Novel des-fatty acyl-polymyxin B derivatives with Pseudomonas aeruginosa-specific antimicrobial activity

Polymyxin B (PMB) is a cationic cyclic decapeptide antibiotic with a fatty acyl (FA) modification at the α-amino group of Dab1 (Dab: L-α,γ-diaminobutyric acid). In this study, which is part of a series of PMB structure-activity relationship investigations focused on identifying clinically useful peptide antibiotics, we synthesized ten des-FA PMB derivatives whose N-terminal moieties were changed to basic or hydrophilic amino acids. The antimicrobial and lipopolysaccharide (LPS) binding activities of these synthetic analogs were tested. The analogs showed more potent antimicrobial activity against Pseudomonas aeruginosa (P. aeruginosa) compared with the PMB nonapeptide. In particular, [Ser2-Dap3]-PMB(2-10), Guanyl-[Thr2-Dab3]-PMB(2-10), Guanyl-[Dab1-Thr2-Dab3]-PMB(1-10), and N(α,γ)-diguanyl-[Dap3]-PMB(3-10) had antimicrobial activity equivalent to PMB. In LPS binding assays, the displacement curves shifted in a manner proportional to the number of positive charges available to bind to Escherichia coli (E. coli) and P. aeruginosa. Furthermore, peptides with basic side chains were comparable to PMB in binding activity assays against E. coli and P. aeruginosa. The acute toxicities of the peptides were evaluated by intravenously administering the peptides to mice through the tail vein. The toxicities of [Ser2-Dap3]-PMB(2-10), [Dap3]-PMB(3-10), and [Ser3]-PMB(3-10) were lower that of PMB (LD??, 4.8 μmol/kg).     

The effect of pressure on the phase transition behavior of tridecane, pentadecane, and heptadecane: a Fourier transform infrared spectroscopy study

The effect of pressure on the phase transition behavior of tridecane (C(13)), pentadecane (C(15)), and heptadecane (C(17)) has been investigated up to 489, 220, and 387 MPa, respectively, using Fourier transform infrared spectroscopy at 25 °C. The transition between the high pressure ordered (HPO) and high pressure rotator (HPR) phases has been observed in the pressure ranges of 270-220, 106-95, and 152-181 MPa for C(13), C(15), and C(17), respectively, and the transition between the HPR and liquid phases was observed in the pressure ranges of 171-112, 73-47, and 43-70 MPa for C(13), C(15), and C(17), respectively. The P(1)+P(3) band of the methylene rocking mode exhibits factor group splitting caused by intermolecular vibrational coupling. This was observed in both the HPO and HPR phases, while the P(1)+P(3) band did not split in the liquid phase. The separation of the peaks in the P(1)+P(3) band changed discontinuously at the HPO-HPR and HPR-liquid phase transitions, even though the separation is known to change continuously in the transition from the liquid to the high temperature rotator (HTR) phase. In the HPR phase, the ratio of the intensities of the higher and lower frequency components in the P(1)+P(3) doublet is roughly unity independent of pressure, while it is known to be much less than unity in the HTR phase. The separation of the P(1)+P(3) doublet in the HPR phase is found to be larger for longer alkanes. From the intensity ratio, a large proportion of alkane molecules is believed to participate in intermolecular vibrational coupling and possess herringbone-type short-range positional order in the HPR phase. Conversely, in the HTR phase only small proportion of alkane molecules participate in intermolecular vibrational coupling. From the pressure dependence of the separation of the doublet, intermolecular vibrational coupling and herringbone-type short-range positional order is considered to change discontinuously at the HPR-liquid phase transition, while they are reported to change continuously at the HTR-liquid phase transition. The HPR-liquid phase transition is governed by the effect of molecular packing while the HTR-liquid phase transition is predominantly governed by the difference in entropy between the herringbone-type and parallel-type packing.     

