Direct polyesterification with thionyl chloride in pyridine improved by a modification of monomer sequences in copolymers

The direct polyesterification with thionyl chloride (SOCl₂) in pyridine was further investigated. Copolycondensations of dicarboxylic acids, bisphenols, and hydroxybenzoic acids were significantly affected by the reaction temperatures and combinations of monomers which could change relative rates of alcoholyses of the activated dicarboxylic acids and the hydroxyacids consequently to vary monomer sequences in the copolymers resulted. The sequences were tried to be varied more directly by stepwise reactions of monomers in copolycondensations of dicarboxylic acids, bisphenols, and p-hydroxybenzoic acid (PHB), as well as PHB and m-hydroxybenzoic acid (MHB). The reactions proceeded smoothly and satisfactorily when carried out by initial reaction of dicarboxylic acids and PHB followed by bisphenols likely to favor sequential to random distributions of monomers. Reverse addition of PHB and bisphenols, and then dicarboxylic acids resulted in rapid precipitation due to some oligomerization of PHB at an earlier stage of reaction, and largely retarded the reaction. This was also the case for the copolycondensation of PHB and MHB. Copolymers of high inherent viscosities with up to 65 mol% PHB could be obtained by initial reaction of MHB followed by PHB.     

Enantiomeric separations of cationic and neutral compounds by capillary electrochromatography with monolithic chiral stationary phases of beta-cyclodextrin-bonded negatively charged polyacrylamide gels

Enantiomeric separation by capillary electrochromatography with beta-cyclodextrin-bonded negatively charged polyacrylamide gels was examined. The columns used are capillaries filled with a negatively charged polyacrylamide gel, a so-called monolithic stationary phase, to which allyl carbamoylated beta-CD (AC-beta-CD) derivatives covalently bind. The capillary wall is activated first with a bifunctional reagent to make the resulting gel bind covalently to the inner surface of the fused-silica tubing. Enantiomeric separations of 15 cationic compounds were achieved using the above-mentioned columns and mobile phases of 200 mmol l(-1) Tris-300 mmol I(-1) boric acid buffer (pH 7.0 or 9.0) or 200 mmol l(-1) Tris-300 mmol l(-1) boric acid buffer (pH 7.0) containing an achiral crown ether (18-crown-6). Enantiomeric separations of two neutral compounds were also achieved using 200 mmol l(-1) Tris-300 mmol l(-1) boric acid buffer (pH 9.0) as a mobile phase. High efficiencies of up to 150,000 plates m(-1) were obtained. Both the within- and between-run reproducibilities of retention time and separation factor were good. The reproducibilities of retention time and separation factor for three different columns prepared from a different batch of monomers were acceptable. The gel-filled capillaries were stable for at least 3 months with intermittent use, utilizing the mobile phase of 200 mmol I(-1) Tris-300 mmol I(-1) boric acid buffer (pH 9.0).     

Direct polycondensation of hydroxybenzoic acids with thionyl chloride in pyridine

The reaction promoted by thionyl chloride and pyridine could selectively activate carboxyl groups of hydroxybenzoic acids to give polyesters of high inherent viscosities up to 3.8. Favorable conditions were studied in terms of the temperatures for the initial reaction with the acids and subsequent aging at room temperature. Copolymers of several combinations of hydroxybenzoic acids with high molecular weights were obtained in quantitative yield by carrying out the polycondensation at 80°C for 3 h. The reaction could also produce high molecular polyesters in a simpler process without the initial activation of dicarboxylic acids by adding a mixture of these monomers to the condensing agent, and a tough film- and fiberforming polymer was obtained from 4,4′-dihydroxyphenylsulfone of low nucleophilicity whose polymer of high molecular weight is difficult to obtain. The process was also successfully applied to the direct copolycondensations of hydroxybenzoic acids, aromatic dicarboxylic acids, and bisphenols to produce polyesters of η_inh up to 5.6.     

Studies on the mechanism of 1,2-dihydropyrazin-2-one ring formation from dipeptidyl chloromethyl ketone and its chemical properties: immediate deamination during catalytic hydrogenation

1,2-Dihydropyrazin-2-one derivatives, which have two aminoalkyl groups at the positions 3 and 6, were found to be efficient tools for the construction of potent, selective and long-acting opioid mimetics. During the course of preparation, we found that the catalytic hydrogenation of 3,6-bis(benzyloxycarbonylaminomethyl)-5-methyl-1,2-dihydropyrazin-2-one to remove the benzyloxycarbonyl groups resulted in a side reaction. By MS and NMR studies and by preparation of additional 1,2-dihydropyrazin-2-one derivatives, the structure of the by-product was identified as 3-aminomethyl-5,6-dimethyl-1,2-dihydropyrazin-2-one. Preparation of additional compounds substituted with deuterium provided us with sufficient information to confirm the structure of the product and to support a cyclization mechanism in its formation.     

