High-resolution analysis of (Sc3C2)@ C80 metallofullerene by third generation synchrotron radiation X-ray powder diffraction

The X-ray structure of Sc(3)C(82) is redetermined by the MEM/Rietveld method by using synchrotron radiation powder data at SPring-8, where the C(2) encapsulated structure available to discuss the Sc-Sc interatomic distances has been determined. The encapsulated three scandium atoms form a triangle shape. A spherical charge distribution originating from the C(2) molecule is located at the center of the triangle. Interatomic distances between Sc and Sc are 3.61(3) A in the triangle. The distance between Sc and the center of the C(2) molecule is 2.07(1) A.     

Ladderlike ferromagnetic spin coupling network on a pi-conjugated pendant polyradical

A poly(9,10-anthryleneethynylene)-based polyradical with two pendant stable phenoxyls in one anthracene skeleton was newly synthesized via polymerization of the corresponding bromoethynylanthracene monomer using a Pd(0) catalyst. The average molecular weight of the polymer reached M(n) = 5 x 10(3) and was soluble in common organic solvents. The polyradical was prepared from the corresponding hydroxyl precursor polymer and was appropriately stable at room temperature. The ESR spectrum of the corresponding monomeric radical suggested an effectively delocalized spin density distribution on the backbone anthracene. The magnetization and the static magnetic susceptibility of the polyradical were measured using a SQUID magnetometer. The large average spin quantum number (S = (5)/(2)) of the polyradical indicated that the ferromagnetic spin coupling network of the polyradical had spread throughout the pi-conjugated chain and that it was considerably insensitive to spin defects.     

A helical amplification system composed of artificial nucleic acids

Herein we report an amplification system of helical excess triggered by nucleic acid hybridization for the first time. It is usually impossible to prepare achiral nanostructures composed of nucleic acids because of their intrinsic chirality. We used serinol nucleic acid (SNA) oligomers for the preparation of achiral nanowires because SNA oligomers with symmetrical sequences are achiral. Nanowire formation was confirmed by atomic force microscopy and size exclusion chromatography. When a chiral nucleic acid with a sequence complementary to SNA was added to the nanostructure, helicity was induced and a strong circular dichroism signal was observed. The SNA nanowire could amplify the helicity of chiral nucleic acids through nucleobase stacks. The SNA nanostructures have potential for use as platforms to detect chiral biomolecules under aqueous conditions because SNA can be readily functionalized and is water-soluble.

Herein we report an amplification system of helical excess triggered by nucleic acid hybridization for the first time.     

Stable metallic behavior and antiferromagnetic ordering of Fe(III) d spins in (EDO-TTFVO)2.FeCl4

We report the crystal structure and physical properties of the 2:1 FeCl4- salt of a new donor molecule, EDO-TTFVO. Crystal structure analysis of this salt revealed that the donor molecules formed a beta' '-type two-dimensional conducting layer, and there is a short S...Cl contact between the donor molecules and the FeCl4- ions, which is expected to mediate a strong pi-d interaction. This salt showed a stable metallic conducting behavior down to 0.3 K and an antiferromagnetic ordering at TN approximately 3.0 K, indicating that this salt becomes a new antiferromagnetic molecular metal at ambient pressure. The appearance of the magnetic ordering is considered to originate from the strong pi-d interactions between the donor molecules and the FeCl4- ions because the field dependence of magnetoresistances was remarkably affected below the antiferromagnetic transition temperature.     

Infrared spectroscopic study on the reaction mechanism of CO hydrogenation over Pd/CeO2

In situ infrared spectroscopy was applied to elucidate the reaction mechanism of CO hydrogenation over Pd/CeO₂. Instead of direct dissociation of CO, a new reaction pathway is proposed for methane formation, involving geminal dicarbonyl intermediates and (HCO)₂(a) intermediates, which may be located on the surface of Pd covered with thin layers of reduced ceria (SMST effect). Transformation of methane formation sites into methanol formation ones by the oxidation with water vapor formed during the CO-H₂ reaction is proposed, which may be located on the Pd (111) planes adjacent to ceria support.     

