Orientation-selected 15N-HYSCORE detection of weakly coupled nitrogens around the archaeal rieske [2Fe-2S] center

The weakly coupled 15N atoms around a reduced Rieske [2Fe-2S] cluster of the uniformly 15N-labeled, hyperthermostable archaeal Rieske protein appear to produce readily observable cross-peaks in the HYSCORE spectra, with the well-resolved couplings of 0.3-0.4 MHz for the Nepsilon and 1.1 MHz for the peptide backbone nitrogens, in addition to the contributions from the coordinated Ndelta atoms. These features can be used for structure-mechanism studies of the biological redox protein system involving the weakly coupled nitrogens in coupled electron-proton transfer reactions.     

Grinding-induced equimolar complex formation between thiourea and ethenzamide

We prepared and characterized a grinding-induced equimolar complex of thiourea with ethenzamide. When thiourea and ethenzamide were co-ground at a molar ratio of 3 : 1, new powder X-ray diffraction (PXRD) peaks were observed in addition to PXRD peaks of thiourea crystals. The optimum stoichiometry of the new structure was confirmed as 1 : 1 mol/mol. Effect of grinding time on the thiourea-ethenzamide equimolar complex formation was investigated by using PXRD, differential scanning calorimetry and Fourier transform infrared spectroscopy. The equimolar crystal structure was confirmed by X-ray diffraction measurements of the single crystal which was recrystallized from ethanol. It was found that the intermolecular hydrogen bond formations between thiourea and ethenzamide molecules contributed to the equimolar complex formation. The complex formation was not observed in the cases where benzamide, salicylamide or 3-ethoxybenzamide was co-ground with thiourea. 2-Alcoxyl benzamide structures should be required for the grinding-induced equimolar complex formation with thiourea.     

Electroorganic synthesis using a fluoride ion mediator under ultrasonic irradiation: synthesis of oxindole and 3-oxotetrahydroisoquinoline derivatives

[reaction: see text] Anodic intramolecular cyclization of alpha-(phenylthio)acetamides using a fluoride ion mediator was realized. Under ultrasonic irradiation, cyclization was accelerated markedly to give desired cyclized products in moderate to good yields. The local heating effect of ultrasonic irradiation seems to be more advantageous than usual heating.     

Highly sensitive determination of a polymeric hindered amine light stabilizer in polypropylene by reactive thermal desorption-gas chromatography using nitrogen-specific detection

Highly sensitive and specific determination of trace amounts of a polymeric hindered amine light stabilizer (HALS) in polypropylene (PP) materials could be established by improving reactive thermal desorption-gas chromatography (RTD-GC) in the presence of an organic alkali, tetramethylammonium hydroxide. By using nitrogen-phosphorus detection, highly selective detection of the HALS-related components was attained. In addition, the use of a polar poly(ethylene glycol) separation column alleviated the adsorption of minor specific pyrolysis products. This modified RTD-GC method allowed the determination of the polymeric HALS (Mr 1900) in PP even for trace concentrations between 100 and 500 ppm, through observing selectively the characteristic products containing a tetramethylpiperidine moiety, which had been impossible to detect under the previous RTD-GC conditions using a non-polar separation column and conventional flame ionization detection.     

Ab initio potential energy surfaces of the ion-molecule reaction: C2H2 + O+

High level ab initio calculations using complete active space self-consistent field and multi reference single and double excitation configuration interaction methods with cc-pVDZ (correlation consistent polarized valence double zeta) and cc-pVTZ (triple zeta) basis sets have been performed to elucidate the reaction mechanism of the ion-molecule reaction, C2H2(1Sigmag+) + O+(4S), for which collision experiment has been performed by Chiu et al. [J. Chem. Phys. 109, 5300 (1998)]. The minor low-energy process leading to the weak spin-forbidden product C2H2+ (2Piu) + O(1D) has been studied previously and will not be discussed here. The major pathways to form charge-transfer (CT) products, C2H2+ (2Piu) + O(3P) (CT1) and C2H2+ (4A2) + O(3P) (CT2), and the covalently bound intermediates are investigated. The approach of the oxygen atom cation to acetylene goes over an energy barrier TS1 of 29 kcal/mol (relative to the reactant) and adiabatically leads the CT2 product or a weakly bound intermediate Int1 between CT2 products. This transition state TS1 is caused by the avoided crossing between the reactant and CT2 electronic states. As the C-O distance becomes shorter beyond the above intermediate, the C1 reaction pathway is energetically more favorable than the Cs pathway and goes over the second transition state TS2 of a relative energy of 39 kcal/mol. Although this TS connects diabatically to the covalent intermediate Int2, there are many states that interact adiabatically with this diabatic state and these lead to the other charge-transfer product CT1 via either of several nonadiabatic transitions. These findings are consistent with the experiment, in which charge transfer and chemical reaction products are detected above 35 and 39 kcal/mol collision energies, respectively.     

