Structure of Aqueous Gallium(III) Bromide Solutions Over a Temperature Range 80–333 K by Raman Spectroscopy, X-ray Absorption Fine Structure, and X-ray Diffraction

The structure and complex formation of concentrated aqueous gallium(III) bromide (GaBr₃) solutions have been investigated over a temperature range 80–333 K by Raman spectroscopy, X-ray absorption fine structure (XAFS), and X-ray diffraction. The Raman spectra obtained at various [Br^?]/[Ga³⁺] molar ratios and temperatures have shown that complex formation between Ga³⁺ and Br^? occurs as a predominant species, with [GaBr₄]^? at [Ga³⁺] as high as 1～2 M (M = mol?dm ^?3) and [Br^?]/[Ga³⁺] ratios > ～2, and that cooling of the solutions favors the formation of the aqua Ga³⁺. The intermediate species were not seen in the Raman spectra. The XAFS data have revealed that the aqua complex has a sixfold coordination as [Ga(H₂O)₆]³⁺ with a Ga³⁺–H₂O distance of (1.96 ± 0.02) Å, whereas the [GaBr₄]^? complex has a Ga³⁺–Br^? distance of (2.33± 0.02) Å, and that vitrification of the aqueous GaBr₃ solution at liquid nitrogen temperature shifts the equilibrium toward the aqua complex. The X-ray diffraction data at different subzero temperatures have shown a tendency of decreasing Ga³⁺–Br^? and increasing Ga³⁺–H₂O interactions with lowering temperature, confirming the preference of aqua Ga³⁺ in the supercooled liquid state as well as in the glassy state. The Ga³⁺–H₂O distance of ～1.8 Å for the tetrahedral coordination was found in a 2.01 M gallium(III) bromide solution with a [Br^?]/[Ga³⁺] ratio of 3.7 and gradually increased to a value of 1.92 Å for octahedral geometry with decreasing temperature, suggesting that equilibrium shifts from [GaBr₄]^? to [Ga(H₂O)₆]³⁺ through intermediate species, [GaBr _n ]^(3?n)+ (n = 2 and 3). The Ga³⁺–Br^? and Br^?–Br^? distances within [GaBr₄]^? with an almost tetrahedral symmetry are (2.35± 0.02) and (3.82± 0.03) Å, respectively. The Ga³⁺ has the second hydration shell at (4.03± 0.03) Å and the hydration of Br^? is characterized with a Br^?–H₂O distance of (3.35± 0.02) Å at all temperatures investigated.     

On the selection of the optimal plasticizer for calix[n]arene-based ion-selective electrodes: Possible correlation between the ion selectivity and the ‘softness’ of the plasticizer

A criterion for the selection of a suitable plasticizer for calix[n]arene-based ion-selective electrodes is discussed. The cation selectivity of plasticized membranes without the ligand was first measured as a reference. The membranes can be roughly classified into two groups. The first group shows cation selectivity in the order Cs⁺+>K⁺>Na⁺>Li⁺. The membranes in the second group are made of phosphorus plasticizers, which show a selectivity in the reverse order. The plasticizers in the first group featured a linear relationship between the dipole moment of the plasticizer (calculated by a PM3 method) and the ratio of cesium selectivity to lithium selectivity. The linear relationship supports the view that the polar membrane which includes a soft plasticizer with a large dipole moment shows selectivity for Cs⁺, whereas the nonpolar membrane including the soft plasticizer with the small dipole moment shows much lower selectivity for Cs⁺. Next, 2-fluorphenyl-2-nitrophenyl ether (FPNPE) which showed the highest Cs⁺ selectivity and tris(2-ethylhexyl)phosphate (TEHP) which showed the highest Li⁺ selectivity were mixed in an appropriate ratio to make membranes with a different affinity for hard ions. The metal selectivities of several crown-based and calixarene-based ionophores were examined in these membranes. Although a few exceptions exist, the polar soft membrane is favorable when the interfering metal ion is hard, whereas the hard membrane is favorable when the interfering metal ion is soft.     

