Electrothermal atomic absorption spectrometric determination of cadmium in environmental samples with niobium wire preconcentration method

A preconcentration method by adsorption of cadmium on a niobium wire was developed for the environmental waters, followed by electrothermal atomic absorption spectrometry with a tungsten tube atomizer. After the preconcentration, the niobium wire was directly inserted into the tungsten tube atomizer. In the preconcentration (adsorption) process of cadmium, the optimal immersing time was 60?s. The effects of large amounts of concomitants on the preconcentration of cadmium were evaluated. When 10³–10⁴ fold excess of matrix elements existed in aqueous solution at pH 4 and 9, the cadmium response was profoundly affected by the matrix elements. However, the cadmium absorption signal was not significantly influenced at pH 7. Therefore, pH 7 was selected for the application into the real environmental samples. Under the optimal conditions, the detection limit (3S/N) for cadmium by the niobium wire preconcentration method was 7.0?pg?mL^?1 and the relative standard deviation was 6.8%. The method with preconcentration on a niobium wire was applied to the determination of cadmium in water and proved to be sensitive, simple and convenient. Because this preconcentration method can be utilized in the in situ treatment of trace cadmium in environmental water samples, it was unnecessary to carry the water samples to the analytical work place. The technique was shown to be useful for the determination of cadmium in environmental water samples at 0.1–1?µg?L^?1 levels.     

Partial crystalline transformation of solvated cellulose IIII crystals, reproduced by theoretical calculations

In hot-water molecular dynamics simulation at 370 K, four cellulose III_I crystal models, with different lattice planes and dimensions, exhibited partial crystalline transformations of (1 ?1 0) chain sheets, in which hydroxymethyl groups were irreversibly rotated from gt into tg conformations, accompanied by hydrogen-bond exchange from the original O3–O6 to cellulose-I-like O2–O6 bonds. The final hydrogen-bond exchange ratio was about 95 % for some of the crystal models after 50 ns simulation. The corrugated (1 ?1 0) chain sheet was converted to a cellulose-I-like flat chain sheet with a slightly right-handed twist. The 3D structures of the three types of isolated chain sheet models were optimized using density functional theory calculations to compare their stabilities without crystal packing forces. The cellulose Iβ (1 0 0) models were more stable than the cellulose III_I (1 ?1 0) models. The optimized structure of cellulose III_I (1 0 0) models deviated largely from the initial sheet form. It was proposed to the crystalline transformation from cellulose III_I to Iβ that conversion of the chain sheet structure first take place, followed by sliding of the chain sheet along the fiber axis.     

Enormously extended π-electronic conjugation system of dimeric octaethylporphyrin transmitted with anthracene

Based on the fact that anthracene (Anth) possesses much higher similarity in electron-releasing ability to porphyrin nucleus than the other polyacenes, the dimeric octaethylporphyrin (OEP) derivatives 4 and 5 (OEP–Anth–OEP) were synthesized and their structure–property relationships were examined, as compared with related OEP dimers 1–3. Among them, the derivative 4 showed enormously high electronic communication between two terminal OEP rings, potentially providing a suitable unit of the electronic structure for molecular design of the OEP devices operating with less energy and with higher sensitivity to outside stimuli.     

Recognition of caffeine by a water-soluble acyclic phane compound

Caffeine (1,3,7-trimethylxanthine) is a chemical substance associated with everyday human life. In order to recognize caffeine in water, six water-soluble acyclic phane compounds composed of three aromatic rings were examined as artificial receptors. ¹H NMR titration experiments revealed that 6,6′-[1,3-phenylenebis(carbonylimino)]bis-1,3-naphthalenedisulfonate had the highest binding ability for caffeine, with a binding constant (K_b) of 127±5 M⁻¹ at 300 K. While this phane compound also formed a complex with theophylline (1,3-dimethylxanthine) at around half the value of the binding constant for caffeine (K_b=64±4 M⁻¹), it showed weak or little complexation for adenosine, guanosine, inosine, and their 5′-phosphates (sodium salts of adenylic acid, guanylic acid, and inosinic acid).     

Polymeric saturable-absorber mirror for passive Q-switching of a laser-diode-pumped Nd3+:YVO4 microchip laser

A polymeric multilayered mirror doped with a saturable dye worked as a passive Q-switch of a laser-diode-pumped Nd(3+):YVO4 microchip laser. The multilayered mirror consisted of alternately spin-coated layers of polyvinylcarbazole (PVK) and cellulose acetate on a glass substrate. A dye of bis-(dimethylaminodithiobenzil)-nickel was doped in one of the layers of PVK, providing the repetitively Q-switched pulses. The pulse width and repetition rate were 4 ns and 68 kHz, respectively, for a laser-cavity length of 5 mm, and the average and the peak power were 40 mW and 156 W, respectively, for the highest pump power of 435 mW. The dependence of the Q-switched characteristics on the pump power and on the concentration of the doped dye is described.     