A Facile and Practical Procedure for the Synthesis of 8-Hydroxy-4-oxochroman Derivatives

Abstract: Novel 8-hydroxy-4-oxochroman derivatives were prepared from appropriate 4-chromanones via the Baeyer-Villiger oxidation followed by an intramolecular Fries rearrangement.     

Synthesis of phenylalkyl-substituted polyhydroxypiperidines as potent inhibitors for α-l-fucosidase

Synthesis and inhibitory activities against α-l-fucosidase of phenylalkyl-substituted polyhydroxypiperidines have been described. Among the newly synthesized compounds, 2,4,6-trichloro derivative (16q) showed very high inhibitory activity against α-l-fucosidase with IC₅₀ value of 0.005 μM, and K_i values of 0.0011 μM, respectively.     

Synthesis of Dibenzocyclooctadienes by Anodic Oxidation

the use of electrochemical oxidation was applied to the synthesis of dibenzocyclooctadiene lactones related to steganacin skeleton. This reaction, performed with compounds 1 and 2, led to results comparable with the oxidation with RuTFA, TTFA and VOF₃.     

Statistical fluctuation in zeta potential distribution of nanoliposomes measured by on‐chip microcapillary electrophoresis

The zeta potential of nanoliposomes with a diameter below 100 nm has been studied by the combined use of on‐chip microcapillary electrophoresis (μCE) and sensitive fluorescence imaging. Tracking the electrophoretic migration of individual nanoliposomes has enabled the accurate evaluation of the zeta potential distribution of nanoliposomes and the first observation of its abnormal broadening due to a statistical fluctuation phenomenon specific to the “nanoscale world.” The materials used for liposome preparation were phosphocholine as the neutral lipid, phosphatidylserine as the anionic lipid, and cholesterol. The size of the liposomes encapsulating calcein, a fluorescent dye used for imaging convenience, was tailored by extrusion through polycarbonate membrane filters of different pore sizes ranging from 50 to 1000 nm. The on‐chip μCE system comprised a μCE chip, a laser source, an inverted microscope, and an electron‐multiplying charge‐coupled device camera. The electrophoresis experiment using this system revealed that the relative standard deviation of the zeta potential distribution of nanoliposomes is inversely proportional to their diameter and apparently increases below 100 nm. This abnormal broadening of zeta potential distribution of nanoliposomes is explained by prominent discreteness effect of the number of anionic lipid molecules in nanoliposomes.     

Mesomorphic phase transitions and electro-optical properties of benzyl fluoroalkyl thioether liquid crystalline compounds

Four series of liquid crystalline (LC) compounds containing benzyl perfluoroalkyl thioether groups (BFT), 4-n-alkoxyphenylbenzyl perfluoroalkyl thioethers (nO-BBFT-FmF), 4-n-alkoxyphenylbenzyl perfluoroisoalkyl thioethers (nO-BBFT-FmIF), 4-n-propylcyclohexylbenzyl perfluoroalkyl thioethers (3-C1BFT-FmF) and 4-ethylcyclohexyl-3'-fluorobenzyl perfluoroalkyl thioethers (2-C1FBFT-FmF), were synthesized and their mesomorphic phase transitions and electro-optical properties investigated. nO-BBFT-FmF and nO-BBFT-FmIF have SmA, SmB and CrE phases, while 3-C1BFT-FmF and 2-C1FBFT-FmF showed a SmB phase. It was found that the appearance of a LC phase and the thermal stability were closely connected with the chemical structures of the rigid core part and the terminal groups. The electrooptical properties were investigated for BFT using ZLI-1132 as nematic solvent. Some of the BFT compounds have a good solubility of 15 wt % in ZLI-1132 and can be used as a component for lowering the refractive anisotropy (Delta n) of the host ZLI-1132 solvent.     