Dielectric relaxation in the paracrystalline phase in polyacrylonitrile

Thermal expansion and dielectric relaxation of polyacrylonitrile were measured in the temperature range from ?75 to 152°C. at frequencies from 30 cps to 3 Mc./sec. The thermal expansion curve and the temperature dependence of logarithmic relaxation time both show an inflection at 85°C. An x-ray study by Bohn reveals that this inflection comes from the thermal expansion of the paracrystalline phase of this polymer, and consequently the transition at 85°C. and the associated relaxation are ascribed to molecular motion in the paracrystalline phase. The relaxation strength increases with increasing temperature above this point. The transition is caused by freezing of the bending vibration of chains whereas the relaxation results from rotational vibration. The length of segments in this phase is roughly estimated to be ca. 100 A. by comparing the observed relaxation strength with the theory developed on the basis of the above considerations.     

One-pot preparation of chiral beta-amino esters by rhodium-catalyzed three-components coupling reaction

Chiral beta-amino esters are synthesized in one-pot from three components, amines, aldehydes, and ethyl bromoacetate, under the rhodium-catalyzed Reformatsky-type reaction condition, where complete diastereoselection is achieved in the nucleophilic addition step of ethyl bromoacetate to the imines prepared in     

Improvement of chemical analysis of antibiotics. X. Determination of eight tetracyclines using thin-layer and high-performance liquid chromatography

Analytical methods for eight tetracyclines (TCs) were established using silica gel high-performance thin-layer chromatography (HPTLC), reversed-phase thin-layer chromatography (RP-TLC) and high-performance liquid chromatography (HPLC). Good separations of eight TCs were obtained using chloroform-methanol-5% disodium ethylenediaminetetraacetate solution (65:20:5) (lower layer) and methanol acetonitrile 0.5 M oxalic acid solution (1:1:4) (pH 3.0) on silica gel HPTLC and C8 TLC plates, respectively. A combination of HPTLC and RP-TLC made possible the identification of the eight TCs. Each calibration graph was linear between 0.1 and 1.0 microgram using UV densitometry except for rolitetracycline. For detection reagents, the diazonium salts including Fast Violet B gave variously coloured spots with the eight TCs and good sensitivities were obtained except with minocycline. In HPLC, the simultaneous analysis of the eight TCs on a C8 column was possible using methanol-acetonitrile-0.01 M oxalic acid solution (1:1.5:7) adjusted to pH 3.0 as the mobile phase. A linear relationship was obtained between 1.0 and 10 ng using the usual sample preparation except for rolitetracycline. The direct determination of rolitetracycline was possible using tetrahydrofuran, dimethyl sulphoxide and the mobile phase as solvents for preparation of the sample. For the determination of residual rolitetracycline, it was effective to measure the amount of rolitetracycline as tetracycline by HPLC, HPTLC and RP-TLC after conversion of rolitetracycline to tetracycline by incubating for 5 min in methanol at 50 degrees C.     

Formation of Supramolecular Polymers Constructed by Cyclodextrins with Cinnamamide

-Cyclodextrin having cinnamamide at 6- or 3-positions (6-CiNH--CD, 3-CiNH--CD) and -cyclodextrin with cinnamamide on 6-position (6-CiNH--CD) have been prepared. Supramolecular structures were formed in the solid state or aqueous solutions and characterized by measurements of NMR and vapor pressure osmometry (VPO). The results indicate that 6-CiNH--CD formed insoluble supramolecular polymers in the solid state, while 6-CiNH--CD and 3-CiNH--CD formed supramolecular complexes in aqueous solutions. 6-CiNH--CD was found to form a dimer in an aqueous solution. 3-CiNH--CD formed intermolecular complexes to give supramolecular polymers. The differences of the position of guest part on cyclodextrins caused to give a variety of supramolecular structures in aqueous solutions.     

Dimethylsilyl ketene acetal as a nucleophile in asymmetric Michael reaction: enhanced enantioselectivity in oxazaborolidinone-catalyzed reaction

[reaction: see text] Dimethylsilanyl [Me2Si(H)] ketene S,O-acetal 6b is an effective nucleophile that retards the undesirable Si+-catalyzed racemic pathway in the oxazaborolidinone-catalyzed asymmetric Michael reaction. Through the further suppression of the Si+-catalyzed pathway by carrying out the reaction in the presence of 2,6-diisopropylphenol and t-BuOMe as additives, enantioselectivity up to 98% ee could be achieved for a variety of acyclic enones.