Heavenly blue anthocyanin II trans-4-0-(6-0-(trans-3-0-(β -d-glucopyranosyl)caffeyl)-β-d-glucopyranosyl)- caffeic acid,a novel component in heavenly blue anthocyanin

Structure of an alkaline hydrolysis product of heavenly blue anthocyanin was determined to be $\text{trans}$-4-0-(6-0-($\text{trans}$-3-0-(β-D-glucopyranosyl)caffeyl)-β-D- glucopyranosyl)caffeic acid ($\text{1}$).     

Oxidative cyclization of morusin

Oxidative cyclization of morusin (I) by using one-electron transfer oxidizing agents (manganese dioxide, silver oxide) afforded morusin hydroperoxide (II). A similar reaction was carried out in the presence of 2,4,6-tri-t-butylphenol, a radical quencher, to give compounds (IV, V, VI and VII) coupled with the 2,4,6-tri-t-butylphenoxy radical. On the basis of above results, the possible mechanism of this oxidative cyclization was discussed. In addition, morusin hydroperoxide (II) was also obtained by photo-sensitized oxidation of morusin (I) in the presence of sensitizers (Rose Bengal, hematoporphyrin). To elucidate the reaction mechanism similar reactions were carried out in the presence of radical quencher (2,4,6-tri-t-butylphenol) or singlet oxygen quencher (triethylenediamine). From these results, the possible mechanism of the formation of morusin hydroperoxide (II) from morusin (I) was discussed.     

Pyrimidine derivatives XII. A convenient preparation of 6-formylpyrimidinedione and 2- and 3-formylpyridine derivatives from corresponding nitrooxymethyl derivatives

The convenient preparation of 6-fomylpyrimidinedione derivatives and 2- and 3-formylpyridine are described. Thus, 5-bromo-1,3-dimethyl- ( 1a ), 5-bromo-3-methyl-1-(2-nitrooxyethyl)- ( 1b ), and 5-bromo-3-methyl-1-(3-nitrooxypropyl)-2,4(1H,3H)-pyrimidine-dione ( 1c ) were converted to the corresponding 6-formyl compounds 2a, 2b , and 2c , respectively, in excellent yields by the reaction with triethylamine and 1,4-diazabicyclo[2.2.2]octane. These 6-formylpyrimidinedione derivatives are key intermediates for the preparation of 6-carbon-carbon substituted compounds, which are expected to be potential antitumor and antiviral agents. Similarly, 2-(and 3-)formylpyridine ( 9a (and 9b )) were obtained by the reaction of 2-(and 3)nitrooxymethylpyridine ( 8a (and 8b )) with 1,4-diazabicyclo[2.2.2]octane.     

Synthesis of 3,3′-(1,6-hexanediyl)bis-pyrimidine derivatives and 3,4-dithia[6.6](1.3)pyrimidinophane

Several 3,3′-(1,6-hexanediyl)bis[6-methyl-2,4(1H,3H)-pyrimidinedione] derivatives ( 4a, 4b , and 4c ) were synthesized from 1,6-(hexanediyl)bis[6-methyl-2H-1,3-oxazine-2,4(3H)-dione] (3) . Compound 4c was converted to 6, which reacted with thiourea giving thiuronium salt 7 . 3,3′-(1,6-Hexanediyl)bis [1-(2-mercaptoethyl)-6-methyl-2,4(1H,3H)-pyrimidinedione] (9) was obtained by the hydrolysis of 7 , and then 9 was oxidized to 12,22-dimethyl-3,4-dithia[6.6] (1.3)-1,2,3,4-tetrahydro-2,4-dioxopyrimidinophane (10) .     

Hydrogen bonding in macrocyclic receptor systems

Abstract

The interactions of macrocyclic polyethers with alkali and alkaline earth cations have been well studied and much about their chemistry is now well understood. Less well examined or comprehended are hydrogen bond interactions. A combination of ion selective electrode binding constant determination techniques and fast atom bombardment mass spectrometry are brought to bear on this problem. It is found that all-oxygen crown ethers and their derivatives exhibit quite different complexation behaviour with ammonium salts than do their various azacrown counterparts.