Low molecular weight aromatic compounds possessing nonflammable and flammable characteristics in calcium fluoride nanocomposite matrices after calcination at 800 °C

Calcium chloride reacted with potassium fluoride in the presence of low molecular weight aromatic compounds (ArH) such as bisphenol AF, bisphenol A, bisphenol F, biphenyl, and 1-(2-naphthyl)ethanol under alkaline conditions to afford new calcium fluoride/ArH composites. Dynamic light scattering and field emission scanning electron micrographs measurements show that these calcium fluoride/ArH composites are nanometer size-controlled fine particles and have a good dispersibility and stability in water, tetrahydrofuran, 1,2-dichloroethane, methanol, dimethyl sulfoxide, N,N-dimethylformamide, and 2-propanol. Interestingly, aromatic compounds possessing acidic hydroxyl groups in the calcium fluoride nanocomposites were found to exhibit a nonflammable characteristic even after calcination at 800 °C, although the corresponding aromatic compounds possessing neither acidic hydroxyl groups nor hydroxyl groups in the nanocomposites exhibited a usual flammable characteristic under similar conditions. In contrast, calcium fluoride/ArH nanocomposites, which were prepared under no catalytic conditions, afforded a clear weight loss corresponding to the contents of ArH in the composites to exhibit a usual flammable characteristic.

A Kinetic Investigation of Thermal Shrinkage of Aromatic Polymers by Thermomechanical Analysis

The kinetics of thermal shrinkage of the stretched polypyromellitimide (PI) films, Du Pont Kapton H, were investigated by thermomechanical analysis (TMA) at a constant rate of heating. The two-stage model of extended polymers has been applied to analyze the TMA data. The activation energy of the contraction reaction could be obtained from TMA curves at various heating rates. The one-step shrinkage of the 12.5% stretched PI film gives an activation energy of 10 kcal/mole for the first shrinking. From the 30% stretched sample, the second activation of contraction is 25 kcal/mole, and from 40% sample the third one is 33 kcal/mole. These three contraction reactions are observed successively for the TMA curves for highly stretched samples, and correspond to the various kinds of molecular motion of this special rigid polymer structure, which are also observed in the dynamic mechanical and dielectric properties of the same polymer.

Polypyromellitimide (PI) is a typical thermally stable polymer due to the rigid aromatic and heterocyclic ring structures in its backbone chain. This polymer is able to be cold-drawn in the glassy state, and it shrinks markedly on heating. The thermal shrinkage was investigated thermoanalytically by thermomechanical analysis (TMA) at a uniform heating rate. The activation energies of thermal shrinkage in three stages are estimated by this method.     

Synthesis and Characterization of Novel Methacrylic Copolymers: Determination of Monomer Reactivity Ratios

A new methacrylic monomer, 4‐nitro‐3‐methylphenyl methacrylate (NMPM) was prepared by reacting 4‐nitro‐3‐methyl phenol dissolved in methyl ethyl ketone (MEK) in the presence of triethylamine as a catalyst. Copolymerization of NMPM with methyl methacrylate (MMA) has been carried out in methyl ethyl ketone (MEK) by free radical solution polymerization at 70±1°C utilizing benzoyl peroxide (BPO) as initiator. Poly (NMPM‐co‐MMA) copolymers were characterized by FT‐IR, ¹H‐NMR and ¹³C‐NMR spectroscopy. The molecular weights (M_w and M_n) and polydispersity indices (M_w/M_n) of the polymers were determined using a gel permeation chromatograph. The glass transition temperatures (T_g) of the copolymers were determined by a differential scanning calorimeter, showing that T_g increases with MMA content in the copolymer. Thermogravimetric analysis of the polymers, performed under nitrogen, shows that the stability of the copolymer increases with an increase in NMPM content. The solubility of the polymers was tested in various polar and non‐polar solvents. Copolymer compositions were determined by ¹H‐NMR spectroscopy by comparing the integral peak heights of well separated aromatic and aliphatic proton peaks. The monomer reactivity ratios were determined by the Fineman‐Ross (r₁ =7.090:r₂=0.854), Kelen‐Tudos (r₁=7.693: r₂=0.852) and extended Kelen‐Tudos methods (r₁=7.550: r₂= 0.856).