Preparation of highly dispersible and tumor-accumulative, iron oxide nanoparticles Multi-point anchoring of PEG-b-poly(4-vinylbenzylphosphonate) improves performance significantly

This paper describes the preparation of iron oxide nanoparticles, surface of which was coated with extremely high immobilization stability and relatively higher density of poly(ethylene glycol) (PEG), which are referred to as PEG protected iron oxide nanoparticles (PEG-PIONs). The PEG-PIONs were obtained through alkali coprecipitation of iron salts in the presence of the PEG-poly(4-vinylbenzylphosphonate) block copolymer (PEG-b-PVBP). In this system, PEG-b-PVBP served as a surface coating that was bound to the iron oxide surface via multipoint anchoring of the phosphonate groups in the PVBP segment of PEG-b-PVBP. The binding of PEG-b-PVBP onto the iron oxide nanoparticle surface and the subsequent formation of a PEG brush layer were proved by FT-IR, zeta potential, and thermogravimetric measurements. The surface PEG-chain density of the PEG-PIONs varied depending on the [PEG-b-PVBP]/[iron salts] feed-weight ratio in the coprecipitation reaction. PEG-PIONs prepared at an optimal feed-weight ratio in this study showed a high surface PEG-chain surface density (≈0.8 chainsnm(-2)) and small hydrodynamic diameter (<50 nm). Furthermore, these PEG-PIONs could be dispersed in phosphate-buffered saline (PBS) that contains 10% serum without any change in their hydrodynamic diameters over a period of one week, indicating that PEG-PIONs would provide high dispersion stability under in vivo physiological conditions as well as excellent anti-biofouling properties. In fact we have confirmed the prolong blood circulation time and facilitate tumor accumulation (more than 15% IDg(-1) tumor) of PEG-PIONs without the aid of any target ligand in mouse tumor models. The majority of the PEG-PIONs accumulated in the tumor by 96 h after administration, whereas those in normal tissues were smoothly eliminated by 96 h, proving the enhancement of tumor selectivity in the PEG-PION localization. The results obtained here strongly suggest that originally synthesized PEG-b-PVBP, having multipoint anchoring character by the phosphonate groups, is rational design for improvement in nanoparticle as in vivo application. Two major points, viz., extremely stable anchoring character and dense PEG chains tethered on the nanoparticle surface, worked simultaneously to become PEG-PIONs as an ideal biomedical devices intact for prolonged periods in harsh biological environments.     

Development of novel active acceptors possessing a positively charged structure for the transglycosylation reaction with Endo-M and their application to oligosaccharide analysis

With Boc-Asn-GlcNAc as a basic structure, four permanently positively charged kinds of new acceptors (GP-Boc-Asn-GlcNAc, GT-Boc-Asn-GlcNAc, HMP-Boc-Asn-GlcNAc, MPDPZ-Boc-Asn-GlcNAc) and five kinds of similar structure acceptors (2-PA-Boc-Asn-GlcNAc, 3-PA-Boc-Asn-GlcNAc, 4-PA-Boc-Asn-GlcNAc, HP-Boc-Asn-GlcNAc, PDPZ-Boc-Asn-GlcNAc) were synthesized as acceptors for the resolution of oligosaccharides in glycopeptides. The synthesized acceptors enzymatically reacted with Disialo-Asn (donor) in the presence of Endo-M. The reaction yields of each transglycosylation product were not obvious, because we do not have all the authentic Disialo-Asn-Boc-acceptors. Therefore, we used the peak area of the transglycosylation product detected by mass spectrometry and evaluated the utility of each acceptor. Among the Boc-Asn-GlcNAc acceptors, the positively charged MPDPZ derivative peak area was the highest, MPDPZ-Boc-Asn-GlcNAc with a positively charged structure showed about a 2.2 times greater sensitivity of the transglycosylation product compared to the conventional fluorescence acceptor DBD-PZ-Boc-Asn-GlcNAc. As a result, the MPDPZ-Boc-Asn-GlcNAc acceptor was suitable for the transglycosylation reaction with Endo-M. The development of a qualitative determination method for the N-linked oligosaccharides in glycoproteins was attempted by combination of the transglycosylation reaction and semi-micro high-performance liquid chromatography/electrospray ionization quadrupole time-of-flight tandem mass spectrometry (HPLC/ESI-QTOF-MS/MS). The asparaginyl-oligosaccharides in glycoproteins, liberated by treatment with Pronase E, were separated, purified and labeled with positively charged MPDPZ. The resulting derivatives were separated by a semi-micro HPLC system. The eluted N-linked oligosaccharide derivatives were then introduced into a QTOF-MS instrument and sensitively detected in the ESI(+) mode. Various fragment ions based on the carbohydrate units appeared in the MS/MS spectra. Among the peaks, m/z 782.37 corresponding to MPDPZ-Boc-Asn-GlcNAc is the most important one for identifying the asparaginyl-oligosaccharides. Disialo-Asn-Boc-MPDPZ was easily identified by the selected-ion chromatogram at m/z 782.37 by MS/MS detection. Therefore, the identification of N-linked oligosaccharides in glycoproteins seems to be possible by the proposed semi-micro HPLC separations followed by the QTOF-MS/MS detection. Furthermore, several oligosaccharides in ovalbumin and ribonuclease B were successfully identified by the proposed procedure.     

