Lifetime of living polymers in cationic polymerization. II. Living polymerization of isobutyl vinyl ether initiated by the hydrogen iodide/zinc halide systems

In the living cationic polymerization of isobutyl vinyl ether (IBVE) initiated by the hydrogen iodide/zinc halide (HI/ZnX₂; X = I, Br, Cl) systems, the concentration ([P^*]) of the living propagating species was determined by quenching with sodiomalonic ester ( 1 ). The quenching reaction was shown to be clean, instantaneous, and quantitative to give poly (IBVE) with a terminal malonate group from which [P^*] was obtained by ¹H-NMR spectroscopy. In the polymerizations in toluene below +25°C, [P^*] was constant and equal to the initial concentration ([HI]₀) of hydrogen iodide, independent of the type and concentrations of ZnX₂ as well as monomer conversion. At 0 and +25°C, however, the living species started decaying immediately after the complete consumption of monomer. In contrast, such a decay process was absent at ?15°C even in the absence of monomer until about an hour (depending on the conditions) after the end of polymerization. The deactivation reaction was first order in [P^*], and the lifetime (half-life) of the living species was longer at lower temperature and at lower ZnX₂ concentration. On the basis of these [P^*] and lifetime measurements, the HI/ZnX₂ systems were also compared with the HI/I₂ counterpart.     

A study of excited state molecular vibrations of aromatic hydrocarbons

Vibrational frequencies in excited and ionized states are calculated for primary aromatic hydrocarbons, on the basis of MO calculations of transition energies and normal coordinate calculations for ground state molecules. Results are in good agreement with experiment. Specific activities of certain types of modes, which exhibit large frequency shifts on excitation, are discussed in terms of vibronic coupling.     

Multifunctional coupling agents for living cationic polymerization. IV. Synthesis of end-functionalized multiarmed poly(vinyl ethers) with multifunctional silyl enol ethers

Telechelic ( 8 ) and end-functionalized four-arm star polymers ( 9 ) were synthesized through the coupling reactions of end-functionalized living poly(isobutyl vinyl ether) ( 5; DP _n ～ 10) with the bi-and tetrafunctional silyl enol ethers, H_4-nC? [CH₂OC₆H₄C(OSiMe₃) = CH₂]_n ( 3: n = 2; 4: n = 4). The precursor polymers 5 were prepared by living cationic polymerization with functionalized initiators, CH₃CH(Cl)OCH₂CH₂X(6), in conjunction with zinc chloride in methylene chloride at ?15°C. The initiators 6 were obtained by the addition of hydrogen chloride gas to vinyl ethers bearing pendant functional groups X , including acetoxy [? OC(O)CH₃], styryl (? OCH₂C₆H₄-p-CH = CH₂), and methacryloyl [? OC(O)C(CH₃) = CH₂]. The coupling reactions with 3 and 4 in methylene chloride at ?15°C for 24 h afforded the end-functionalized multiarmed polymers ( 8 and 9 ) in high yield (>91%), where those with styryl or methacryloyl groups are new multifunctional macromonomers. © 1994 John Wiley & Sons, Inc.     

Processing and characterization of Pb(Mg,Nb)O3-PbTiO3 thin films from metal alkoxide-derived gels

The sol-gel processing is one of promising methods to fabricate well-derived integrated thin films at relatively low temperature. Ferroelectric niobates films do afford the possibilities for adding the values by the hybridization with semiconductor and/or electro-optic systems. The molecular level designing of the precursor solution was stressed as well as the control of key processing factors. The advantages of this sol-gel have been extended to prepare the ferroelectric Pb(Mg, Nb)O₃-PbTiO₃ solid solution films integrated on Si wafers. The crystallization of the films with desired crystal structure could be promoted by the controlled partial hydrolysis of designed alkoxide solution in the intermediate state and the pre-heated treatment of alkoxide-derived films in flow of water vapor and oxygen gas mixture.     