Trimethylsilyl-group containing polyphenylacetylenes for oxygen and ethanol permselective membranes

Phenylacetylenes having one or two trimethylsilyl groups at their benzene ring were synthesized, and polymerized by [Rh(cyclooctadiene) (PPh₃)₂]PF₆, [Rh(norbornadiene)Cl]₂, or WCl₆ to afford high molecular-weight polymers in high yields. These poly(phenylacetylene)s were soluble in many kinds of solvents and were fabricated to tough membranes by the solvent casting method. The oxygen permselectivities of these membranes were very good. The oxygen permeability coefficients (P_o2) and oxygen separation factors (α = P_o2/P_N2) of poly[2,4-(o,p)-bis(trimethylsilyl)phenylacetylene] [poly ( o-1-p-1 )] and poly[(4(p)-trimethylsilyl)phenylacetylene] [poly( p-1 )] membranes were 4.73 × 10^?8 cc(STP) cm/cm² s cmHg and 2.65, and 1.52 × 10^?8 cc(STP) cm/cm² s cmHg and 3.39, respectively. In the case of poly( o-1-p-1 ), P_o2 was comparable to that of polydimethylsiloxane (PDMS) and α was higher than that of PDMS. However, the P_o2 value reduced to 48% of its initial value in about 1 year. In the case of poly( p-1 ), the P_o2 value did not change in about 1 year. Ethanol permeated preferentially through these membranes (α^EtOH > 1) in pervaporation of aqueous ethanol solution, whereas poly(phenylacetylene) [poly( PhA )] showed water permselectivity (α^EtOH < 1). These favorable effects of trimethylsilyl groups on the oxygen and ethanol permselectivities were discussed on the basis of comparison with those of poly( PhA ), other poly(substituted phenyl-acetylene)s, and trimethylsilyl-group containing polystyrenes. © 1994 John Wiley & Sons, Inc.     

Highly selective electrochemical fluorination of organic compounds in ionic liquids

Recent studies on electrochemical partial fluorination in ionic liquid fluoride salts are reviewed. At first, historical background and some problems of electrochemical fluorination in organic solvents are briefly mentioned. Solvent-free electrochemical fluorinations in ionic liquids are explained as follows. Ultrasonication was found to improve both the yield and current efficiency for electrochemical fluorination of α-phenylthioacetate, which is mainly attributable to marked mass transport promotion of the substrate and the suppression of anode passivation. Highly regioselective and efficient fluorination of cyclic ethers, lactones, and cyclic carbonate was achieved in Et₄NF·4HF and Et₃N·5HF. Selective fluorination of hardly oxidizable phthalide was realized using a combination of imidazolium and fluoride ionic liquids. The unique effect of imidazolium ionic liquids on electrochemical fluorodesulfurization of 3-phenylthiophthalide was explained. Reuse of ionic liquids for electrochemical fluorination is also possible.     

Polymerization of (p‐vinylphenyl)hydrogalvinoxyl and formation of a stable polyradical derivative

4‐[(3,5‐Di‐tert‐butyl‐4‐hydroxyphenyl)(3,5‐di‐tert‐butyl‐4‐oxo‐cyclohexa‐ 2,5‐dienylidene)methyl]styrene (abbreviated as (p‐vinylphenyl)hydrogalvinoxyl) was polymerized using AIBN as an initiator to give a bright yellow polymer with M w = 3.2 × 10⁴. The polymer was oxidized to give the corresponding polyradical derivative, whose spin concentration could be increased up to about 70 mol % depending on oxidative conditions. ESR signal line‐width in the solid state was greatly increased below 200 K for the polyradical with a high spin concentration (> 50 mol %). The magnetization and magnetic susceptibility indicated weak antiferromagnetic interaction among the radical sites. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 189–198, 1999     

Reductive coupling of carbonyl compounds using lanthanum metal

We found that lanthanum metal was an excellent agent for the reduction of carbonyl compounds in the presence of a catalytic amount of iodine. When carbonyl compounds were treated with lanthanum metal in the presence of a catalytic amount of iodine, the reductive coupling of the carbonyl compounds proceeded efficiently to afford the corresponding vic‐diols in moderate to good yields. © 2000 John Wiley & Sons, Inc. Heteroatom Chem 11:81–85, 2000     

Orientation dependence of surface energy change on ordering in Ni4Mo alloy

The surface energy change (Δ?_s) on ordering in a Ni₄Mo alloy has been investigated by atomistic calculation based on a broken bond model coupled with Bragg-Williams approximation. A complete contour map showing orientation dependence of Δ?_s on ordering is presented. The features in the contour map of Δ?_s are described.