Magnitude and directionality of interaction in ion pairs of ionic liquids: relationship with ionic conductivity

The intermolecular interaction energies of nine ion pairs of room temperature ionic liquids were studied by MP2/6-311G level ab initio calculations. The magnitude of the interaction energies of 1-ethyl-3-methylimidazolium (emim) complexes follows the trend CF(3)CO(2)(-) > BF(4)(-) > CF(3)SO(3)(-) > (CF(3)SO(2))(2)N(-) approximately PF(6)(-) (-89.8, -85.2, -82.6, -78.8, and -78.4 kcal/mol, respectively). The interaction energies of BF(4)(-) complexes with emim, ethylpyridinium (epy), N-ethyl-N,N,N-trimethylammonium ((C(2)H(5))(CH(3))(3)N), and N-ethyl-N-methylpyrrolidinium (empro) are not very different (-85.2, -82.8, -84.6, and -84.4 kcal/mol, respectively), while the size of the orientation dependence of the interaction energies follows the trend emim > epy approximately (C(2)H(5))(CH(3))(3)N > empro. Comparison with the experimental ionic conductivities shows that the magnitude and directionality of the interaction energy of the ion pairs play a crucial role in determining the ionic dissociation/association dynamics in the ionic liquids. The electrostatic interaction is the major source of attraction between ions. The induction contribution is small but not negligible. The hydrogen bonding with the C(2)-H of imidazolium is not essential for the attraction in the ion pair. The interaction energy of the BF(4)(-) complex with 1-ethyl-2,3-dimethylimidazolium (em2im) (-81.8 kcal/mol) is only 4% smaller than that of the emim complex.     

Reactions of 1,2-dimethoxytetramethyldisilane with styrenes: Formation of a new type of silacyclopentanes having phenyl substituents on ring carbons

The reaction of 1,2-dimethoxytetramethyldisilane with styrene and α-methylstyrene in the presence of NaOMe catalyst in tetrahydrofuran (THF) gave the new silacyclopentanes 1,1-dimethyl-2,4-diphenyl-1-silacyclopentane (IIIa) and 1,1,2,4-tetramethyl-2,4-diphenyl-1-silacyclopentane (IIIb), respectively. These silacyclopentanes were found to exist as cis-trans mixtures. The use of sodium metal in place of NaOMe afforded similar results. Reactions of a polysilane mixture, MeO-(SiMe₂)_nOMe (n ≧ 3), with the styrenes also gave similar results. In some cases, polysilacycloalkanes such as 1,2,3-trisilacyclopentanes (IV) and 1,2,3,4-tetrasilacyclohexanes (V) were obtained as by-products. A mechanism for the formation of the silacyclopentanes and polysilacycloalkanes is presented. It was found that electron impact decomposition of silacyclopentanes IIIa and IIIb, trisilacycloalkane IV and tetrasilacycloalkane V gave molecular ions corresponding to the silacyclopropane, cyclotrisilane and cyclotetrasilane systems.     

Synthesis of 4-[(1,3-diaminopyrrolo[3′,4′:4,5]pyrido[2,3-d]-pyrimidin-8-yl)benzoyl]-L-glutamic acid as a potential antifolate

This paper is dedicated to the memory of Professor Roland K. Robins The synthesis of 4-[(1,3-diaminopyrrolo[3′,4′:4,5]pyrido[2,3-d]pyrimidin-8-yl)benzoyl]-L-glutamic acid ( 18 ), a potential antifolate and anticancer agent, has been achieved starting from 1,4-dibromobutan-2-ol with alkyl p-aminobenzoic acids. Condensation of these two agents gave 1-(4-alkoxycarbonylphenyl)pyrrolidin-3-ols 7a,b , which were oxidized to the corresponding pyrrolidin-3-one derivatives 8a,b . Compounds 8a,b were converted into 1,3-diamino-8-(4-alkoxycarbonylphenyl)-7,8-dihydro-9H-pyrrolo[3′,4′:4,5]pyrido[2,3-d]pyrimidines 12a,b in 4 steps. Saponification of 12b the benzoate ester and coupling with di-tert-butyl glutamate afforded a mixture of 7,8-dihydro product 16 and its aromatized derivative 17 . Finally hydrolysis of esters 16 or 17 gave only the title compound 18 . The 7,8-dihydro tricyclic derivatives were easily air-oxidized to form their fully aromatized compounds. The title compound 18 was one tenth less active than MTX against HL-60 cells in culture.     

Infrared spectroscopic study on the reaction mechanism of CO hydrogenation over Pd/CeO2

In situ infrared spectroscopy was applied to elucidate the reaction mechanism of CO hydrogenation over Pd/CeO₂. Instead of direct dissociation of CO, a new reaction pathway is proposed for methane formation, involving geminal dicarbonyl intermediates and (HCO)₂(a) intermediates, which may be located on the surface of Pd covered with thin layers of reduced ceria (SMSI effect). Transformation of methane formation sites into methanol formation ones by the oxidation with water vapor formed during the CO?H₂ reaction is proposed, which may be located on the Pd (111) planes adjacent to ceria support.     