Sol-Gel Processing of Transparent PLZT((Pb,La)(Zr,Ti)O3) Fibers

PLZT((Pb,La)(Zr,Ti)O₃) ceramic fibers were prepared by the sol-gel method from a solution of lead acetate trihydrate, lanthanum isopropoxide, zirconium n-propoxide and titanium isopropoxide containing 2-methoxyethanol as the solvent. The as-drawn gel fibers were pretreated in an autoclave and preheated in flowing H₂O vapor prior to the heat-treatment for crystallization. The effects of autoclaving and preheating in flowing H₂O vapor on the structure and composition of the resultant fibers were investigated. Optically transparent single phase perovskite PLZT fibers of 5–15 m in thickness and 5 cm in length were successfully prepared when the autoclave-treatment and the preheating in flowing H₂O vapor were conducted prior to crystallization. These treatments are thought to promote hydrolysis of the organic groups and polycondensation reaction in the gel fibers, leading to the successful formation of dense, crack-free transparent PLZT fibers.     

Collision-energy-resolved Penning ionization electron spectroscopy of p-benzoquinone: study of electronic structure and anisotropic interaction with He(*)(2 (3)S) metastable atoms

Collision energy dependence of partial ionization cross sections (CEDPICS) of p-benzoquinone with He(*)(2 (3)S) metastable atoms indicates that interaction potentials between p-benzoquinone and He(*)(2 (3)S) are highly anisotropic in the studied collision energy range (100-250 meV). Attractive interactions were found around the C==O groups for in-plane and out-of-plane directions, while repulsive interactions were found around CH bonds and the benzenoid ring. Assignment of the first four ionic states of p-benzoquinone and an analogous methyl-substituted compound was examined with CEDPICS and anisotropic distributions of the corresponding two nonbonding oxygen orbitals (n(O) (+),n(O) (-)) and two pi(CC) orbitals (pi(CC) (+),pi(CC) (-)). An extra band that shows negative CEDPICS was observed at ca. 7.2 eV in Penning ionization electron spectrum.     

Simultaneous two- and three-component determinations in multicomponent mixtures by extraction-spectrophotometry and thermochromism of ion-association complexes

A selective method of determination of amines and quaternary ammonium salts by solvent extraction and thermochromism of ion-association complexes has been established. The method is based on the formation of ion-association species with tetrabromophenolphthalein ethyl ester and the thermochromism effect in the organic phase at low temperature. The absorbance of the red amine charge-transfer complexes decreases quantitatively (DeltaA) with increase in temperature (DeltaT), and Delta A Delta T is characteristic of a particular species. This characteristic has been applied for the sensitive and selective determination of amines. The absorbance of the blue quaternary ammonium ion-association complexes does not vary with temperature, however, and the quaternary ammonium compounds can be determined without interference by amines because of the disappearance of the red species at 60 degrees . Methylephedrine, diphenhydramine, ephedrine (amines), benzethonium and/or berberine (quaternary ammonium compounds) in two- and three-component mixtures can be determined by using the thermochromism effect. The method is highly selective, sensitive and reproducible.     

Cationic polymerization of styrene by acetyl perchlorate: Molecular weight distribution of polystyrene and nature of the propagating species

To clarify the nature of the propagating species in cationic polymerization of styrene catalyzed by acetyl perchlorate, the molecular weight distribution of the polymer was investigated under various conditions. The molecular weight distribution curve for the polymer obtained in methylene chloride at 0°C showed a double peak phenomenon. This suggests that two or more kinds of propagating species participate simultaneously in the propagation reaction. The weight fraction W(H) of the polymer corresponding to the higher molecular weight peak increased with increasing polarity of the solvent. W(H) decreased when the concentration of the ionic species was increased either by an increase of the catalyst concentration or by the addition of the common salt such as tetra-n-butylammonium perchlorate. On the other hand, the position of the peak in the molecular weight distribution curve was independent of polymerization conditions. It was concluded that the higher molecular weight part of the polymer was produced under conditions for conductive to dissociation of the propagating species and the less dissociated propagating species was responsible for the lower molecular weight part of the polymer.