An MD simulation of the decoy action of Epstein�CBarr virus LMP1 protein mimicking the CD40 interaction with TRAF3

The Epstein?CBarr virus (EBV) is associated with a variety of malignancies and chronic active EBV infection is a severe systemic disease associated with high rates of mortality and morbidity. In this paper, the dynamics of the interaction of EBV-expressed latent membrane protein 1 (LMP1) with cellular signaling intermediate tumor necrosis factor receptor (TNFR)-associated factor 3 (TRAF3) is simulated using standard classical molecular dynamics (MD) protocols. For comparison, the dynamics of the interaction of TRAF3 with CD40, a TNFR mimicked by LMP1 to effect EBV infection is also calculated under similar conditions. Essential dynamics (ED) analysis is carried out to identify important degrees of vibrational freedom that relate to protein function and virus infection. Both the MD simulation and ED analysis reveal novel interactions that help explain the structural decoy action of LMP1 over CD40. These interactions involve the consensus sequence PXQXTXX shared by CD40 and LMP1. In LMP1, we have found novel interaction of Asp 209 with TRAF3 and the interaction is crucial although the adjacent Asp 210 was suggested to be essential by the X-ray analysis. In CD40, it is found that the hairpin formation is not indispensable for the interaction with TRAF3.     

Characteristics of Gain-Guided Laser Diodes with Cylindrical-Mirror Cavity

We have developed highly reliable etched-mirror laser diodes using a dry etching method. The lasers without facet-coating have been operating stably over 2500 h under automatic-power control (APC) at a power of 3 mW/facet at 50°C. The gain-guided laser diodes with a cylindrical-mirror cavity (CMC) have coaxial mirrors and a fan-shaped stripe structure. By decreasing the curvature radius of the inner facet or increasing the stripe width of the inner facet, the beam waist parallel to the junction plane can be moved outside of the laser diode, while the beam waist perpendicular to the junction plane stops at the mirror facet. A particular CMC laser has a low astigmatism of 4.1 μm and a low relative intensity of noise (RIN) less than –134 dB/Hz at 4 mW under 0–1% optical feedback without high frequency current superposition.     

Electrical resistivities of the uranium carbides

Electrical resistivities of arc-melted uranium carbides, UC, UC₂, U₂C₃ and UC + UC₂, were measured over the temperature range between 4 and 1900 K. The monocarbide, dicarbide and the mixture of carbides showed metallic character in their resistivity dependence on temperature above 30 K, while below this the resistivities were constant. U₂C₃ showed a knee in the resistivity curve at 54.0 K corresponding to a magnetic transition. Above 1100 K, the resistivity of U₂C₃ did not vary with temperature. The resistivity of the mixture (UC + UC₂ with U₂C₃ precipitates) showed an arrest between 800 and 950 K.     

Self-assembled octameric cage constructed by the potassium salt of p-tert-butylcalix[6]arene p-bromophenylalanine derivative in the solid state

Potassium salts of p-tert-butylcalix[6]arene p-bromophenylalanine derivative formed sizable octameric cages in the solid state that were revealed by X-ray crystallographic analysis.