Accurate mass measurement of low molecular weight compounds by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

We report the application of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) for the accurate measurement of mass of low molecular weight compounds (smaller than 1500 Da), a linear peptide, two types of cyclic depsipeptides, a polyhydroxy-macrocyclic lactone, and two prenylated flavonoids, with delayed extraction in the reflector mode. The performance of the MALDI-TOF instrument was less than those of fast atom bombardment and Fourier-transform ion cyclotron resonance mass spectrometry instruments and insufficient to give acceptable accuracy for literature reporting. Nevertheless, when combined with NMR spectrometry and/or amino acid analysis to give information on the numbers of carbon atoms and index of hydrogen deficiency, MALDI was useful for determination of the elemental composition of the low molecular weight compounds available in small quantities.     

Epitaxial Growth of Sr x Ba1 − x Nb2O6 Thin Films Prepared from Sol-Gel Process

In this study, we prepared Sr _x Ba_{1 – x} Nb₂O₆ (x = 0.3, 0.5 and 0.7) thin film on 0.75 wt% La doped SrTiO₃ (100) and (110) single crystal substrates. A homogeneous coating solution was prepared with Sr and Ba acetates and Nb(OEt)₅ as raw materials, and acetic acid and diethlene glycol monomethyl ether as solvents. The substrates were coated with the solution by spin coating method. As-coated thin films were heated from 973 to 1273 K in air. The grains of the thin film on La doped SrTiO₃ (100) were pillar shaped and arranged in right angle to each other. On the other hand, the grains of these thin films on La doped SrTiO₃ were pillar shape and arranged in one direction. The crystallographic relationship of the thin film between Sr _x Ba_{1 – x} Nb₂O₆ and substrate that the 130 and 310 direction of the thin film on the substrate were oriented with c-axis in parallel to the substrate surface. On the other hand, (hk0) phase diffractions of Sr _x Ba_{1 – x} Nb₂O₆ thin film on the substrate (110) were investigated in the XRD theta-2theta measurement. It is expected that the Sr _x Ba_{1 – x} Nb₂O₆ (x = 0.3, 0.5 and 0.7) were highly oriented or epitaxial growing on La doped SrTiO₃ (110) single crystal substrate.     

Fabrication of mesoporous ZnO nanosheets from precursor templates grown in aqueous solutions

Mesoporous ZnO nanosheets were successfully prepared by pyrolytic transformation of zinc carbonate hydroxide hydrate, Zn₄CO₃(OH)₆·H₂O. The nanosheets were initially formed as assemblies on glass substrates during chemical bath deposition (CBD) in aqueous solutions of urea and zinc acetate dihydrate, zinc chloride, zinc nitrate hexahydrate, or zinc sulfate heptahydrate at 80°C. It was key to induce heterogeneous nucleation of Zn₄CO₃(OH)₆·H₂O by promoting a gradual hydrolysis reaction of urea and controlling the degree of supersaturation of zinc hydroxide species. Morphology of Zn₄CO₃(OH)₆·H₂O was largely influenced by the anions present in the CBD solutions. The Zn₄CO₃(OH)₆·H₂O nanosheets were transformed into wurtzite ZnO by heating at 300°C in air without losing the microstructural feature.     

Nigellamines A3, A4, A5, and C, new dolabellane-type diterpene alkaloids, with lipid metabolism-promoting activities from the Egyptian medicinal food black cumin

New dolabellane-type diterpene alkaloids, nigellamines A(3), A(4), A(5), and C, were isolated from the methanolic extract of an Egyptian medicinal food, black cumin (the seeds of Nigella sativa). Their absolute configurations were determined on the basis of chemical and physicochemical evidence. Nigellamines were found to lower triglyceride levels in primary cultured mouse hepatocytes, and in particular, the activity of nigellamine A(5) was equivalent to that of the hypolipidemic agent, clofibrate.     

Rapid measurement of fish freshness indices by an amperometric flow-injection system with a 16-way switching valve and immobilized enzyme reactors

A novel flow-injection system is proposed for the rapid measurement of the fish freshness indices K₁ and K₂: K₁=[([HxR+[Hx])×100/([IMP]+[HxR]+[Hx])] and K₂=[[Hx]×100/([HxR]+[Hx])], where [IMP], [HxR] and [Hx] are inosine-5′-monophosphate, inosine and hypoxanthine concentrations, respectively. For the estimation of index K₁, 5′-nucleotidase immobilized reactor and nucleoside phosphorylase (NP)/xanthine oxidase (XO) coimmobilized reactor were incorporated in series in the flow-injection line made up by a 16-way switching valve with two sample loops. For the estimation of index K₂, NP and XO immobilized reactors were also incorporated in the similar flow-line. Two sample portions passed through the flow-line with different residence times so that two peaks were obtained. The first and second peaks obtained in the K₁-determining system corresponded to the total of HxR and Hx and the total of Hx, HxR and IMP, respectively. Similarly, the first and second peaks obtained in the K₂-determining system corresponded to Hx and the total of Hx and HxR, respectively. Therefore, the indices K₁ and K₂ can be estimated by

where i₁ and i₂ present the peak current of the first and second peaks, respectively, and f the ratio of the peak currents of the first and second peaks for a Hx standard solution. A sea bream was selected as a model fish and it was stored at 4 °C after death. A good correlation was found between the index K₁ and the storage time over a period of 400 h, with a correlation coefficient of 0.992, but no correlation between the index K₂ and the storage time. The measurements could be performed at a rate of 22 samples per hour with satisfactory precision (0.6–1.2% R.S.D.), without calibration for each species, accurate weighing of fish meat and any interferences in fish meat.