yields identical oxothioamides from 1, 5, or 6. The latter appears to be a general reaction, and several oxothioamides were prepared by this synthetic method from 1, 5, and 6 and various amides and amines.     

Accurate mass measurement of low molecular weight compounds by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

We report the application of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) for the accurate measurement of mass of low molecular weight compounds (smaller than 1500 Da), a linear peptide, two types of cyclic depsipeptides, a polyhydroxy-macrocyclic lactone, and two prenylated flavonoids, with delayed extraction in the reflector mode. The performance of the MALDI-TOF instrument was less than those of fast atom bombardment and Fourier-transform ion cyclotron resonance mass spectrometry instruments and insufficient to give acceptable accuracy for literature reporting. Nevertheless, when combined with NMR spectrometry and/or amino acid analysis to give information on the numbers of carbon atoms and index of hydrogen deficiency, MALDI was useful for determination of the elemental composition of the low molecular weight compounds available in small quantities.     

Solid state reaction synthesis of filled skutterudite compounds (Ce or Y)yFexCo4-xSb12 and the effect of filling atoms Ce or Y on lattice thermal conductivity

The synthesis of filled skutterudite compounds (Ce or Y)_y(Fe)_x(Co)_(4x)(Sb)_(12), through a solidstate reaction using chloride of Ce or Y,high purity powder of Co, Fe, and Sb as starting materials,was investigated. (Ce or Y)_y(Fe)_x(Co)_(4x)(Sb)_(12) (x=0--1.0, y=0--0.15) compounds were obtained at850--1 123 K. The results of Rietveld analysis demonstrate that (Ce or Y)_y(Fe)_x(Co)_(4x)(Sb)_12synthesized by a solid state reaction possesses a filled skutterudite structure. The filling fraction ofCe or Y obtained by Rietveld analysis agrees well with the composition obtained by chemicalanalysis. The lattice constant of (Ce)_y(Fe)_x(Co)_(4x)(Sb)_(12) increases with increasing substitution of Fe at Cosites, and with an increasing Ce filling fraction in the Sb-dodecahedron voids. The lattice thermalconductivity of (Ce or Y)_y(Fe)_x(Co)_(4x)(Sb)_(12) decreases significantly with an increasing Ce or Y fillingfraction in the voids and with substitution of Fe at Co sites.     

Irradiation effects on hydrases for biomedical applications

To apply an irradiation technique to sterilize “Hybrid” biomedical materials including enzymes, we selected papain, a well-characterized plant endopeptidase as a model to examine durability of enzyme activity under the practical irradiation condition in which limited data were available for irradiation inactivation of enzymes. Dry powder and frozen aqueous solution of papain showed significant durability against ⁶⁰Co-gamma irradiation suggesting that, the commercial irradiation sterilizing method is applicable without modification. Although irradiation of unfrozen aqueous papain solution showed an unusual change of the enzymatic activity with the increasing doses, and was totally inactivated at 15 kGy, we managed to keep the residual activity more than 50% of initial activity after 30-kGy irradiation, taking such optimum conditions as increasing enzyme concentration from 10 to 100 mg/ml and purging with N₂ gas to suppress the formation of free radicals.     

Effects of acrylic acid incorporation on the pressure–temperature behavior and the calorimetric properties of poly(N-isopropylacrylamide) in aqueous solutions

 We studied the effects of pH on the pressure–temperature dependence of coil–collapse transition for aqueous solutions of copolymers of N-isopropylacrylamide and acrylic acid (Ac). At low pressures, the transition temperature (T _tr) increased with pressure, but T _tr decrease with increasing pressure at pressures higher than 50–100 MPa. By increasing the pH, the transition contour shifted to a higher temperature. When the Ac content was increased, the effects of pH became more evident. From a calorimetric study at atmospheric pressure, ΔH _tr was found to become smaller by increasing the portion of the ionized residues in the copolymer. The ratio to the van't Hoff enthalpy changes became larger with an increase in pH, which indicated that the production of charge decreased the cooperative domain size. Received: 19 July 1999 /Accepted in revised form: 7 September 1999     