Detection of oxygen addition peaks for terpendole E and related indole–diterpene alkaloids in a positive‐mode ESI‐MS

This report describes that a regular positive electrospray ionization mass spectrometry (MS) analysis of terpendoles often causes unexpected oxygen additions to form [M + H + O]⁺ and [M + H + 2O]⁺, which might be a troublesome in the characterization of new natural analogues. The intensities of [M + H + O]⁺ and [M + H + 2O]⁺ among terpendoles were unpredictable and fluctuated largely. Simple electrochemical oxidation in electrospray ionization was insufficient to explain the phenomenon. So we studied factors to form [M + H + O]⁺ and [M + H + 2O]⁺ using terpendole E and natural terpendoles together with some model indole alkaloids. Similar oxygen addition was observed for 1,2,3,4‐tetrahydrocyclopent[b]indole, which is corresponding to the substructure of terpendole E. In tandem MS experiments, a major fragment ion at m/z 130 from protonated terpendole E was assigned to the substructure containing indole. When the [M + H + O]⁺ was selected as a precursor ion, the ion shifted to m/z 146. The same 16 Da shift of fragments was also observed for 1,2,3,4‐tetrahydrocyclopent[b]indole, indicating that the oxygen addition of terpendole E took place at the indole portion. However, the oxygen addition was absent for some terpendoles, even whose structure resembles terpendole E. The breakdown curves characterized the tandem MS features of terpendoles. Preferential dissociation into m/z 130 suggested the protonation tendency at the indole site. Terpendoles that are preferentially protonated at indole tend to form oxygen addition peaks, suggesting that the protonation feature contributes to the oxygen additions in some degrees. © 2014 The Authors. Journal of Mass Spectrometry published by John Wiley & Sons, Ltd.     

Direct Asymmetric Mannich‐Type Reaction of α‐Isocyanoacetates with Ketimines using Cinchona Alkaloid/Copper(II) Catalysts

The enantioselective direct Mannich‐type reaction of ketimines with α‐isocyanoacetates has been developed. Excellent yields and enantioselectivity were observed for the reaction of various ketimines and α‐isocyanoacetates using cinchona alkaloid/Cu(OTf)₂ and a base. Both enantiomers of the products could be obtained by using pseudoenantiomeric chiral catalysts. This process offers an efficient route for the synthesis of α,β‐diamino acids.     

一种经氟化和热处理在双壁碳纳米管上生成缺陷的方法(英文)

Nanoscale defects in the outer tube to preserve the electrical and optical features of the inner tube can be engineered to exploit the intrinsic properties of double walled carbon nanotubes (DWCNTs) for various promising applications. We demonstrated a selective way to make defects in the outer tube by the fluorination of DWCNTs followed by the thermal detachment of the F atoms at 1000 °C in argon. Fluorinated DWCNTs with different amounts of F atoms were prepared by reacting with fluorine gas at 25, 200, and 400 °C that gave the stoichiometry of CF0.20, CF0.30, and CF0.43, respectively. At the three different temperatures used, we observed preservation of the coaxial morphology in the fluorinated DWCNTs. For the DWCNTs fluorinated at 25 and 200 °C, the strong radial breathing modes (RBMs) of the inner tube and weakened RBMs of the outer tube indicated selective fluorine attachment onto the outer tube. However, the disappearance of the RBMs in the Raman spectrum of the DWCNTs fluorinated at 400 °C showed the introduction of F atoms onto both inner and outer tubes. There was no significant change in the morphology and optical properties when the DWCNTs fluorinated at 25 and 200 °C were thermally treated at 1000 °C in argon. However, in the case of the DWCNTs fluorinated at 400 °C, the recovery of strong RBMs from the inner tube and weakened RBMs from the outer tube indicated the selective introduction of substantial defects on the outer tube while preserving the original tubular shape. The thermal detachment of F atoms from fluorinated DWCNTs is an efficient way to make highly defective outer tubes for preserving the electrical conduction and optical activity of the inner tubes.     

Anisotropic Poisson Effect and Deformation-Induced Fluorescence Change of Elastic 9,10-Dibromoanthracene Single Crystals

Elastic organic crystals have attracted considerable attention as next-generation flexible smart materials. However, the detailed information on both molecular packing change and macroscopic mechanical crystal deformations upon applied stress is still insufficient. Herein, we report that fluorescent single crystals of 9,10-dibromoanthracene are elastically bendable and stretchable, which allows a detailed investigation of the deformation behavior. We clearly observed a Poisson effect for the crystal, where the short axes (b and c-axes) of the crystal are contracted upon elongation along the long axis (a-axis). Moreover, we found that the Poisson's ratios along the b-axis and c-axis are largely different. Theoretical molecular simulation suggests that the tilting motion of the anthracene may be responsible for the large deformation along the c-axis. Spatially resolved photoluminescence (PL) measurement of the bent elastic crystals reveals that the PL spectra at the outer (elongated), central (neutral), and inner (contracted) sides are different from each other.