ALL-trans β-CAROTENE-5,6-EPOXIDE IN THYLAKOID MEMBRANES

All- trans β-carotene-5,6-epoxide has been found in the thylakoid membranes of spinach and of the cyanobacterium Synechococcus vulcanus Copeland. The epoxide was extracted from the thylakoid membranes with acetone, and was isolated by high-performance liquid chromatography (HPLC). The structure of the epoxide was identified by means of mass, Raman, and electronic absorption spectroscopy. Changes in the amount of the epoxide, as a result of epoxidation and (apparent) de-epoxidation reactions in the membranes, were traced by analysis of extracts on HPLC. In isolated thylakoid membranes, only the epoxidation reaction took place. The reaction was caused by irradiation or by the addition of ferricyanide, suggesting that electron transport reactions in the membranes are involved in the epoxidation. In intact spinach leaves, however, both epoxidation and de-epoxidation took place; the extent of epoxidation correlated with the intensity of light incident on the leaves. The epoxidation and de-epoxidation of all- trans β-carotene are contrasted with those of xanthophylls (in the violaxanthin cycle).     

Proton-ionizable crown compounds. 11. Synthesis of macrocyclic ligands containing two sulfonamide groups and chloro substituents or pyridine subcyclic units and a preliminary study of cation transport by three of these ligands

Five new macrocyclic ligands each containing two sulfonamide groups have been prepared. Three of these compounds contain one or two chloro substituents and the other two have one or two pyridine subcyclic units. A seventeen-membered ring ligand (4) was found to be an excellent transport agent for all alkali metal cations in a water-methylene chloride-water bulk liquid membrane system when the pH of the source phase was 13 or higher. The chlorine-substituted analog (5) was a poor transport agent for the alkali metal cations possibly because the chlorine atom blocked entry to the macrocycle cavity. An open-chain analog containing two sulfonamide groups was particularly effective in transporting cesium ions.     

Synthesis of 2-azabicyclo[2.1.0]pentanes by the intramolecular nucleophilic substitution of cyclopropylmagnesium carbenoids with magnesium anilide

A variety of 2-azabicyclo[2.1.0]pentanes were synthesized by the intramolecular nucleophilic substitution of cyclopropylmagnesium carbenoids with magnesium anilide. The 1-chlorocyclopropyl p-tolyl sulfoxides possessing an N-aryl-substituted aminomethyl group were prepared from dichloromethyl p-tolyl sulfoxide, α,β-unsaturated carboxylic acid esters, and anilines in four steps. The deprotonation of the amine with t-BuMgCl followed by sulfoxide/magnesium exchange of the sulfoxides with i-PrMgCl led to the generation of the cyclopropylmagnesium carbenoids possessing a magnesium anilide moiety. Subsequent intramolecular nucleophilic substitution of the cyclopropylmagnesium carbenoids occurred in a 4-exo-tet manner to give the 2-azabicyclo[2.1.0]pentanes. The optically active 2-azabicyclo[2.1.0]pentane was synthesized using a p-tolylsulfinyl group as a chiral auxiliary.     

Preparation of palladium clusters protected by silica-supported,crosslinking, partially phosphorylated poly(vinyl alcohol) and their catalytic activity

The palladium cluster protected by silica-supported, crosslinking, partially phosphorylated poly(vinyl alcohol) (P-PVA) was prepared from a crosslinking P-PVA–Pd(II) complex by reduction in alcohol. The P-PVA–Pd complex and the palladium cluster protected by P-PVA were analyzed by electron spectroscopy, X-ray photoelectron spectrometry and transmission electron microscopy. The complex formation between the Pd(II) ion and phosphoric acid groups in P-PVA was important in the formation of a fine palladium cluster. Palladium clusters protected by silica-supported crosslinking P-PVA were used as catalysts for the hydrogenation of nitrobenzene or acrylic acid at 30°C under atmospheric pressure. The palladium cluster protected by crosslinking P-PVA supported on silica was the most active catalyst, was stable and had no by-products, compared with the palladium cluster protected by silica-supported noncrosslinking P-PVA or PVA.     

Radiation-induced emission from golden hamster embryo cells

Emission from high-energy-electron-irradiated golden hamster embryo (GHE) cells has been studied over the temperature range 12–300 K both by a one-shot-single-photon-counting method and by photocurrent measurements with an oscilloscope. Emission from the irradiated phosphate buffered saline (PBS) also has been studied. The emission spectra from PBS at 12 and 77 K show a maximum around 330 and 380 nm, respectively, which are the same spectra as those from irradiated pure H₂O. The emission from irradiated GHE consists of the new band at 480 nm in addition to the emission from H₂O. The 480 nm emission is observed at the temperature range of 12–300 K, though the emission at 300 K is much lower than that at low temperature. The 480 nm emission is ascribed to the transition from excited organic substances in GHE cells. The intensity of 480 nm emission at 300 K increases linearly with increasing irradiation-dose in the range of 11–600 Gy.     