Emulsifier-free emulsion polymerization of tetrafluoroethylene by radiation. I. Effects of reaction conditions on the polymerization rate and polymer molecular weight

The radiation-induced emulsifier-free emulsion polymerization of tetrafluoroethylene was carried out at an initial pressure of 2–25 kg/cm², temperature of 30–110°C, and under a dose rate of 0.57 × 10⁴?3.0 × 10⁴ rad/hr. The rate of polymerization was shown to be proportional to 1.0 and 1.3 powers of the dose rate and initial pressure, respectively, and is maximal at about 70°C. The molecular weight of polytetrafluoroethylene (PTFE) lies in the range of 10⁵?10⁶, increases with reaction time in the early stage of polymerization, and is maximal at 70°C but is almost independent of the dose rate. An interesting discovery is that PTFE, a hydrophobic polymer, forms as a stable latex in the absence of emulsifier. When PTFE latex coagulates during polymerization under certain conditions, the polymerization rate decreases, probably because polymerization proceeds mainly on the polymer particle surface. The observed rate acceleration and successive increase in polymer molecular weight may be due to slow termination of propagating radicals in the rigid PTFE particles.     

Surface treatment of silicon carbide using TiO2(IV) photocatalyst

Silicon carbide (SiC) and diamond were decomposed to CO(2)(g) by the photocatalysis with TiO(2) at room temperature, although the decomposition rate of diamond was very slow. According to the XPS spectra of Si2p on the SiC surface, SiO(2) was simultaneously formed on the surface by the TiO(2) photocatalysis. The thickness of the SiO(2) formed on the SiC surface during the photocatalytic oxidation for 1 h was estimated to be about 40 A from the depth profile of the XPS spectra using Ar etching. The SiC surface was oxidized by the TiO(2) photocatalysis even under the condition without a direct contact with the TiO(2). This indicates that the photocatalytic oxidation of the SiC occurs due to active oxygen species photogenerated on the TiO(2) surface, but not by hole produced in the valence band of the TiO(2). Moreover, a remote surface treatment system using the quartz beads coated with TiO(2) was developed for the SiC surface oxidation. Consequently, the TiO(2) photocatalysis will be very useful for the surface treatment of SiC such as photopatterning without defects and damage to the substrate because the photocatalytic reaction is carried out under mild conditions.     

Synthesis of N3-substituted uridine and related pyrimidine nucleosides and their antinociceptive effects in mice

Seventy eight N(3)-substituted derivatives of uridine (1), thymidine (2), 2'-deoxyuridine (3), 6-azauridine (4), 2',3'-O-isopropylideneuridine (5), and arabinofuranosyluracil (6) were synthesized and their antinociceptive effects were evaluated. N(3)-(2',4'-Dimethoxyphenacyl)uridine (1l), N(3)-(2',4'-dimethoxyphenacyl)2'-deoxyuridine (3l), and N(3)-(2',5'-dimethoxyphenacyl)arabinofuranosyluracil (6m) possessed 93, 86, and 82% of the antinociceptive effects tested by hot plate, respectively. The antinociceptive effects of three derivatives were 5.8, 5.4, and 5.1-folds of the effect of N(3)-phenacyluridine (1h) (16%), respectively. The structure-activity relationship of N(3)-substituted pyrimidine nucleosides was also discussed.     

X-ray gated Mössbauer spectroscopic studies on57Co-labelled cobalt/II/ fluoride

KX-ray-gated emission Mössbauer spectra of⁵⁷Co-labelled CoF₂ and CoF₂.2H₂O were measured at room temperature, using the coincidence technique. A difference was found in the relative intensity of⁵⁷Fe(II)/⁵⁷Fe(III) between the X-ray-gated and non-gated emission spectra. The results are explained in terms of local radiolytic effects of water of crystallization and the chemical effects associated with the de-excitation processes caused by EC-decay.     

Preparation of immunoaffinity mini-columns for the analysis of platelet activating factor (PAF) in biological samples.

Using an antibody to BN 52719, an analogue of platelet activating factor (PAF), immunoaffinity mini-columns for the separation of PAF from biological samples were prepared. Rabbits were immunized with BN 52719 and immunoglobulin G (IgG) from the antiserum was coupled with Sepharose 4B. The resulting suspension of the IgG-coated Sepharose 4B in 25 mM phosphate buffer (pH 6.9) was poured into a plastic mini-column (bed volume 2.0 x 0.8 cm). Stepwise elution of the column with methanol revealed that lyso-PAF is eluted with 20-30% methanol in water whereas PAF is eluted with 50-80% methanol. For the determination of PAF in biological samples, it is recommended that lipids are extracted from the samples and the extract, reconstituted in 20% methanol, is loaded on the column. The column is then washed with 50% methanol followed by elution of PAF with 80% methanol. A small amount of [3H]PAF is added to the samples for measurement of the recoveries of PAF during the procedures of extraction and elution. The PAF is then quantified by radioimmunoassay or bioassay. Employing the immunoaffinity mini-column and radioimmunoassay, the contents of PAF in macrophages and conditioned medium after stimulation with calcium ionophore A23187, or tumor promoters such as TPA and thapsigargin, were measured.