Synthesis of end‐functionalized poly(phenylacetylene)s with well‐characterized palladium catalysts

End‐functionalized poly(phenylacetylene)s were synthesized by the polymerization of phenylacetylene (PA) using the well‐defined palladium catalysts represented as [(dppf)PdBr(R)] {dppf = 1,1′‐bis(diphenylphosphino)ferrocene}. The Pd catalysts having a series of R groups such as o‐tolyl, mesityl, C(Ph)?CPh₂, C₆H₄‐o‐CH₂OH, C₆H₄‐p‐CN, and C₆H₄‐p‐NO₂ in conjunction with silver triflate polymerized PA to give end‐functionalized poly(PA)s bearing the corresponding R groups in high yields. The results of IR and NMR spectroscopies and MALDI‐TOF mass analyses proved the introduction of these R groups at one end of each polymer chain. The poly(PA) bearing a hydroxy end group was applied as a macroinitiator to the synthesis of a block copolymer composed of poly(PA) and poly(β‐propiolactone) moieties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

A new biisoflavonoid from the roots of Erythrina variegata

A new biisoflavonoid, biseryvarin A (1a), together with two known compounds were isolated from the roots of Erythrina variegata. The structure of biseryvarin A was established on the basis of spectroscopic evidence. Biseryvarin A is the first dimeric isoflavonoid possessing isoprenoid groups from the genus Erythrina. Biseryvarin A showed low activity against methicillin-resistant Staphylococcus aureus (MRSA).     

Flow-injection determination of total organic fluorine with off-line defluorination reaction on a solid sorbent bed

Considering recent reports on widespread occurrence and concerns about perfluoroalkyl substances (PFAS) in environmental and biological systems, analysis of these compounds have gained much attention in recent years. Majority of analyte-specific methods are based on a LC/MS/MS or a GC/MS detection, however many environmental or biological studies would benefit from a total organic fluorine (TOF) determination. Presented work was aimed at developing a method for TOF determination. TOF is determined as an amount of inorganic fluoride obtained after defluorination reaction conducted off-line using sodium biphenyl reagent directly on the sorbent without elution of retained analytes. Recovered fluoride was analyzed using flow-injection system with either fluorimetric or potentiometric detection. The TOF method was tested using perfluorocarboxylic acids (PFCA), including perfluorooctanoic acid (PFOA), as model compounds. Considering low concentrations of PFAS in natural samples, solid-phase extraction as a preconcentration procedure was evaluated. Several carbon-based sorbents were tested, namely multi-wall carbon nanotubes, carbon nanofibres and activated carbon. Good sorption of all analytes was achieved and defluorination reaction was possible to carry out directly on a sorbent bed. Recoveries obtained for PFCAs, adsorbed on an activated carbon sorbent, and measured as TOF, were 99.5 ± 1.7, 110 ± 9.4, 95 ± 26, 120 ± 32, 110 ± 12 for C4, C6, C8, C10 and C12-PFCA, respectively. Two flow systems that would enable the defluorination reaction and fluoride determination in a single system were designed and tested.     

Collective dynamics of sub- and supercritical methanol by inelastic X-ray scattering

Inelastic X-ray scattering experiments have been performed on methanol as a function of density from ambient to the supercritical state. Positive dispersion of the sound velocity, as compared to the hydrodynamic values, is 50% in the ambient condition and decreases to zero at 0.50 g cm⁻³ over the momentum transfer Q = 1–10 nm⁻¹ with lowering density; however, it increases again with a further decrease in density down to 0.20 g cm⁻³in the supercritical state only in the Q-range above 5 nm⁻¹. These results have been interpreted as the formation of small oligomers in the low-density supercritical methanol.