Resistance properties of a macroporous silica-based N,N,N′,N′-tetraoctyl-3-oxapentane-1,5-diamide-impregnated polymeric adsorption material against nitric acid, temperature and γ-irradiation

The resistance of a novel silica-based N,N,N′,N′-tetraoctyl-3-oxapentane-1,5-diamide (TODGA) polymeric adsorption material (TODGA/SiO₂-P) against nitric acid, temperature and γ-irradiation had been investigated. The adsorption property of the treated TODGA/SiO₂-P was evaluated by a 3 M HNO₃ solution containing 0.01 M Nd(III). It was found that both 3 and 0.01 M HNO₃ concentrations did not decrease the stability of TODGA/SiO₂-P at 25°C. The quantity of TODGA leaked from TODGA/SiO₂-P was equivalent to its solubility in the corresponding HNO₃ aqueous solution. The effect of 3 M HNO₃ on the leakage of TODGA at 80°C was significantly higher than that in 0.01 M HNO₃ as well as in all cases at 25°C. The amount of Nd(III) adsorbed towards the treated TODGA/SiO₂-P was determined in the range of 0.143–0.148 mmol/g for the HNO₃ concentration effect and 0.142–0.0506 mmol/g for the temperature effect. γ-Irradiation showed a more noticeable destruction effect on TODGA/SiO₂-P. The content of TODGA leaked increased with an increase in the γ-irradiation dose (ID) from 1.06 to 3.72 MGy in terms of the linear equation [TODGA]=794.5ID+84.0. The amount of Nd(III) adsorbed onto the irradiated TODGA/SiO₂-P decreased rapidly from 0.134 to 0.0438 mmol/g, which was lower than 0.153 mmol/g, the adsorption of fresh TODGA/SiO₂-P for Nd(III), according to the equation Q_Nd(III)=−0.0301ID+0.160, showing that a large quantity of TODGA leaked from TODGA/SiO₂-P. The adsorbed amount of Nd(III) decreased obviously in this order: the HNO₃ concentration effect, temperature effect and γ-irradiation.     

DNA Origami Scaffolds as Templates for Functional Tetrameric Kir3 K+ Channels

In native systems, scaffolding proteins play important roles in assembling proteins into complexes to transduce signals. This concept is yet to be applied to the assembly of functional transmembrane protein complexes in artificial systems. To address this issue, DNA origami has the potential to serve as scaffolds that arrange proteins at specific positions in complexes. Herein, we report that Kir3 K⁺ channel proteins are assembled through zinc‐finger protein (ZFP)‐adaptors at specific locations on DNA origami scaffolds. Specific binding of the ZFP‐fused Kir3 channels and ZFP‐based adaptors on DNA origami were confirmed by atomic force microscopy and gel electrophoresis. Furthermore, the DNA origami with ZFP binding sites nearly tripled the K⁺ channel current activity elicited by heterotetrameric Kir3 channels in HEK293T cells. Thus, our method provides a useful template to control the oligomerization states of membrane protein complexes in vitro and in living cells.     

Induction and Acceleration of Bonelike Apatite Formation on Tantalum Oxide Gel in Simulated Body Fluid

Untreated tantalum metal forms bonelike apatite layer on its surface in a simulated body fluid (SBF) after a long period. The apatite formation on the tantalum metal is significantly accelerated, when the metal was previously subjected to NaOH and heat treatments to form an amorphous sodium tantalate on its surface. The fast formation of the apatite on the NaOH- and heat-treated tantalum metal was explained as follows. The sodium tantalate on the surface of the metal releases the Na⁺ ion via exchange with H₃O⁺ ion in SBF to form a lot of Ta-OH groups on its surface. Thus formed Ta-OH groups induce the apatite nucleation and the released Na⁺ ion accelerates the apatite nucleation by increasing ionic activity product of the apatite in SBF due to increase in OH^– ion concentration. In the present study, in order to confirm this explanation, apatite formations on sodium tantalate gels with different Na/Ta atomic ratios, which were prepared by a sol-gel method were investigated. It was found that even Na₂O-free tantalum oxide gel forms the apatite on its surface in SBF. This proves that the Ta-OH groups abundant on the gel can induce the apatite nucleation. The apatite-forming ability of the gels increased with increasing Na/Ta atomic ratios of the gels. The sodium-containing tantalum oxide gels released the Na⁺ ion, the amount of which increased with increasing Na/Ta atomic ratios of the gels. The released Na⁺ ion gave an increase in pH of SBF. These results prove that the apatite nucleation induced by the Ta-OH groups is accelerated with the released Na⁺ ion by increasing ionic activity product of the apatite in SBF.